Prof. Dr. NURŞEN SAKLAKOĞLU

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

The Effect of Heat Treatment on The Wear and Corrosion Behavior of AISI 440B Martensitic Stainless Steel in Different Environments

SAKLAKOĞLU N., Eyici G., ASLAN N., Hocalar Ç., Çimen O.

Transactions of the Indian Institute of Metals , cilt.78, sa.2, 2025 (SCI-Expanded)

Selective laser melting of Ti6Al4V alloy: Effect of post-processing on fatigue life, residual stress, microstructure, microhardness and surface roughness

ÖNDER S., SAKLAKOĞLU N., Sever A.

Materials Characterization , cilt.196, 2023 (SCI-Expanded)

Selective laser melting of Ti6Al4V alloy: Effects of process parameters at constant energy density on mechanical properties, residual stress, microstructure and relative density

ÖNDER S., SAKLAKOĞLU N.

Materialpruefung/Materials Testing , cilt.65, sa.2, ss.162-173, 2023 (SCI-Expanded)

Experimental evaluation and FE simulation of phase transformations and tensile stresses in hot forging and controlled cooling

Hocalar C., SAKLAKOĞLU N., Demirok S.

Kovove Materialy , cilt.60, sa.4, ss.257-266, 2022 (SCI-Expanded)

The effect of thermomechanical process on metallurgical and mechanical properties of 38MnVS6 micro alloyed steel Einfluss des thermomechanischen Prozesses auf die metallurgischen und mechanischen Eigenschaften von mikrolegiertem 38MnVS6-Stahl

Erçayhan Y., SAKLAKOĞLU N.

Materialwissenschaft und Werkstofftechnik , cilt.52, sa.6, ss.644-654, 2021 (SCI-Expanded)

Effects of shot peening and artificial surface defects on fatigue properties of 50CrV4 steel

SAKLAKOĞLU N., Bolouri A., Irizalp S. G., Baris F., Elmas A.

International Journal of Advanced Manufacturing Technology , cilt.112, sa.9-10, ss.2961-2970, 2021 (SCI-Expanded)

Effect of Shot Peening on Residual Stress Distribution and Microstructure Evolution of Artificially Defected 50CrV4 Steel

Gencalp Irizalp S., SAKLAKOĞLU N., Baris F., KAYRAL S.

Journal of Materials Engineering and Performance , cilt.29, sa.11, ss.7607-7616, 2020 (SCI-Expanded)

Characterization of hot forged P285NH steel by metallurgical investigation and reliability analysis Charakterisierung von warmgeschmiedetem P285NH-Stahl durch metallurgische Untersuchungen und Zuverlässigkeitsanalyse

SAKLAKOĞLU N., ÇİVİ C., Hocalar Ç., Demirok S.

Materialwissenschaft und Werkstofftechnik , cilt.51, sa.9, ss.1242-1250, 2020 (SCI-Expanded)

Effect of the surface nanocrystallization on tribological behavior of the Cu based bimetallic materials (CuPbSn)

GENÇER G. M., YOLCU C., KAHRAMAN F., SAKLAKOĞLU N.

Materials Research Express , cilt.6, sa.11, 2019 (SCI-Expanded)

Performance of Fe-based hardfacings on hot forging die: Experimental, numerical and industrial studies

SAKLAKOĞLU N., İRİZALP S., Dogan S., Ildas G., SAKLAKOĞLU İ. E.

Kovove Materialy , cilt.56, sa.1, ss.15-27, 2018 (SCI-Expanded)

High strength and high ductility behavior of 6061-T6 alloy after laser shock processing

Gencalp Irizalp S., SAKLAKOĞLU N.

Optics and Lasers in Engineering , cilt.77, ss.183-190, 2016 (SCI-Expanded)

Laser shock processing of 6061-T6 aluminium alloy: Thermal modelling and analysis

Zafar H., SAKLAKOĞLU N., İRİZALP S., Khan S., Shuja S., Boran K., et al.

