Prof. Dr. FATİH SELİMEFENDİGİL

Numerical Heat Transfer, Part B: Fundamentals , cilt.86, sa.7, ss.2006-2029, 2025 (SCI-Expanded)

Thermal behavior of phase change material in open cavities: Effects of opening position and occupancy level

Kiyak B., Oztop H. F., Biswas N., SELİMEFENDİGİL F.

Thermal Science and Engineering Progress , cilt.62, 2025 (SCI-Expanded)

Effects of using double elastic inclined fins on cooling of protruding heated electronic equipment mounted in a bifurcating channel under nano-enhanced magneto forced convection: Computational analysis and optimized configurations

International Journal of Heat and Mass Transfer , cilt.242, 2025 (SCI-Expanded)

Optimization assisted divide–combine approach to model cooling of a PV module equipped with TEG by using a trapezoidal shaped hybrid nano-enhanced cooling channel and performance estimation with generalized neural networks

International Journal of Heat and Mass Transfer , cilt.241, 2025 (SCI-Expanded)

Geometry curvature influence on melting and solidification performance in nano particle added phase change material to storage energy

Kiyak B., Biswas N., Öztop H. F., SELİMEFENDİGİL F.

Journal of Energy Storage , cilt.117, 2025 (SCI-Expanded)

Three-dimensional analysis of turbulent twin-swirling jets onto a heated rectangular prism in a channel

Gur M., Oztop H., Biswas N., SELİMEFENDİGİL F.

International Journal of Numerical Methods for Heat and Fluid Flow , cilt.35, sa.3, ss.1137-1171, 2025 (SCI-Expanded)

Phase transition of multiple encapsulated PCMs in a U-shaped channel under MHD with ternary nanofluid

International Journal of Numerical Methods for Heat and Fluid Flow , cilt.35, sa.3, ss.930-952, 2025 (SCI-Expanded)

Cooling of double PV-TEG combined units by using a T-shaped branching channel equipped with an inclined elastic fin

Energy , cilt.320, 2025 (SCI-Expanded)

Energy harvesting and forced convective heat transfer features of multiple slot jet impingement cooling of partly elastic flat and curved surfaces having double piezo-energy harvesters

Heliyon , cilt.11, sa.8, 2025 (SCI-Expanded)

The physics of phase transition phenomena enhanced by nanoparticles

Yang L., Tian J., Ding Y., Alagumalai A., SELİMEFENDİGİL F., Aghbashlo M., et al.

Applied Physics Reviews , cilt.12, sa.1, 2025 (SCI-Expanded)

Effects of fin shapes and orientations with cyclic heating and cooling on melting and solidification of PCM-filled closed space

Kıyak B., Öztop H. F., Biswas N., Coşanay H., SELİMEFENDİGİL F.

International Journal of Heat and Fluid Flow , cilt.112, 2025 (SCI-Expanded)

Effects of Combined Utilization of Active Cooler/Heater and Blade-Shaped Nanoparticles in Base Fluid for Performance Improvement of Thermoelectric Generator Mounted in Between Vented Cavities

Arabian Journal for Science and Engineering , cilt.50, sa.4, ss.2925-2943, 2025 (SCI-Expanded)

Effects of geometrical configurations on melting and solidification processes in phase change materials

Kiyak B., Oztop H. F., Biswas N., SELİMEFENDİGİL F.

Applied Thermal Engineering , cilt.258, 2025 (SCI-Expanded)

Computational study and optimization of an inclined U-channel cooling system for triple conductive panels under magnetic field

Case Studies in Thermal Engineering , cilt.65, 2025 (SCI-Expanded)

A Novel Cooling System by Surface Corrugation and Nanofluid Utilization for the Performance Improvement of Photovoltaic Module Coupled with Thermoelectric Generator and Efficient Computations by Using Artificial Neural Network-Based Hybrid Scheme

Arabian Journal for Science and Engineering , cilt.49, sa.11, ss.15711-15731, 2024 (SCI-Expanded)

Energy and exergy performance improvement of coupled PV–TEG module by using different shaped nano-enhanced cooling channels

Renewable Energy , cilt.234, 2024 (SCI-Expanded)

Ternary nanofluid cooling of an elastic plate by using double sinusoidal wavy channels under different magnetic fields

SELİMEFENDİGİL F., Hadrich B., Kriaa K., Maatki C., Kolsi L.

Archive of Applied Mechanics , cilt.94, sa.11, ss.3339-3357, 2024 (SCI-Expanded)

Effects of cooler shape and position on solidification of phase change material in a cavity

Öztop H. F., Kiyak B., Biswas N., SELİMEFENDİGİL F., Coşanay H.

Journal of the Taiwan Institute of Chemical Engineers , cilt.163, 2024 (SCI-Expanded)

Effects of corrugation on convective heat transfer and power generation in a wavy walled triangular cavity equipped with inclined elastic fin and piezo-energy harvester assembly

Case Studies in Thermal Engineering , cilt.62, 2024 (SCI-Expanded)

Thermal management and power generation characteristics in a bifurcating channel by using a piezo-embedded inclined elastic fin assembly during turbulent forced convection of ternary nanofluid

Ahmet Çakmak F., SELİMEFENDİGİL F., Öztop H. F.

Thermal Science and Engineering Progress , cilt.55, 2024 (SCI-Expanded)

A review on different Nano-Enhanced techniques for productivity improvement of solar stills

Thermal Science and Engineering Progress , cilt.55, 2024 (SCI-Expanded)

Cooling of a hot elastic plate by using hybrid channel-jet impingement system with ternary nanofluid and efficient computations by using ANN assisted CFD

Engineering Analysis with Boundary Elements , cilt.166, 2024 (SCI-Expanded)

Cooling Performance Improvement for Two Hot Elastic Plates by Using Double Channels With Rotating Cylinders

SELİMEFENDİGİL F., Altammar H., Oztop H. F.

Journal of Thermal Science and Engineering Applications , cilt.16, sa.9, 2024 (SCI-Expanded)

Impacts of using a piezo-mounted elastic fin energy harvester on the power production and heat transfer control in a ventilated cavity during turbulent forced convection

International Communications in Heat and Mass Transfer , cilt.157, 2024 (SCI-Expanded)

Effects of using magnetic field and double jet impingement for cooling of a hot oscillating object

SELİMEFENDİGİL F., Ghachem K., Albalawi H., Alshammari B. M., Labidi T., Kolsi L.

Case Studies in Thermal Engineering , cilt.60, 2024 (SCI-Expanded)

Analysis of Natural Convection and Melting in a Separated Cavity with Nano-enhanced Phase Change Material filled wall

Öztop H. F., Coşanay H., Biswas N., SELİMEFENDİGİL F.

Arabian Journal for Science and Engineering , cilt.49, sa.8, ss.10653-10668, 2024 (SCI-Expanded)

A review study on the direct absorption solar collectors working with nanofluids

Hussain M., Ullah S., Alshammari S., SELİMEFENDİGİL F., Maatki C., Khan S. U., et al.

Journal of Thermal Analysis and Calorimetry , cilt.149, sa.15, ss.7919-7946, 2024 (SCI-Expanded)

Application of ternary nanofluid and rotating cylinders in the cooling system of photovoltaic/thermoelectric generator coupled module and computational cost reduction

Shahsavar A., Naderi M., SELİMEFENDİGİL F.

Applied Thermal Engineering , cilt.250, 2024 (SCI-Expanded)

Exploring the impact of tube rotation on the melting performance of multi-tube latent heat storage systems: A numerical investigation

Journal of Energy Storage , cilt.93, 2024 (SCI-Expanded)

Comparisons of different cooling systems for thermal management of lithium-ion battery packs: Phase change material, nano-enhanced channel cooling and hybrid method

Dilbaz F., SELİMEFENDİGİL F., Öztop H. F.

Journal of Energy Storage , cilt.90, 2024 (SCI-Expanded)

Analysis of melting behavior of layered different phase change materials for a cylinder insert into a channel

Öztop H. F., Akbal Ö., Biswas N., SELİMEFENDİGİL F.

Thermal Science and Engineering Progress , cilt.51, 2024 (SCI-Expanded)

Effects of using sinusoidal porous object (SPO) and perforated porous object (PPO) on the cooling performance of nano-enhanced multiple slot jet impingement for a conductive panel system

SELİMEFENDİGİL F., Benabdallah F., Ghachem K., Albalawi H., Alshammari B. M., Kolsi L.

Propulsion and Power Research , cilt.13, sa.2, ss.166-177, 2024 (SCI-Expanded)

Heat and mass transfer of a circular porous moist object located in a triangular shaped vented cavity 位于三角形通风腔内的圆形多孔潮湿介质的传热和传质

SELİMEFENDİGİL F., Özcan Çoban S., Öztop H. F.

