Yayınlar & Eserler

Yayın Ağı
Makaleler 17
Tümü (17)
SCI-E, SSCI, AHCI (11)
SCI-E, SSCI, AHCI, ESCI (12)
ESCI (1)
Scopus (12)
TRDizin (5)

1. Investigating fabric interlayer effects on tensile loading limits of adhesively bonded single-lap composite joints

TAŞ H., SOYKÖK İ. F.
Journal of Reinforced Plastics and Composites , cilt.44, sa.23-24, ss.2928-2940, 2025 (SCI-Expanded, Scopus) identifier identifier

2. A numerical study on the lateral torsional buckling behaviour of aluminium/CFRP hybrid I-beam

TAŞ H.
ENGINEERING SCIENCES , cilt.14, sa.4, 2025 (TRDizin)

3. Experimental Study on the Bending Behaviour of GFRP Laminates Repaired with Stainless-Steel Wire Mesh

TAŞ H., Unal H. Y.
POLYMERS , cilt.17, sa.17, 2025 (SCI-Expanded, Scopus) identifier identifier identifier

4. Effects of Stainless Steel Woven Wire Mesh Reinforcement on the Load-Bearing Capacity of Adhesively Bonded Aluminium Alloy Single-Lap Joints

TAŞ H.
Arabian Journal for Science and Engineering , cilt.50, sa.17, ss.14043-14058, 2025 (SCI-Expanded, Scopus) identifier identifier

5. Determinating optimum combination of ageing and manufacturing parameters for laminated composites using response surface methodology

Öztürk R., TAŞ H., Soykok İ. F.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES , cilt.44, sa.5-6, ss.259-279, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

6. Effects of support patches on the mechanical characteristics of adhesively bonded aluminium alloy single lap joints

TAŞ H.
Journal of Adhesion , cilt.101, sa.12, ss.1471-1496, 2025 (SCI-Expanded, Scopus) identifier identifier

7. Investigation of the Defect Effects on the Load-Carrying Capacity of Butt Joints: A Numerical Study

TAŞ H.
Hittite Journal of Science and Engineering , cilt.11, sa.3, 2024 (TRDizin)

8. Effects of natural mica particle fillers on the mechanical properties of glass fiber/epoxy composite plates

SOYKÖK İ. F., TAŞ H.
Journal of the Brazilian Society of Mechanical Sciences and Engineering , cilt.46, sa.1, 2024 (SCI-Expanded, Scopus) identifier identifier

9. A numerical and theoretical investigation into torsional buckling of composite driveshaft incorporating carbon nanotube

TAŞ H.
Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi , cilt.14, sa.4, ss.671-681, 2023 (TRDizin) identifier

10. INVESTIGATION USING FINITE ELEMENT ANALYSIS OF EFFECT TO EARRING OF ANISOTROPY PARAMETERS IN DEEP DRAWING PROCESS

Gök K., TAŞ H., Gök A., Alkan M. A.
International Journal of Modern Manufacturing Technologies , cilt.15, sa.1, ss.80-86, 2023 (Scopus) identifier

11. Investigation of the low velocity puncture resistance of shear thickening fluid impregnated S2 glass fiber fabrics

TAŞ H., SOYKÖK İ. F., Halimi A. J.
PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , cilt.28, sa.4, ss.539-546, 2022 (ESCI, TRDizin) Creative Commons License identifier identifier

12. Puncture resistance of STF impregnated MWCNTs-grafted carbon fabrics

TAŞ H., SOYKÖK İ. F.
Materials Today Communications , cilt.28, 2021 (SCI-Expanded, Scopus) identifier

13. Investigation of the Low Velocity Impact Behaviour of Shear Thickening Fluid Impregnated Kevlar, Hybrid (Kevlar/Carbon) and Carbon Fabrics

TAŞ H., SOYKÖK İ. F.
Fibers and Polymers , cilt.22, sa.9, ss.2626-2634, 2021 (SCI-Expanded, Scopus) identifier