Lasers in Engineering , cilt.33, sa.1-3, ss.157-180, 2016 (SCI-Expanded)

Investigation of wear behaviour of thixoformed and conventional gravity cast AlSi8Cu3Fe alloys

SAKLAKOĞLU N., Irizalp S. G., Ercayhan Y., Birol Y.

Industrial Lubrication and Tribology , cilt.66, sa.1, ss.46-50, 2014 (SCI-Expanded)

Characterization of microplastic deformation produced in 6061-T6 by using laser shock processing

Gencalp Irizalp S., SAKLAKOĞLU N., Yilbas B. S.

International Journal of Advanced Manufacturing Technology , cilt.71, sa.1-4, ss.109-115, 2014 (SCI-Expanded)

Pulsed Nd: YAG laser shock processing effects on mechanical properties of 6061-T6 alloy

Gencalp Irizalp S., SAKLAKOĞLU N., AKMAN E., Demir A.

Optics and Laser Technology , cilt.56, ss.273-277, 2014 (SCI-Expanded)

Near surface modification of aluminum alloy induced by laser shock processing

SAKLAKOĞLU N., Gencalp Irizalp S., AKMAN E., Demir A.

Optics and Laser Technology , cilt.64, ss.235-241, 2014 (SCI-Expanded)

Influence of Ag content on microstructure and intermetallic phases of AlSi12 alloy

Turker A., SAKLAKOĞLU N.

International Journal of Cast Metals Research , cilt.26, sa.3, ss.129-133, 2013 (SCI-Expanded)

Effects of Low-Frequency Mechanical Vibration and Casting Temperatures on Microstructure of Semisolid AlSi8Cu3Fe Alloy

Gencalp S., SAKLAKOĞLU N.

Arabian Journal for Science and Engineering , cilt.37, sa.8, ss.2255-2267, 2012 (SCI-Expanded)

Semisolid microstructure evolution during cooling slope casting under vibration of A380 aluminum alloy

Gencalp S., SAKLAKOĞLU N.

Materials and Manufacturing Processes , cilt.25, sa.9, ss.943-947, 2010 (SCI-Expanded)

Tribological behaviour of plasma immersion ion implanted AISI 304 stainless steel against polymer and ceramic counterfaces

SAKLAKOĞLU N., SAKLAKOĞLU İ. E., Ceyhun V., Aǧaçhan N., Short K., Collins G.

Surface Engineering , cilt.23, sa.4, ss.257-260, 2007 (SCI-Expanded)

Characterization of surface mechanical properties of H13 steel implanted by plasma immersion ion implantation

SAKLAKOĞLU N.

Journal of Materials Processing Technology , cilt.189, sa.1-3, ss.367-373, 2007 (SCI-Expanded)

Sliding wear behaviour of Zr-ion-implanted D3 tool steel

SAKLAKOĞLU N., SAKLAKOĞLU İ. E., Ceyhun V., Monteiro O., Brown I.

Tribology International , cilt.40, sa.5, ss.794-799, 2007 (SCI-Expanded)

The life of WC-Co cutting tools treated by plasma immersion ion implantation

SAKLAKOĞLU İ. E., SAKLAKOĞLU N., Ceyhun V., Short K., Collins G.

International Journal of Machine Tools and Manufacture , cilt.47, sa.3-4, ss.715-719, 2007 (SCI-Expanded)

Characterization of austenitic stainless steel after plasma immersion nitrogen and carbon implantation

SAKLAKOĞLU İ. E., SAKLAKOĞLU N., Short K., Collins G.

Materials and Design , cilt.28, sa.5, ss.1657-1663, 2007 (SCI-Expanded)

Tribological behavior of PIII treated AISI 316 L austenitic stainless steel against UHMWPE counterface

SAKLAKOĞLU N., SAKLAKOĞLU İ. E., Short K., Collins G.

Wear , cilt.261, sa.3-4, ss.264-268, 2006 (SCI-Expanded)

Mechanical properties and microstructural evaluation of AA5013 aluminum alloy treated in the semi-solid state by SIMA process

SAKLAKOĞLU N., SAKLAKOĞLU İ. E., Tanoglu M., Oztas O., Cubukcuoglu O.