Journal of Central South University , cilt.31, sa.6, ss.1956-1972, 2024 (SCI-Expanded)

A review on nanofluid, phase change material and machine learning applications for thermal management of hydrogen storage in metal hydrides

ŞENOL G., SELİMEFENDİGİL F., Öztop H. F.

International Journal of Hydrogen Energy , cilt.68, ss.1178-1208, 2024 (SCI-Expanded)

Nanofluid cooling of a hot rotating circular cylinder employing cross-flow channel cooling on the upper part and multi-jet impingement cooling on the lower part

SELİMEFENDİGİL F., Larguech S., Ghachem K., Albalawi H., Alshammari B. M., Labidi T., et al.

AIP Advances , cilt.14, sa.5, 2024 (SCI-Expanded)

Three dimensional numerical study of PV module cooling by using thermoelectric effects and nano-enhanced confined multiple slot jet impingement

International Journal of Heat and Mass Transfer , cilt.221, 2024 (SCI-Expanded)

Effects of a conductive T-shaped partition on the phase change dynamics in a channel equipped with multiple encapsulated PCMs under different magnetic fields

SELİMEFENDİGİL F., Ghachem K., Albalawi H., Alshammari B. M., Labidi T., Kolsi L.

Case Studies in Thermal Engineering , cilt.55, 2024 (SCI-Expanded)

Analysis of solidification of phase change material flowing through a channel with backward step: Effects of step curvature

Öztop H. F., Kıyak B., Biswas N., SELİMEFENDİGİL F., Coşanay H.

Thermal Science and Engineering Progress , cilt.49, 2024 (SCI-Expanded)

Conductive panel cooling by using coupled effects of nano-jet impingement, double rotating cylinders and magnetic field under cross-flow

Öztop H. F., Gür M., SELİMEFENDİGİL F., Coşanay H.

International Journal of Numerical Methods for Heat and Fluid Flow , cilt.34, sa.3, ss.1248-1276, 2024 (SCI-Expanded)

Magneto-convection of nanofluid flow over multiple rotating cylinders in a confined space with elastic walls and ventilated ports

SELİMEFENDİGİL F., Ghachem K., Albalawi H., AlShammari B. M., Labidi T., Kolsi L.

Heliyon , cilt.10, sa.3, 2024 (SCI-Expanded)

Impacts of inclined plate on melting time for phase change material filled blocks: Experimental and numerical analysis

Thermal Science and Engineering Progress , cilt.48, 2024 (SCI-Expanded)

Convection and phase change in a lid-driven trapezoidal vented cavity with encapsulated PCM under non-uniform magnetic field by using ternary nanofluid

Thermal Science and Engineering Progress , cilt.48, 2024 (SCI-Expanded)

Coupled effects of corrugation and rotation on the phase transition and thermal process in a vented cavity under MHD convection

Journal of Energy Storage , cilt.77, 2024 (SCI-Expanded)

Effects of a rotating partition on mixed convection of hybrid nanofluid in a lid-driven cavity under different magnetic fields

Physics of Fluids , cilt.36, sa.1, 2024 (SCI-Expanded)

Effects of location of nano-enhanced PCM-packed bed on the process of heat transfer and phase transition in a nonuniform magnetic field

Numerical Heat Transfer; Part A: Applications , 2024 (SCI-Expanded)

Effects of elasticity and waviness of the conductive panel surface on the cooling performance and entropy generation by using nano-enhanced multiple impinging jets

SELİMEFENDİGİL F., Cakmak F. A., Oztop H. F.

Numerical Heat Transfer; Part A: Applications , cilt.85, sa.15, ss.2439-2459, 2024 (SCI-Expanded)

NUMERICAL ANALYSIS FOR THE IMPACTS OF USING NANO-ENHANCED PCM ON THE THERMAL MANAGEMENT OF BATTERY MODULE

Thermal Science , cilt.28, sa.2, ss.1893-1904, 2024 (SCI-Expanded)

Analysis of MHD nanofluid forced convection and phase change process in a PCM mounted corrugated and partly elastic partitioned channel system with area expansion

Omri M., SELİMEFENDİGİL F., Besbes H., Ladhar L., Alshammari B. M., Kolsi L.

Journal of Engineering Research (Kuwait) , 2024 (SCI-Expanded)

Effects of using a finned cylindrical cooler in the nano-enhanced cooling channel on the exergetic performance of a PV/TEG-coupled system

SELİMEFENDİGİL F., Okulu D., Öztop H. F.

Energy Sources, Part A: Recovery, Utilization and Environmental Effects , cilt.46, sa.1, ss.11486-11497, 2024 (SCI-Expanded)

EXPERIMENTAL ANALYSIS OF A SOLAR DESALINATION SYSTEM WITH GRAPHENE NANOPLATELET-EMBEDDED LATENT HEAT THERMAL ENERGY STORAGE UNIT

Şirin C., SELİMEFENDİGİL F.

Heat Transfer Research , cilt.55, sa.3, ss.1-15, 2024 (SCI-Expanded)

Single-channel cooling system design by using perforated porous insert and modeling with POD for double conductive panel

SELİMEFENDİGİL F., Benabdallah F., Ghachem K., Albalawi H., Alshammari B. M., Kolsi L.

Open Physics , cilt.22, sa.1, 2024 (SCI-Expanded)

Numerical analysis of conjugate convection heat transfer in an open cavity with different phase change materials surrounded by plexiglass

Öztop H. F., SELİMEFENDİGİL F., Coşanay H., Abu-Hamdeh N.

Numerical Heat Transfer; Part A: Applications , cilt.85, sa.14, ss.2221-2240, 2024 (SCI-Expanded)

IMPACTS OF USING POROUS CORNER PARTITIONS AND BLADE SHAPED NANOPARTICLES IN BASE FLUID ON THE PERFORMANCE IMPROVEMENT OF THERMOELECTRIC GENERATOR MOUNTED VENTED CAVITIES AND INTERFACE TEMPERATURE ESTIMATION WITH PROPER ORTHOGONAL DECOMPOSITION

SELİMEFENDİGİL F., Öztop H.

Journal of Porous Media , cilt.27, sa.12, ss.79-99, 2024 (SCI-Expanded)

Thermal and phase change process in a branching T-channel under active magnetic field and two rotating inner cylinders: Analysis and predictions by radial basis neural networks

Gür M., Öztop H. F., SELİMEFENDİGİL F.

International Journal of Heat and Mass Transfer , cilt.217, 2023 (SCI-Expanded)

Analysis of solar underfloor heating system assisted with nano enhanced phase change material for nearly zero energy buildings approach

Renewable Energy , cilt.218, 2023 (SCI-Expanded)

Phase change dynamics in a triangular elastic walled vented cavity having phase change material packed bed during nanofluid forced convection 纳米流体强制对流过程中充填相变材料的三角形弹性壁通气腔内的相变动力学

Öztop H. F., Coşanay H., Biswas N., SELİMEFENDİGİL F.

Journal of Central South University , cilt.30, sa.11, ss.3630-3640, 2023 (SCI-Expanded)

Recent Advances in Nanoencapsulated and Nano-Enhanced Phase-Change Materials for Thermal Energy Storage: A Review

Khlissa F., Mhadhbi M., Aich W., Hussein A. K., Alhadri M., SELİMEFENDİGİL F., et al.

Processes , cilt.11, sa.11, 2023 (SCI-Expanded)

Thermal energy storage via waste heat from finned heater by using different phase change materials in a closed space

Journal of Energy Storage , cilt.70, 2023 (SCI-Expanded)

Thermal and phase change process analysis in a porous vented circular cavity under the impacts of inner rotating surface and inclined magnetic field during nanoliquid convection

SELİMEFENDİGİL F., Chouikhi H., Oztop H. F.

Journal of Magnetism and Magnetic Materials , cilt.582, 2023 (SCI-Expanded)

Natural convection and entropy generation of hybrid nanofluid in double annulus separated by a thin rotating partition under magnetic field

Journal of Magnetism and Magnetic Materials , cilt.582, 2023 (SCI-Expanded)

Enhancing the performance of a greenhouse dryer with natural dolomite powder-embedded latent heat thermal energy storage unit and air-to-air heat recovery system

SELİMEFENDİGİL F., Şirin C.

Solar Energy , cilt.262, 2023 (SCI-Expanded)

Thermal and phase change process of nanofluid in a wavy PCM installed triangular elastic walled ventilated enclosure under magnetic field

SELİMEFENDİGİL F., Ghachem K., Albalawi H., Alshammari B. M., Labidi T., Kolsi L.

Case Studies in Thermal Engineering , cilt.49, 2023 (SCI-Expanded)

Optimization of bifurcating channel cooling system for double inclined conductive panel system under inclined magnetic field

SELİMEFENDİGİL F., El-Sinawi A. H., Oztop H. F.

International Journal of Thermal Sciences , cilt.191, 2023 (SCI-Expanded)

Analysis of melting of phase change material inserted a block via impinging turbulent slot jet

Oztop H. F., Gür M., SELİMEFENDİGİL F., Coşanay H.