14. Effect of drop weight impact on the torsional-loading behavior of filament wound and prepreg-wrapped composite tubes

SOYKÖK İ. F., TAŞ H., ÖZDEMİR O., Kandas H.
Polymers and Polymer Composites , cilt.29, sa.6, ss.617-628, 2021 (SCI-Expanded, Scopus) identifier

15. Effects of carbon nanotube inclusion into the carbon fiber reinforced laminated composites on flexural stiffness: A numerical and theoretical study

TAŞ H., SOYKÖK İ. F.
Composites Part B: Engineering , cilt.159, ss.44-52, 2019 (SCI-Expanded, Scopus) identifier

16. Evaluation of the failure responses of filament wound and pre-preg wrapped glass fiber/epoxy composite tubes under quasi-static torsional loading

SOYKÖK İ. F., Ozcan A. R., TAŞ H.
Materials Research Express , cilt.6, sa.5, 2019 (SCI-Expanded, Scopus) identifier

17. Tabakalı Hibrit Kompozit Profillerin Doğal Frekanslarının Sonlu Elemanlar Metodu ile Belirlenmesi

TAŞ H., SOYKÖK İ. F.
Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi , cilt.20, sa.60, ss.1045-1056, 2018 (TRDizin) identifier
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 6

1. DESIGN, MANUFACTURING AND CHARACTERIZATION OF ROTATING FURNACES FOR CONTINUOUS PRECOATING OF OXIDE POWDERS WITH HYDROCARBON GASES

AYDIN M., TAŞ H., KADIOĞLU M.
Ist-International Congress on Modern Sciences, Tashkent, Özbekistan, 10 Mayıs 2022, cilt.1, ss.541-555, (Tam Metin Bildiri)

2. INVESTIGATION OF THE BALLISTIC RESISTANCE OF SHEAR THİCKENING FLUID IMPREGNATED FABRICS (KEVLAR, HYBRID AND CARBON)

TAŞ H., SOYKÖK İ. F.
7th INTERNATIONAL ZEUGMA CONFERENCE ON SCIENTIFIC RESEARCHES, Gaziantep, Türkiye, 21 Ocak 2022, cilt.1, ss.193, (Özet Bildiri)

3. Kesme kalınlaşması gösteren sıvıların reolojik davranışlarının araştırılması

TAŞ H., SOYKÖK İ. F.
Zeugma II. Uluslararası Multidisipliner Çalışmalar Kongresi, Gaziantep, Türkiye, 18 - 20 Ocak 2019, (Tam Metin Bildiri)

4. Evaluation of a novel design for improving the mechanicalproperties of carbon and glass fiber reinforced filament woundcomposite tanks exposed to internal pressures

SOYKÖK İ. F., ŞAFAK Ü., TAŞ H.
II International Conference on Engineering Technology and Innovation ( ICETI 2018 ), Budapest, Macaristan, 7 - 11 Mart 2018, (Özet Bildiri)

5. Comparison of Prediction Performance of Data Mining Algorithms and Response Surface Equations

TAŞ H., SOYKÖK İ. F.
II International Conference on Engineering Technology and Innovation ( ICETI 2018 ), Budapest, Macaristan, 7 - 11 Mart 2018, (Özet Bildiri)

6. Bir kanal içi radyal fanın performansının deneysel olarak belirlenmesi

TAŞ H., GÜRSES B. O., ŞENTÜRK U.
19. Ulusal Isı Bilimi ve Tekniği Kongresi, Samsun, Türkiye, 9 - 12 Eylül 2013, ss.164-167, (Tam Metin Bildiri)
Kitaplar 1

1. A Soft Robotic Gripper Material Study: Effects of CNT Mixing Methodologies

İLMAN M. M., TAŞ H.
Design and Control Advances in Robotics, Mellal Mohamed Arezk, Editör, IGI Global Scientific Publishing, ss.60-73, 2022
Metrikler

Yayın

24

Yayın (WoS)

12

Yayın (Scopus)

12

Atıf (WoS)

77

H-İndeks (WoS)

5

Atıf (Scopus)

85

H-İndeks (Scopus)

5

Proje

7

Tez Danışmanlığı

2

Açık Erişim

1
BM Sürdürülebilir Kalkınma Amaçları