Journal of Materials Processing Technology , cilt.148, sa.1, ss.103-107, 2004 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Effect of various cross-sections on the flexural behaviour of composite beams

Yigit E., SAKLAKOĞLU N.

Sakarya University Journal of Science , cilt.27, sa.3, ss.572-579, 2023 (Scopus)

Effect of Fe-rich intermetallics on the microstructure and mechanical properties of thixoformed A380 aluminum alloy

Gencalp Irizalp S., SAKLAKOĞLU N.

Engineering Science and Technology, an International Journal , cilt.17, sa.2, ss.58-62, 2014 (Scopus)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler

440B Martenzitik Paslanmaz Çeliğin İndüksiyon ile Sertleştirilebilirliğinin Araştırılması

EYİCİ G., SAKLAKOĞLU N.

8 th International Students Science Congress, Manisa, Türkiye, 22 Mayıs 2024, (Tam Metin Bildiri)

Ti6Al4V Alaşımının SLE Yöntemiyle Üretiminde Lazerle Yeniden Ergitmenin Parçaların Yoğunluğu ve Yüzey Kalitesine Etkileri

Apaydın C., Ayan K., SAKLAKOĞLU N., İRİZALP S.

8th International Students Science Congress, İzmir, Türkiye, 23 Mayıs 2024, (Tam Metin Bildiri)

Sürtünme Karıştırma Kaynağı ile Birleştirilen AA1050 Malzemenin Çentik Darbe Direncinin İncelenmesi

TÜRKER A., Kayran E., SAKLAKOĞLU N.

International Design and Engineering Symposium, İzmir, Türkiye, 10 - 12 Ekim 2019, (Tam Metin Bildiri)

Metal Enjeksiyon Kalıbı Çekirdeğinde Meydana Gelen Hasar Mekanizmasının İncelenmesi

Koçak E., SAKLAKOĞLU N.

Uluslararası Tasarım ve Mühendislik Sempozyumu – IDES’19, 10 - 12 Ekim 2019, (Tam Metin Bildiri)

Influence of accelerated air cooling on microstructure and mechanical properties on P355NL1 steel

SAKLAKOĞLU N., HOCALAR Ç., SAKLAKOĞLU İ. E., DEMİROK S.

International Conference on Innovations in Natural Science and Engineering, 7 - 10 Eylül 2018, (Tam Metin Bildiri)

SIMULATION BASED OPTIMIZATION OF A HOT FORGING PROCESS- AN EXAMPLE OF PRESSURE VESSEL COMPONENT

HOCALAR Ç., KİLERCİ İ., ÇULHA O., SAKLAKOĞLU N., DEMİROK S.

1. INTERNATIONAL UNIVERSITY INDUSTRY COOPERATION, RD AND INNOVATION CONGRESS, Manisa, Türkiye, 18 - 19 Aralık 2017, ss.76, (Özet Bildiri)

EFFECT OF AUSTENITISATION TEMPERATURE ON MICROSTRUCTURE AND MECHANICALPROPERTIES OF 38MNVS6 MICROALLOYED STEEL

ERÇAYHAN Y., SAKLAKOĞLU N.

INTERNATIONAL CONFERENCE ONENGINEERING TECHNOLOGYAND INNOVATION, SARAY BOSNA, 22 - 26 Mart 2017, (Tam Metin Bildiri)

Microstructural aspects of nickel-based surfacing deposited by gas metal arc welding (GMAW)

SAKLAKOĞLU N., DOĞAN S., İRİZALP S., DEMİROK S., SAKLAKOĞLU İ. E.

International Conference on Engineering and Innovation (ICETI2017), SARAY BOSNA, Bosna-Hersek, 22 - 26 Mart 2017, (Tam Metin Bildiri)

The Effect of Accelerated Air Cooling on Microstructures and Mechanical Properties of Microalloyed Steel

SAKLAKOĞLU N., ERÇAYHAN Y.

INTERNATIONAL CONGRESS onNATURAL and ENGINEERING SCIENCES, 21 - 25 Temmuz 2017, (Özet Bildiri)

Evaluation of Microstructure and Wear Behavior of Fe-Based Hardfacing Layer on the 1.2714 Steel

SAKLAKOĞLU N., İldaş G., İRİZALP S., SAKLAKOĞLU İ. E., Demirok S.