International Journal of Numerical Methods for Heat and Fluid Flow , cilt.33, sa.10, ss.3467-3491, 2023 (SCI-Expanded)

Multiple slot nano-jet impingement cooling of a sinusoidal hot surface by using active rotating cylinders under magnetic field

SELİMEFENDİGİL F., Ghachem K., Alwadai N., Alshammari B. M., Kolsi L.

Case Studies in Thermal Engineering , cilt.47, 2023 (SCI-Expanded)

Thermal performance and SVM-based regression of natural convection in a 3D cavity filled with nanofluids as two phase mixture under combined effects of magnetic field and inner conductive hollow rotating conic object

SELİMEFENDİGİL F., KOÇYİĞİT Y., Öztop H. F.

Engineering Analysis with Boundary Elements , cilt.152, ss.311-325, 2023 (SCI-Expanded)

Comparative study on different cooling techniques for photovoltaic thermal management: Hollow fins, wavy channel and insertion of porous object with hybrid nanofluids

Applied Thermal Engineering , cilt.228, 2023 (SCI-Expanded)

CFD analysis and optimization of nano-enhanced phase change process in multiple port vented cavity equipped with encapsulated PCM under the combined effects of triple rotating cylinders and inclined magnetic field

SELİMEFENDİGİL F., Oztop H.

Journal of Magnetism and Magnetic Materials , cilt.575, 2023 (SCI-Expanded)

Impacts of using discrete and continuous porous layers on the cooling performance of confined multiple slot jet impingement under partially active magnetic field

International Journal of Numerical Methods for Heat and Fluid Flow , cilt.33, sa.7, ss.2353-2376, 2023 (SCI-Expanded)

Combined Utilization of Cylinder and Different Shaped Alumina Nanoparticles in the Base Fluid for the Effective Cooling System Design of Lithium-Ion Battery Packs

SELİMEFENDİGİL F., Dilbaz F., Öztop H. F.

Energies , cilt.16, sa.9, 2023 (SCI-Expanded)

Nano-jet impingement cooling of a sinusoidal wavy hot surface by using an oriented L-shaped object under magnetic field with two phase mixture formulation

Engineering Analysis with Boundary Elements , cilt.150, ss.423-434, 2023 (SCI-Expanded)

Convective Heat Transfer and Entropy Generation for Nano-Jet Impingement Cooling of a Moving Hot Surface under the Effects of Multiple Rotating Cylinders and Magnetic Field

Kolsi L., SELİMEFENDİGİL F., Larguech S., Ghachem K., Albalawi H., Alshammari B. M., et al.

Mathematics , cilt.11, sa.8, 2023 (SCI-Expanded)

Forced convection of nanofluid in double vented cavity system separated by perforated conductive plate under magnetic field

Engineering Analysis with Boundary Elements , cilt.149, ss.18-26, 2023 (SCI-Expanded)

Multijet impingement heat transfer under the combined effects of encapsulated-PCM and inclined magnetic field during nanoliquid convection

International Journal of Heat and Mass Transfer , cilt.203, 2023 (SCI-Expanded)

Impacts of using helical coils (HCs) on the performance improvements of thermoelectric device mounted channels and modeling by using soft computing techniques

SELİMEFENDİGİL F., Okulu D., Öztop H. F.

Sustainable Energy Technologies and Assessments , cilt.56, 2023 (SCI-Expanded)

Photovoltaic Thermal Management by Combined Utilization of Thermoelectric Generator and Power-Law-Nanofluid-Assisted Cooling Channel

Sustainability (Switzerland) , cilt.15, sa.6, 2023 (SCI-Expanded)

Performance Analysis and Identification of an Indirect Photovoltaic Thermal Dryer with Aluminum Oxide Nano-Embedded Thermal Energy Storage Modification

Şirin C., SELİMEFENDİGİL F., Öztop H. F.

Sustainability (Switzerland) , cilt.15, sa.3, 2023 (SCI-Expanded)

Effects of İnclined Plate in a Channel to Control Melting of PCM in a Body İnserted on the Bottom Wall

Öztop H., Bakır E., SELİMEFENDİGİL F., Gür M., Coşanay H.

Experimental Techniques , cilt.47, sa.1, ss.123-137, 2023 (SCI-Expanded)

Conjugate Heat Transfer Analysis for Cooling of a Conductive Panel by Combined Utilization of Nanoimpinging Jets and Double Rotating Cylinders

Kolsi L., SELİMEFENDİGİL F., Gasmi H., Alshammari B. M.

Nanomaterials , cilt.13, sa.3, 2023 (SCI-Expanded)

Experimental Techniques

SELİMEFENDİGİL F., Khoshvaght-Aliabadi M.

Experimental Techniques , cilt.47, sa.1, ss.5-6, 2023 (SCI-Expanded)

MHD hybrid nanofluid convection and phase change process in an L-shaped vented cavity equipped with an inner rotating cylinder and PCM-packed bed system

Ouri H., SELİMEFENDİGİL F., Bouterra M., Omri M., Alshammari B. M., Kolsi L.

Alexandria Engineering Journal , cilt.63, ss.563-582, 2023 (SCI-Expanded)

CFD Study of MHD and Elastic Wall Effects on the Nanofluid Convection Inside a Ventilated Cavity Including Perforated Porous Object

Kolsi L., SELİMEFENDİGİL F., Omri M., Rmili H., Ayadi B., Maatki C., et al.

Mathematics , cilt.11, sa.3, 2023 (SCI-Expanded)

Utilization of wavy porous layer, magnetic field and hybrid nanofluid with slot jet impingement on the cooling performance of conductive panel

Ouni M., SELİMEFENDİGİL F., Hatem B., Kolsi L., Omri M.

International Journal of Numerical Methods for Heat and Fluid Flow , cilt.33, sa.1, ss.360-384, 2023 (SCI-Expanded)

Combined effects of using multiple porous cylinders and inclined magnetic field on the performance of hybrid nanoliquid forced convection

Öztop H. F., Akbal Ö., SELİMEFENDİGİL F., Abu-Hamdeh N. H.

Journal of Magnetism and Magnetic Materials , cilt.565, 2023 (SCI-Expanded)

Numerical Study of Thermo-Electric Conversion for TEG Mounted Wavy Walled Triangular Vented Cavity Considering Nanofluid with Different-Shaped Nanoparticles

SELİMEFENDİGİL F., Omri M., Aich W., Besbes H., Ben Khedher N., Alshammari B. M., et al.

Mathematics , cilt.11, sa.2, 2023 (SCI-Expanded)

Analysis of the Melting Time of Phase Change Material in a Heat Exchanger with Sinusoidal Inner Duct

Symmetry , cilt.15, sa.1, 2023 (SCI-Expanded)

A Review on Non-Newtonian Nanofluid Applications for Convection in Cavities under Magnetic Field

SELİMEFENDİGİL F., ŞENOL G., Öztop H. F., Abu-Hamdeh N. H.

Symmetry , cilt.15, sa.1, 2023 (SCI-Expanded)

A REVIEW ON COMPUTATIONAL FLUID DYNAMICS SIMULATION METHODS FOR DIFFERENT CONVECTIVE DRYING APPLICATIONS

Coban S. O., SELİMEFENDİGİL F., Oztop H. F., Hepbaşlı A.

Thermal Science , cilt.27, sa.1, ss.825-842, 2023 (SCI-Expanded)

Hybrid Nano-Jet Impingement Cooling of Double Rotating Cylinders Immersed in Porous Medium

SELİMEFENDİGİL F., Hamzaoui M., Aydi A., Alshammari B. M., Kolsi L.

Mathematics , cilt.11, sa.1, 2023 (SCI-Expanded)

Pulsating multiple nano-jet impingement cooling system design by using different nanofluids for photovoltaic (PV) thermal management

Maatoug S., Moulahi A., Bazuhair N., Alqarni S., SELİMEFENDİGİL F., Aich W., et al.

Case Studies in Thermal Engineering , cilt.41, 2023 (SCI-Expanded)

Thermo-hydraulic performance and entropy generation of biologically synthesized silver/water-ethylene glycol nano-fluid flow inside a rifled tube using two-phase mixture model

Shahsavar A., Jafari M., Baniasad Askari I., SELİMEFENDİGİL F.

Energy Sources, Part A: Recovery, Utilization and Environmental Effects , cilt.45, sa.2, ss.4463-4480, 2023 (SCI-Expanded)

Hybrid nanofluid convection and phase change process in an expanded channel under the combined effects of double rotating cylinders and magnetic field

Öztop H. F., SELİMEFENDİGİL F., Coşanay H.

Journal of Molecular Liquids , cilt.368, 2022 (SCI-Expanded)

Analysis of phase change dynamics by using fin in a 3D tall cavity and modeling with artificial neural network

Engineering Analysis with Boundary Elements , cilt.145, ss.34-45, 2022 (SCI-Expanded)

MHD Nanofluid Convection and Phase Change Dynamics in a Multi-Port Vented Cavity Equipped with a Sinusoidal PCM-Packed Bed System

Coşanay H., SELİMEFENDİGİL F., Öztop H. F., SARI A.

Magnetochemistry , cilt.8, sa.12, 2022 (SCI-Expanded)

Experimental Analysis of Melting Behavior of Capric Acid (CA)–Stearic Acid (SA) Eutectic Mixture and its 3D Numerical Solution of Natural Convection in a Cup

Arabian Journal for Science and Engineering , cilt.47, sa.12, ss.15575-15589, 2022 (SCI-Expanded)

Optimization of phase change process in a sinusoidal-wavy conductive walled cylinder with encapsulated-phase change material during magnetohydrodynamic nanofluid convection

Akbal Ö., SELİMEFENDİGİL F., Öztop H. F.

Journal of Energy Storage , cilt.55, 2022 (SCI-Expanded)

Exergy and environmental analysis of an active greenhouse dryer with Al2O3 nano-embedded latent heat thermal storage system: An experimental study

SELİMEFENDİGİL F., Şirin C., Ghachem K., Kolsi L.

Applied Thermal Engineering , cilt.217, 2022 (SCI-Expanded)

Effects of flexible fins on melting process in a phase change material filled circular cavity

Journal of Energy Storage , cilt.55, 2022 (SCI-Expanded)

Cooling system design for photovoltaic thermal management by using multiple porous deflectors and nanofluid

Omri M., SELİMEFENDİGİL F., Smaoui H. T., Kolsi L.

Case Studies in Thermal Engineering , cilt.39, 2022 (SCI-Expanded)

Thermal and Phase Change Process in a Locally Curved Open Channel Equipped with PCM-PB and Heater during Nanofluid Convection under Magnetic Field

Aich W., SELİMEFENDİGİL F., Alqahtani T., Algarni S., Alshehery S., Kolsi L.

Mathematics , cilt.10, sa.21, 2022 (SCI-Expanded)

Hybrid nano-jet impingement cooling of a curved elastic hot surface under the combined effects of non-uniform magnetic field and upper plate inclination

Okulu D., SELİMEFENDİGİL F., Öztop H. F.

Journal of Magnetism and Magnetic Materials , cilt.561, 2022 (SCI-Expanded)

Review on nanofluids and machine learning applications for thermoelectric energy conversion in renewable energy systems

Engineering Analysis with Boundary Elements , cilt.144, ss.221-261, 2022 (SCI-Expanded)

Investigation of phase change dynamics in a T-shaped multiple vented cylindrical cavity during nanofluid convection for PCM-embedded system

Kolsi L., SELİMEFENDİGİL F., Omri M.

International Journal of Numerical Methods for Heat and Fluid Flow , cilt.32, sa.11, ss.3484-3503, 2022 (SCI-Expanded)

Analysis of melting of phase change material block inserted to an open cavity

Öztop H. F., Coşanay H., SELİMEFENDİGİL F., Abu-Hamdeh N.

International Communications in Heat and Mass Transfer , cilt.137, 2022 (SCI-Expanded)

Lithium-ion battery module performance improvements by using nanodiamond-FE3O4 water/ethylene glycol hybrid nanofluid and fins

Dilbaz F., SELİMEFENDİGİL F., Öztop H. F.

Journal of Thermal Analysis and Calorimetry , cilt.147, sa.19, ss.10625-10635, 2022 (SCI-Expanded)

Jet impingement cooling using shear thinning nanofluid under the combined effects of inclined separated partition at the inlet and magnetic field

SELİMEFENDİGİL F., Kolsi L., Ayadi B., Aich W., Alresheedi F., Borjini M. N.

European Physical Journal: Special Topics , cilt.231, sa.13-14, ss.2491-2508, 2022 (SCI-Expanded)

A review on soft computing and nanofluid applications for battery thermal management

Can A., SELİMEFENDİGİL F., Öztop H. F.

Journal of Energy Storage , cilt.53, 2022 (SCI-Expanded)

Numerical analysis for thermal management of data center with phase change material

F. Oztop H., Özgül R., SELİMEFENDİGİL F.

International Journal of Numerical Methods for Heat and Fluid Flow , cilt.32, sa.10, ss.3283-3305, 2022 (SCI-Expanded)

Application and CFD-Based Optimization of a Novel Porous Object for Confined Slot Jet Impingement Cooling Systems under a Magnetic Field

Aich W., SELİMEFENDİGİL F., Ayadi B., Ben Said L., Alshammari B. M., Kolsi L., et al.

Mathematics , cilt.10, sa.15, 2022 (SCI-Expanded)

Optimization assisted CFD for using double porous cylinders on the performance improvement of TEG mounted 3D channels

Sustainable Energy Technologies and Assessments , cilt.52, 2022 (SCI-Expanded)

Coupled Effects of Using Magnetic Field, Rotation and Wavy Porous Layer on the Forced Convection of Hybrid Nanoliquid Flow over 3D-Backward Facing Step

Ghachem K., SELİMEFENDİGİL F., Alshammari B. M., Maatki C., Kolsi L.

Nanomaterials , cilt.12, sa.14, 2022 (SCI-Expanded)

Nanoliquid Jet Impingement Heat Transfer for a Phase Change Material Embedded Radial Heating System

SELİMEFENDİGİL F., Öztop H. F., Afrand M.

Journal of Thermal Science and Engineering Applications , cilt.14, sa.7, 2022 (SCI-Expanded)

Shape effects of TEG mounted ventilated cavities with alumina-water nanofluids on the performance features by using artificial neural networks

Engineering Analysis with Boundary Elements , cilt.140, ss.79-97, 2022 (SCI-Expanded)

Enhancing the performance of a greenhouse drying system by using triple-flow solar air collector with nano-enhanced absorber coating

SELİMEFENDİGİL F., Sirin C., Ghachem K., Kolsi L., Alqahtani T., Algarni S.

Case Studies in Thermal Engineering , cilt.34, 2022 (SCI-Expanded)

Combined effects of bifurcation and magnetic field on the performance of phase change material installed cylinder with small inlet temperature perturbations during nanofluid convection

Coban S. O., SELİMEFENDİGİL F., Oztop H.

International Journal of Heat and Mass Transfer , cilt.188, 2022 (SCI-Expanded)

Impacts of rotating surface and area expansion during nanofluid convection on phase change dynamics for PCM packed bed installed cylinder

Ghachem K., SELİMEFENDİGİL F., Öztop H. F., Alhadri M., Kolsi L., Alshammari N.

Alexandria Engineering Journal , cilt.61, sa.6, ss.4159-4173, 2022 (SCI-Expanded)

Convective drying performance of porous moist objects under turbulent flow conditions: effects of object shape and material

International Journal of Numerical Methods for Heat and Fluid Flow , cilt.32, sa.7, ss.2454-2475, 2022 (SCI-Expanded)

Non-uniform magnetic field effects on the phase transition dynamics for PCM-installed 3D conic cavity having ventilation ports under hybrid nanofluid convection

SELİMEFENDİGİL F., Öztop H. F., Izadi F.

Journal of Building Engineering , cilt.49, 2022 (SCI-Expanded)

Performance analysis of thermoelectric generator mounted chaotic channel by using non-Newtonian nanofluid and modeling with efficient computational methods

SELİMEFENDİGİL F., Öztop H. F., Kolsi L., Omri M.

Alexandria Engineering Journal , cilt.61, sa.5, ss.3527-3549, 2022 (SCI-Expanded)

Effect of simultaneous application of chaotic laminar flow of nanofluid and non-uniform magnetic field on the entropy generation and energetic/exergetic efficiency

Aidaoui L., Lasbet Y., SELİMEFENDİGİL F.

Journal of Thermal Analysis and Calorimetry , cilt.147, sa.10, ss.5865-5882, 2022 (SCI-Expanded)

Performance Optimization of a Thermoelectric Device by Using a Shear Thinning Nanofluid and Rotating Cylinder in a Cavity with Ventilation Ports

Ben Khedher N., SELİMEFENDİGİL F., Kolsi L., Aich W., Said L. B., Boukholda I.

Mathematics , cilt.10, sa.7, 2022 (SCI-Expanded)

Pulsating nanofluid flow in a wavy bifurcating channel under partially active uniform magnetic field effects

Kolsi L., SELİMEFENDİGİL F., Ghachem K., Alqahtani T., Algarni S.

International Communications in Heat and Mass Transfer , cilt.133, 2022 (SCI-Expanded)

Entropy Analysis of the Thermal Convection of Nanosuspension within a Chamber with a Heat-Conducting Solid Fin

Le X. H. K., Oztop H. F., SELİMEFENDİGİL F., Sheremet M. A.