18th International Metallurgy and Materials Congress (IMMC 2016), İstanbul, Türkiye, 29 Eylül - 01 Ekim 2016, (Tam Metin Bildiri)

Alüminyum Alaşımına Lazer Şok İşleme Prosesinin Etkisinin Belirlenmesi

İRİZALP S., SAKLAKOĞLU N., AKMAN E.

14th International Materials Symposium (IMSP’2012), Denizli, Türkiye, 10 - 12 Ekim 2012, (Tam Metin Bildiri)

A380 Alaşımında Yarı Katı Şekillendirmenin Kompozit Yapılara Etkisinin İncelenmesi

İRİZALP S., SAKLAKOĞLU N., Erçayhan Y.

I. Ulusal Ege Kompozit Malzemeler Sempozyumu, İzmir, Türkiye, 17 - 19 Kasım 2011, (Özet Bildiri)

Formation of globular microstructure in A380 aluminum alloy by cooling slope casting

SAKLAKOĞLU N., Gencalp S., KASMAN Ş., SAKLAKOĞLU İ. E.

International Conference on Advances in Materials and Processing Technologies, AMPT 2009, Malezya, 26 - 29 Ekim 2009, cilt.264-265, ss.272-277, (Tam Metin Bildiri)

The effects of cooling slope casting and isothermal treatment on wear behavior of A380 Alloy

SAKLAKOĞLU N., Gencalp S., KASMAN Ş.

International Conference on Advances in Materials and Processing Technologies, AMPT 2009, Malezya, 26 - 29 Ekim 2009, cilt.264-265, ss.42-47, (Tam Metin Bildiri)

Microstructural evolution and mechanical properties of cold-deformed al-5cu alloy samples after isothermal heat treatments

SAKLAKOĞLU N., Gencalp S.

International Conference on Advances in Materials and Processing Technologies, AMPT2010, Paris, Fransa, 24 - 27 Ekim 2010, cilt.1315, ss.92-97, (Tam Metin Bildiri)

Wear Behavior of Thixoformed A380 Alloy by SIMA Process

SAKLAKOĞLU N., BİROL Y., İRİZALP S., Erçayhan Y.

International Conference on Advances in Materials and Processing Technologies (AMPT 2010), Paris, Fransa, 24 - 27 Ekim 2010, (Özet Bildiri)

The globular microstructure formation of A380 aluminum alloy by cooling slope casting

SAKLAKOĞLU N., İRİZALP S., KASMAN Ş., SAKLAKOĞLU İ. E.

The International Conference on Advances in Materials and Processing Technologies (AMPT2009), Kuala-Lumpur, Malezya, 26 - 29 Ekim 2009, (Özet Bildiri)

Döküm yönteminin Etial 160 alüminyum alaşımının mekanik özelliklerine etkisinin belirlenmesi

KASMAN Ş., İRİZALP S., SAKLAKOĞLU N., Uçar Ş.

5. Uluslararası İleri Teknolojiler Sempozyumu (IATS'09), Karabük, Türkiye, 13 - 15 Mayıs 2009, (Özet Bildiri)

Soğutma plakasında döküm sırasında plaka açı ve uzunluğunun mikroyapı gelişimine etkisinin incelenmesi

İRİZALP S., KASMAN Ş., SAKLAKOĞLU N.

5. Uluslararası İleri Teknolojiler Sempozyumu (IATS'09), Karabük, Türkiye, 13 - 15 Mayıs 2009, (Özet Bildiri)

Microstructural evolution of ETIAL 160 aluminium alloy feedstock produced by cooling slope casting

SAKLAKOĞLU N., Birol Y., KASMAN Ş.

Semi-Solid Processing of Alloys and Composites 10 - Selected, peer reviewed papers from the 10th International Conference on Semi-Solid Processing of Alloy and Composites, S2P 2008, Aachen, Almanya, 16 - 18 Eylül 2008, cilt.141-143, ss.575-580, (Tam Metin Bildiri)