Entropy , cilt.24, sa.4, 2022 (SCI-Expanded)

Experimental investigation of a parabolic greenhouse dryer improved with copper oxide nano-enhanced latent heat thermal energy storage unit

SELİMEFENDİGİL F., Şirin C.

International Journal of Energy Research , cilt.46, sa.3, ss.3647-3662, 2022 (SCI-Expanded)

Comparative study and hybrid modeling approach with POD for convective drying performance of porous moist object with multi-impinging jet and channel flow configurations

International Communications in Heat and Mass Transfer , cilt.132, 2022 (SCI-Expanded)

Thermal management for conjugate heat transfer of curved solid conductive panel coupled with different cooling systems using non-Newtonian power law nanofluid applicable to photovoltaic panel systems

International Journal of Thermal Sciences , cilt.173, 2022 (SCI-Expanded)

Experimental Performance Analysis of a Solar Desalination System Modified with Natural Dolomite Powder Integrated Latent Heat Thermal Storage Unit

Sustainability (Switzerland) , cilt.14, sa.5, 2022 (SCI-Expanded)

Impacts of using an elastic fin on the phase change process under magnetic field during hybrid nanoliquid convection through a PCM-packed bed system

International Journal of Mechanical Sciences , cilt.216, 2022 (SCI-Expanded)

Optimization of convective drying performance of multiple porous moist objects in a 3D channel

International Journal of Thermal Sciences , cilt.172, 2022 (SCI-Expanded)

Thermal management and performance improvement by using coupled effects of magnetic field and phase change material for hybrid nanoliquid convection through a 3D vented cylindrical cavity

International Journal of Heat and Mass Transfer , cilt.183, 2022 (SCI-Expanded)

Multiple Impinging Jet Cooling of a Wavy Surface by Using Double Porous Fins under Non-Uniform Magnetic Field

Kolsi L., SELİMEFENDİGİL F., Ghachem K., Alqahtani T., Algarni S.

Mathematics , cilt.10, sa.4, 2022 (SCI-Expanded)

Experimental analysis of combined utilization of CuO nanoparticles in latent heat storage unit and absorber coating in a single-slope solar desalination system

Coşanay H., F. Oztop H., SELİMEFENDİGİL F.

Solar Energy , cilt.233, ss.278-286, 2022 (SCI-Expanded)

A computational analysis on convective heat transfer for impinging slot nanojets onto a moving hot body

International Journal of Numerical Methods for Heat and Fluid Flow , cilt.32, sa.1, ss.364-386, 2022 (SCI-Expanded)

Two-phase mixture modeling of turbulent forced convective flow of water–silver nanofluid inside a rifled tube: hydrothermal characteristics and irreversibility behavior

Shahsavar A., Jafari M., SELİMEFENDİGİL F.

Journal of Thermal Analysis and Calorimetry , cilt.147, sa.1, ss.957-969, 2022 (SCI-Expanded)

Effects of a rotating tube bundle on the hydrothermal performance for forced convection in a vented cavity with Ag–MgO/water hybrid and CNT–water nanofluids

Journal of Thermal Analysis and Calorimetry , cilt.147, sa.1, ss.939-956, 2022 (SCI-Expanded)

Combined effects of double porous layers and nanofluids on the performance of confined single and multi-jet impingement heat transfer

SELİMEFENDİGİL F., Şirin C.

Chemical Engineering Communications , cilt.209, sa.7, ss.925-937, 2022 (SCI-Expanded)

Energy and exergy analysis of a hybrid photovoltaic/thermal-air collector modified with nano-enhanced latent heat thermal energy storage unit

Journal of Energy Storage , cilt.45, 2022 (SCI-Expanded)

CONVECTIVE DRYING OF DIFFERENT SHAPED POROUS MOIST OBJECTS IN VENTILATED SQUARE AND L-SHAPED CAVITIES

Journal of Porous Media , cilt.25, sa.11, ss.45-70, 2022 (SCI-Expanded)

Improving the performance of an active greenhouse dryer by integrating a solar absorber north wall coated with graphene nanoplatelet-embedded black paint

SELİMEFENDİGİL F., Sirin C., Öztop H. F.

Solar Energy , cilt.231, ss.140-148, 2022 (SCI-Expanded)

NUMERICAL AND EXPERIMENTAL INVESTIGATION OF A DOUBLE-PIPE HEAT EXCHANGER WITH SiO2NANO-ADDITIVES

Heat Transfer Research , cilt.53, sa.1, ss.1-12, 2022 (SCI-Expanded)

CONTROL OF NANOLIQUID THERMAL CONVECTION WITH COMBINED EFFECTS OF ROTATION,MAGNETIC FIELD, AND POROUS OBJECT IN A CYLINDRICAL CAVITY

SELİMEFENDİGİL F., Öztop H. F., Sheremet M. A.

Journal of Porous Media , cilt.25, sa.11, ss.109-131, 2022 (SCI-Expanded)

Control of Magnetohydrodynamic Mixed Convection and Entropy Generation in a Porous Cavity by Using Double Rotating Cylinders and Curved Partition

Hassen W., SELİMEFENDİGİL F., Ben Khedher N., Kolsi L., Borjini M. N., Alresheedi F.

ACS Omega , cilt.6, sa.51, ss.35607-35618, 2021 (SCI-Expanded)

Effects of magnetic field, binary particle loading and rotational conic surface on phase change process in a PCM filled cylinder

Ghachem K., SELİMEFENDİGİL F., Öztop H. F., Almeshaal M., Alhadri M., Kolsi L.

Case Studies in Thermal Engineering , cilt.28, 2021 (SCI-Expanded)

Thermal characterization of coolant maxwell type nanofluid flowing in parabolic trough solar collector (PTSC) used inside solar powered ship application

Jamshed W., Şirin C., SELİMEFENDİGİL F., Shamshuddin M., Altowairqi Y., Eid M. R.

Coatings , cilt.11, sa.12, 2021 (SCI-Expanded)

Combined effects of sequential velocity and variable magnetic field on the phase change process in a 3d cylinder having a conic-shaped pcm-packed bed system

Kolsi L., SELİMEFENDİGİL F., Omri M., Ladhar L.

Mathematics , cilt.9, sa.23, 2021 (SCI-Expanded)

Forced convection of non–newtonian nanofluid flow over a backward facing step with simultaneous effects of using double rotating cylinders and inclined magnetic field

Kolsi L., SELİMEFENDİGİL F., Said L. B., Mesloub A., Alresheedi F.

Mathematics , cilt.9, sa.23, 2021 (SCI-Expanded)

Jet impingement cooling of a rotating hot circular cylinder with hybrid nanofluid under multiple magnetic field effects

Ayadi B., SELİMEFENDİGİL F., Alresheedi F., Kolsi L., Aich W., Said L. B.

Mathematics , cilt.9, sa.21, 2021 (SCI-Expanded)

Effect of different heat transfer fluids on discharging performance of phase change material included cylindrical container during forced convection 强制对流条件下不同传热流体对含相变材料柱形容器放热性能的影响

SELİMEFENDİGİL F., Çoğan M., Öztop H. F.

Journal of Central South University , cilt.28, sa.11, ss.3521-3533, 2021 (SCI-Expanded)

Combined effects of local curvature and elasticity of an isothermal wall for jet impingement cooling under magnetic field effects 磁场作用下射流冲击冷却等温壁面局部曲率和弹性的联合效应

Journal of Central South University , cilt.28, sa.11, ss.3534-3544, 2021 (SCI-Expanded)

Effects of surface rotation on the phase change process in a 3d complex-shaped cylindrical cavity with ventilation ports and installed pcm packed bed system during hybrid nanofluid convection

Kolsi L., SELİMEFENDİGİL F., Omri M.

Mathematics , cilt.9, sa.20, 2021 (SCI-Expanded)

Analysis of hybrid nanofluid and surface corrugation in the laminar convective flow through an encapsulated PCM filled vertical cylinder and POD-based modeling

SELİMEFENDİGİL F., Öztop H. F., Doranehgard M. H., Karimi N.

International Journal of Heat and Mass Transfer , cilt.178, 2021 (SCI-Expanded)

Phase change dynamics in a cylinder containing hybrid nanofluid and phase change material subjected to a rotating inner disk

Journal of Energy Storage , cilt.42, 2021 (SCI-Expanded)

Optimization of convective heat transfer performance for fluid flow over a facing step by using an elliptic porous object

Case Studies in Thermal Engineering , cilt.27, 2021 (SCI-Expanded)

Effects of flow separation and shape factor of nanoparticles in heat transfer fluid for convection thorough phase change material (PCM) installed cylinder for energy technology applications

Journal of Energy Storage , cilt.41, 2021 (SCI-Expanded)

Thermal management of nanoliquid forced convective flow over heated blocks in channel by using double elliptic porous objects

Propulsion and Power Research , cilt.10, sa.3, ss.262-276, 2021 (SCI-Expanded)

Unsteady conjugate heat transfer with combined effects of MHD and moving conductive elliptic object in CNT-water nanofluid with ventilation ports

Çoban S. Ö., SELİMEFENDİGİL F., Öztop H. F.

International Journal of Numerical Methods for Heat and Fluid Flow , cilt.31, sa.8, ss.2484-2508, 2021 (SCI-Expanded)

Impacts of double rotating cylinders on the forced convection of hybrid nanofluid in a bifurcating channel with partly porous layers

Kolsi L., SELİMEFENDİGİL F., Öztop H. F., Hassen W., Aich W.

Case Studies in Thermal Engineering , cilt.26, 2021 (SCI-Expanded)

3D numerical study of heat and mass transfer of moving porous moist objects

Thermal Science and Engineering Progress , cilt.24, 2021 (SCI-Expanded)

Impacts of elasticity and porosity of the channels on the performance features of thermoelectric module mounted system and efficient computations with multi-proper orthogonal decomposition approach

SELİMEFENDİGİL F., Öztop H. F., Doranehgard M. H.

Journal of the Taiwan Institute of Chemical Engineers , cilt.124, ss.359-368, 2021 (SCI-Expanded)

Effects of using a porous disk on the dynamic features of phase change process with PCM integrated circular pipe during nano-liquid forced convection in discharging operation mode

Journal of the Taiwan Institute of Chemical Engineers , cilt.124, ss.381-390, 2021 (SCI-Expanded)

Thermoelectric generation in bifurcating channels and efficient modeling by using hybrid CFD and artificial neural networks

Renewable Energy , cilt.172, ss.582-598, 2021 (SCI-Expanded)

An efficient method for optimizing the unsteady heat and mass transport features for convective drying of two porous moist objects in a channel

SELİMEFENDİGİL F., Oztop H. F., Khodadadi J. M.

International Journal of Mechanical Sciences , cilt.200, 2021 (SCI-Expanded)

Forced convection laminar pulsating flow in a 90-deg bifurcation

Journal of Thermal Science and Engineering Applications , cilt.13, sa.3, 2021 (SCI-Expanded)

Jet impingement heat transfer of confined single and double jets with non-newtonian power law nanofluid under the inclined magnetic field effects for a partly curved heated wall

SELİMEFENDİGİL F., Çoban S. Ö., Öztop H. F.

Sustainability (Switzerland) , cilt.13, sa.9, 2021 (SCI-Expanded)

Numerical modeling of turbulent behavior of nanomaterial exergy loss and flow through a circular channel

Shafee A., Sheikholeslami M., Jafaryar M., SELİMEFENDİGİL F., Bhatti M., Babazadeh H.

Journal of Thermal Analysis and Calorimetry , cilt.144, sa.3, ss.973-981, 2021 (SCI-Expanded)

Investigation of time dependent heat and mass transportation for drying of 3D porous moist objects in convective conditions

International Journal of Thermal Sciences , cilt.162, 2021 (SCI-Expanded)

Performance of TEG integrated channel with area expansion by using advanced passive techniques

International Journal of Mechanical Sciences , cilt.194, 2021 (SCI-Expanded)

Thermoelectric generation from vented cavities with a rotating conic object and highly conductive CNT nanofluids for renewable energy systems

International Communications in Heat and Mass Transfer , cilt.122, 2021 (SCI-Expanded)

Thermal management and modeling of forced convection and entropy generation in a vented cavity by simultaneous use of a curved porous layer and magnetic field

Entropy , cilt.23, sa.2, ss.1-18, 2021 (SCI-Expanded)

Numerical analysis of heat and mass transfer of a moving porous moist object in a two dimensional channel

International Communications in Heat and Mass Transfer , cilt.121, 2021 (SCI-Expanded)

Modeling and identification of combined effects of pulsating inlet temperature and use of hybrid nanofluid on the forced convection in phase change material filled cylinder

Journal of the Taiwan Institute of Chemical Engineers , cilt.119, ss.90-107, 2021 (SCI-Expanded)

Three dimensional unsteady heat and mass transport from six porous moist objects in a channel under laminar forced convection

Applied Thermal Engineering , cilt.183, 2021 (SCI-Expanded)

Performance assessment of a thermoelectric module by using rotating circular cylinders and nanofluids in the channel flow for renewable energy applications

SELİMEFENDİGİL F., Oztop H. F., Sheremet M. A.

Journal of Cleaner Production , cilt.279, 2021 (SCI-Expanded)

Thermoelectric generation with impinging nano-jets

Energies , cilt.14, sa.2, 2021 (SCI-Expanded)

Impacts of rotating surface and oriented magnetic field on mixed convection and melting behavior of CNT-water nanouid in a horizontal annulus

International Communications in Heat and Mass Transfer , cilt.120, 2021 (SCI-Expanded)

EXERGETIC PERFORMANCE OF VAPOR-COMPRESSION REFRIGERATION SYSTEM WITH TiO2 NANOADDITIVE IN THE COMPRESSOR OIL

Thermal Science , cilt.25, sa.1 Part B, ss.637-642, 2021 (SCI-Expanded)

MHD mixed convection of Ag–MgO/water nanofluid in a triangular shape partitioned lid-driven square cavity involving a porous compound

Journal of Thermal Analysis and Calorimetry , cilt.143, sa.2, ss.1467-1484, 2021 (SCI-Expanded)

Impact of a rotating cone on forced convection of Ag–MgO/water hybrid nanofluid in a 3D multiple vented T-shaped cavity considering magnetic field effects

Çavdar P. S., Solmaz B., SELİMEFENDİGİL F., YURDDAŞ A.

Journal of Thermal Analysis and Calorimetry , cilt.143, sa.2, ss.1485-1501, 2021 (SCI-Expanded)

NUMERICAL ANALYSIS OF PULSATING FORCED CONVECTION IN A BACKWARD-FACING STEP FLOW SUBJECTED TO NANOFLUIDS

Environmental Engineering and Management Journal , cilt.20, sa.12, ss.1797-1809, 2021 (SCI-Expanded)

Numerical analysis for performance enhancement of thermoelectric generator modules by using CNT–water and hybrid Ag/MgO–water nanofluids

SELİMEFENDİGİL F., Okulu D., MAMUR H.

Journal of Thermal Analysis and Calorimetry , cilt.143, sa.2, ss.1611-1621, 2021 (SCI-Expanded)

The potential benefits of surface corrugation and hybrid nanofluids in channel flow on the performance enhancement of a thermo-electric module in energy systems

Energy , cilt.213, 2020 (SCI-Expanded)

Identification of pulsating flow effects with CNT nanoparticles on the performance enhancements of thermoelectric generator (TEG) module in renewable energy applications

Renewable Energy , cilt.162, ss.1076-1086, 2020 (SCI-Expanded)

Impacts of magnetic field and hybrid nanoparticles in the heat transfer fluid on the thermal performance of phase change material installed energy storage system and predictive modeling with artificial neural networks

Journal of Energy Storage , cilt.32, 2020 (SCI-Expanded)

Hydro-thermal performance of CNT nanofluid in double backward facing step with rotating tube bundle under magnetic field

International Journal of Mechanical Sciences , cilt.185, 2020 (SCI-Expanded)

Energy storage analysis for discharging of nanoparticle enhanced phase change material within a triplex-tube thermal storage

Zhang X., Sheikholeslami M., Yan W., Shafee A., SELİMEFENDİGİL F., Babazadeh H.

Journal of Energy Storage , cilt.31, 2020 (SCI-Expanded)

Nanojet impingement cooling of an isothermal surface in a partially porous medium under the impact of an inclined magnetic field

SELİMEFENDİGİL F., Özcan Çoban S., Öztop H. F.

Journal of Thermal Analysis and Calorimetry , cilt.141, sa.5, ss.1875-1888, 2020 (SCI-Expanded)

Convective drying of a moist porous object under the effects of a rotating cylinder in a channel

Journal of Thermal Analysis and Calorimetry , cilt.141, sa.5, ss.1569-1590, 2020 (SCI-Expanded)

Effects of local curvature and magnetic field on forced convection in a layered partly porous channel with area expansion

Aidaoui L., Lasbet Y., SELİMEFENDİGİL F.

International Journal of Mechanical Sciences , cilt.179, 2020 (SCI-Expanded)

Improvement of transfer phenomena rates in open chaotic flow of nanofluid under the effect of magnetic field: Application of a combined method

International Journal of Mechanical Sciences , cilt.179, 2020 (SCI-Expanded)

Impacts of conductive inner L-shaped obstacle and elastic bottom wall on MHD forced convection of a nanofluid in vented cavity

Journal of Thermal Analysis and Calorimetry , cilt.141, sa.1, ss.465-482, 2020 (SCI-Expanded)

Combined effects of double rotating cones and magnetic field on the mixed convection of nanofluid in a porous 3D U-bend

Bayrak F., Oztop H. F., SELİMEFENDİGİL F.

International Communications in Heat and Mass Transfer , cilt.116, 2020 (SCI-Expanded)

Phase change process of nanoparticle enhanced PCM in a heat storage including unsteady conduction

Shafee A., Sheikholeslami M., Wang P., SELİMEFENDİGİL F., Babazadeh H.

Journal of Molecular Liquids , cilt.309, 2020 (SCI-Expanded)

Solidification of PCM with nano powders inside a heat exchanger

Hajizadeh M. R., SELİMEFENDİGİL F., Muhammad T., Ramzan M., Babazadeh H., Li Z.

Journal of Molecular Liquids , cilt.306, 2020 (SCI-Expanded)

Experimental study for the application of different cooling techniques in photovoltaic (PV) panels

Energy Conversion and Management , cilt.212, 2020 (SCI-Expanded)

MHD conjugate natural convection in a porous cavity involving a curved conductive partition and estimations by using Long Short-Term Memory Networks

SELİMEFENDİGİL F., Akbulut Y., Sengur A., Oztop H. F.

Journal of Thermal Analysis and Calorimetry , cilt.140, sa.3, ss.1457-1468, 2020 (SCI-Expanded)

Natural convection and melting of NEPCM in a corrugated cavity under the effect of magnetic field

Journal of Thermal Analysis and Calorimetry , cilt.140, sa.3, ss.1427-1442, 2020 (SCI-Expanded)

Role of magnetic field on forced convection of nanofluid in a branching channel

International Journal of Numerical Methods for Heat and Fluid Flow , cilt.30, sa.4, ss.1755-1772, 2020 (SCI-Expanded)

Cooling of an isothermal surface having a cavity component by using CuO-water nano-jet

International Journal of Numerical Methods for Heat and Fluid Flow , cilt.30, sa.4, ss.2169-2191, 2020 (SCI-Expanded)

MHD mixed convection of nanofluid in a three-dimensional vented cavity with surface corrugation and inner rotating cylinder

International Journal of Numerical Methods for Heat and Fluid Flow , cilt.30, sa.4, ss.1637-1660, 2020 (SCI-Expanded)

Mixed convection in a PCM filled cavity under the influence of a rotating cylinder

Solar Energy , cilt.200, ss.61-75, 2020 (SCI-Expanded)

Mass Transfer Characteristics of MHD Casson Fluid Flow past Stretching/Shrinking Sheet

Mahabaleshwar U., Rekha M., Vinay Kumar P., SELİMEFENDİGİL F., Sakanaka P., Lorenzini G., et al.

Journal of Engineering Thermophysics , cilt.29, sa.2, ss.285-302, 2020 (SCI-Expanded)

Magnetohydrodynamics forced convection of nanofluid in multi-layered U-shaped vented cavity with a porous region considering wall corrugation effects

Chamkha A. J., SELİMEFENDİGİL F., Oztop H. F.

International Communications in Heat and Mass Transfer , cilt.113, 2020 (SCI-Expanded)

Effects of a rotating cone on the mixed convection in a double lid-driven 3D porous trapezoidal nanofluid filled cavity under the impact of magnetic field

Nanomaterials , cilt.10, sa.3, 2020 (SCI-Expanded)

Control of natural convection in a CNT-water nanofluid filled 3D cavity by using an inner T-shaped obstacle and thermoelectric cooler

International Journal of Mechanical Sciences , cilt.169, 2020 (SCI-Expanded)

Effects of conductive curved partition and magnetic field on natural convection and entropy generation in an inclined cavity filled with nanofluid

Physica A: Statistical Mechanics and its Applications , cilt.540, 2020 (SCI-Expanded)

Hydrothermal analysis of nanoparticles transportation through a porous compound cavity utilizing two temperature model and radiation heat transfer under the effects of magnetic field

Li Z., SELİMEFENDİGİL F., Sheikholeslami M., Shafee A., Alghamdi M.

Microsystem Technologies , cilt.26, sa.2, ss.333-344, 2020 (SCI-Expanded)

Al2O3-Water Nanofluid Jet Impingement Cooling With Magnetic Field

SELİMEFENDİGİL F., Oztop H. F., Mahian O.

Heat Transfer Engineering , cilt.41, sa.1, ss.50-64, 2020 (SCI-Expanded)

Effects of a partially conductive partition in MHD conjugate convection and entropy generation for a horizontal annulus

Journal of Thermal Analysis and Calorimetry , cilt.139, sa.2, ss.1537-1551, 2020 (SCI-Expanded)

Pulsating flow of CNT–water nanofluid mixed convection in a vented trapezoidal cavity with an inner conductive T-shaped object and magnetic field effects

Chamkha A. J., SELİMEFENDİGİL F., Oztop H. F.

Energies , cilt.13, sa.4, 2020 (SCI-Expanded)

Impact of local elasticity and inner rotating circular cylinder on the magneto-hydrodynamics forced convection and entropy generation of nanofluid in a U-shaped vented cavity

SELİMEFENDİGİL F., Öztop H. F., Sheikholeslami M.

Mathematical Methods in the Applied Sciences , 2020 (SCI-Expanded)

Forced convection in a branching channel with partly elastic walls and inner L-shaped conductive obstacle under the influence of magnetic field

SELİMEFENDİGİL F., Öztop H. F., Özgul R.

International Journal of Heat and Mass Transfer , cilt.144, 2019 (SCI-Expanded)

Turbulent forced convection of nanofluid in an elliptic cross-sectional pipe

International Communications in Heat and Mass Transfer , cilt.109, 2019 (SCI-Expanded)

Mixed convection and entropy generation of nanofluid flow in a vented cavity under the influence of inclined magnetic field

Microsystem Technologies , cilt.25, sa.12, ss.4427-4438, 2019 (SCI-Expanded)

Mixed Convection of Pulsating Ferrofluid Flow Over a Backward-Facing Step

Iranian Journal of Science and Technology - Transactions of Mechanical Engineering , cilt.43, sa.4, ss.593-612, 2019 (SCI-Expanded)

MHD mixed convection of nanofluid in a flexible walled inclined lid-driven L-shaped cavity under the effect of internal heat generation

Physica A: Statistical Mechanics and its Applications , cilt.534, 2019 (SCI-Expanded)

MHD mixed convection of nanofluid in a cubic cavity with a conductive partition for various nanoparticle shapes

International Journal of Numerical Methods for Heat and Fluid Flow , cilt.29, sa.10, ss.3584-3610, 2019 (SCI-Expanded)

MHD mixed convection of nanofluid due to an inner rotating cylinder in a 3D enclosure with a phase change material

Bayrak F., Oztop H. F., SELİMEFENDİGİL F.

International Journal of Numerical Methods for Heat and Fluid Flow , cilt.29, sa.10, ss.3559-3583, 2019 (SCI-Expanded)

Fluid-structure interaction analysis of entropy generation and mixed convection inside a cavity with flexible right wall and heated rotating cylinder

Alsabery A., SELİMEFENDİGİL F., Hashim I., Chamkha A., Ghalambaz M.

International Journal of Heat and Mass Transfer , cilt.140, ss.331-345, 2019 (SCI-Expanded)

Effects of different fin parameters on temperature and efficiency for cooling of photovoltaic panels under natural convection

Solar Energy , cilt.188, ss.484-494, 2019 (SCI-Expanded)

Conjugate mixed convection of nanofluid in a cubic enclosure separated with a conductive plate and having an inner rotating cylinder

International Journal of Heat and Mass Transfer , cilt.139, ss.1000-1017, 2019 (SCI-Expanded)

Effects of an inner stationary cylinder having an elastic rod-like extension on the mixed convection of CNT-water nanofluid in a three dimensional vented cavity

International Journal of Heat and Mass Transfer , cilt.137, ss.650-668, 2019 (SCI-Expanded)

MHD Pulsating forced convection of nanofluid over parallel plates with blocks in a channel

Dogonchi A., SELİMEFENDİGİL F., Ganji D.

International Journal of Mechanical Sciences , cilt.157-158, ss.726-740, 2019 (SCI-Expanded)

Magneto-hydrodynamic natural convection of CuO-water nanofluid in complex shaped enclosure considering various nanoparticle shapes

International Journal of Numerical Methods for Heat and Fluid Flow , cilt.29, sa.5, ss.1663-1679, 2019 (SCI-Expanded)

Electrical conductivity effect on MHD mixed convection of nanofluid flow over a backward-facing step 导电性对纳米磁流体后向混合对流的影响

SELİMEFENDİGİL F., Özcan Çoban S., Öztop H. F.

Journal of Central South University , cilt.26, sa.5, ss.1133-1145, 2019 (SCI-Expanded)

Fluid-solid interaction of elastic-step type corrugation effects on the mixed convection of nanofluid in a vented cavity with magnetic field

SELİMEFENDİGİL F., Oztop H. F., Sheremet M. A., Abu-Hamdeh N.

International Journal of Mechanical Sciences , cilt.152, ss.185-197, 2019 (SCI-Expanded)

Forced convection of Fe 3 O 4 -water nanofluid in a bifurcating channel under the effect of variable magnetic field

Energies , cilt.12, sa.4, 2019 (SCI-Expanded)

Corrugated conductive partition effects on MHD free convection of CNT-water nanofluid in a cavity

International Journal of Heat and Mass Transfer , cilt.129, ss.265-277, 2019 (SCI-Expanded)

Natural convection in a CuO–water nanofluid filled cavity under the effect of an inclined magnetic field and phase change material (PCM) attached to its vertical wall

Journal of Thermal Analysis and Calorimetry , cilt.135, sa.2, ss.1577-1594, 2019 (SCI-Expanded)

Analysis of mixed convection and entropy generation of nanofluid filled triangular enclosure with a flexible sidewall under the influence of a rotating cylinder

Journal of Thermal Analysis and Calorimetry , cilt.135, sa.2, ss.911-923, 2019 (SCI-Expanded)

MHD mixed convection in a nanofluid filled vertical lid-driven cavity having a flexible fin attached to its upper wall

Journal of Thermal Analysis and Calorimetry , cilt.135, sa.1, ss.325-340, 2019 (SCI-Expanded)

Magnetohydrodynamics mixed convection in a power law nanofluid-filled triangular cavity with an opening using Tiwari and Das’ nanofluid model

SELİMEFENDİGİL F., Oztop H. F., Abu-Hamdeh N. H.

Journal of Thermal Analysis and Calorimetry , cilt.135, sa.1, ss.419-436, 2019 (SCI-Expanded)

Mixed convection due to a rotating cylinder in a 3D corrugated cavity filled with single walled CNT-water nanofluid

Journal of Thermal Analysis and Calorimetry , cilt.135, sa.1, ss.341-355, 2019 (SCI-Expanded)

Numerical analysis and ANFIS modeling for mixed convection of CNT-water nanofluid filled branching channel with an annulus and a rotating inner surface at the junction

Chamkha A. J., SELİMEFENDİGİL F., Oztop H. F.

International Journal of Heat and Mass Transfer , cilt.127, ss.583-599, 2018 (SCI-Expanded)

MHD mixed convection and entropy generation in a lid-driven triangular cavity for various electrical conductivity models

Entropy , cilt.20, sa.12, 2018 (SCI-Expanded)

Numerical analysis for thermal performance of a photovoltaic thermal solar collector with SiO2-water nanofluid

Applied Sciences (Switzerland) , cilt.8, sa.11, 2018 (SCI-Expanded)

Forced convection of pulsating nanofluid flow over a backward facing step with various particle shapes

Energies , cilt.11, sa.11, 2018 (SCI-Expanded)

MHD free convection and entropy generation in a corrugated cavity filled with a porous medium saturated with nanofluids

Entropy , cilt.20, sa.11, 2018 (SCI-Expanded)

Magnetic field effects on the forced convection of CuO-water nanofluid flow in a channel with circular cylinders and thermal predictions using ANFIS

SELİMEFENDİGİL F., Bayrak F., Oztop H. F.

International Journal of Mechanical Sciences , cilt.146-147, ss.9-24, 2018 (SCI-Expanded)

Experimental analysis and dynamic modeling of a photovoltaic module with porous fins

Renewable Energy , cilt.125, ss.193-205, 2018 (SCI-Expanded)

Laminar convective nanofluid flow over a backward-facing step with an elastic bottom wall

Journal of Thermal Science and Engineering Applications , cilt.10, sa.4, 2018 (SCI-Expanded)

Role of magnetic field and surface corrugation on natural convection in a nanofluid filled 3D trapezoidal cavity

International Communications in Heat and Mass Transfer , cilt.95, ss.182-196, 2018 (SCI-Expanded)

Analysis and predictive modeling of nanofluid-jet impingement cooling of an isothermal surface under the influence of a rotating cylinder

International Journal of Heat and Mass Transfer , cilt.121, ss.233-245, 2018 (SCI-Expanded)

Cooling of a partially elastic isothermal surface by nanofluids jet impingement

Journal of Heat Transfer , cilt.140, sa.4, 2018 (SCI-Expanded)

Modeling and optimization of MHD mixed convection in a lid-driven trapezoidal cavity filled with alumina–water nanofluid: Effects of electrical conductivity models

International Journal of Mechanical Sciences , cilt.136, ss.264-278, 2018 (SCI-Expanded)

Pulsating hybrid nanofluids double slot jets impingement onto an isothermal wall

Heat Transfer Research , cilt.49, sa.2, ss.173-188, 2018 (SCI-Expanded)

Mixed convection of nanofluids in a three dimensional cavity with two adiabatic inner rotating cylinders

International Journal of Heat and Mass Transfer , cilt.117, ss.331-343, 2018 (SCI-Expanded)

Natural convection in a trapezoidal cavity with an inner conductive object of different shapes and filled with nanofluids of different nanoparticle shapes

Iranian Journal of Science and Technology - Transactions of Mechanical Engineering , cilt.42, sa.2, ss.169-184, 2018 (SCI-Expanded)

Numerical and optimization study ofmixed convection due to a rotating cylinder in a porous cavity

Journal of Porous Media , cilt.21, sa.11, ss.1085-1096, 2018 (SCI-Expanded)

Jet impingement cooling and optimization study for a partly curved isothermal surface with CuO-water nanofluid

International Communications in Heat and Mass Transfer , cilt.89, ss.211-218, 2017 (SCI-Expanded)

Analysis of mixed convection of nanofluid in a 3D lid-driven trapezoidal cavity with flexible side surfaces and inner cylinder

International Communications in Heat and Mass Transfer , cilt.87, ss.40-51, 2017 (SCI-Expanded)

Effects of nanoparticle shape on slot-jet impingement cooling of a corrugated surface with nanofluids

SELİMEFENDİGİL F., Ismael M. A., Chamkha A. J.

Journal of Thermal Science and Engineering Applications , cilt.9, sa.2, 2017 (SCI-Expanded)

Mixed convection in superposed nanofluid and porous layers in square enclosure with inner rotating cylinder

International Journal of Mechanical Sciences , cilt.124-125, ss.95-108, 2017 (SCI-Expanded)

Mixed convection in a vertically layered fluid-porous medium enclosure with two inner rotating cylinders

Ismael M. A., SELİMEFENDİGİL F., Chamkha A. J.

Journal of Porous Media , cilt.20, sa.6, ss.491-511, 2017 (SCI-Expanded)

Conjugate natural convection in a nanofluid filled partitioned horizontal annulus formed by two isothermal cylinder surfaces under magnetic field

International Journal of Heat and Mass Transfer , cilt.108, ss.156-171, 2017 (SCI-Expanded)

Fluid–structure-magnetic field interaction in a nanofluid filled lid-driven cavity with flexible side wall

European Journal of Mechanics, B/Fluids , cilt.61, ss.77-85, 2017 (SCI-Expanded)

Mixed convection in a partially heated triangular cavity filled with nanofluid having a partially flexible wall and internal heat generation

Journal of the Taiwan Institute of Chemical Engineers , cilt.70, ss.168-178, 2017 (SCI-Expanded)

Forced convection and thermal predictions of pulsating nanofluid flow over a backward facing step with a corrugated bottom wall

International Journal of Heat and Mass Transfer , cilt.110, ss.231-247, 2017 (SCI-Expanded)

Numerical Study of Natural Convection in a Ferrofluid-Filled Corrugated Cavity with Internal Heat Generation

Journal of Heat Transfer , cilt.138, sa.12, 2016 (SCI-Expanded)

Analysis of MHD mixed convection in a flexible walled and nanofluids filled lid-driven cavity with volumetric heat generation

International Journal of Mechanical Sciences , cilt.118, ss.113-124, 2016 (SCI-Expanded)

Natural convection in a flexible sided triangular cavity with internal heat generation under the effect of inclined magnetic field

Journal of Magnetism and Magnetic Materials , cilt.417, ss.327-337, 2016 (SCI-Expanded)

Modeling and Prediction of Effects of Time-Periodic Heating Zone on Mixed Convection in a Lid-Driven Cavity Filled with Fluid-Saturated Porous Media

Arabian Journal for Science and Engineering , cilt.41, sa.11, ss.4701-4718, 2016 (SCI-Expanded)

Numerical study of forced convection of nanofluid flow over a backward facing step with a corrugated bottom wall in the presence of different shaped obstacles

Heat Transfer Engineering , cilt.37, sa.15, ss.1280-1292, 2016 (SCI-Expanded)

MHD mixed convection and entropy generation of power law fluids in a cavity with a partial heater under the effect of a rotating cylinder

SELİMEFENDİGİL F., Öztop H.

International Journal of Heat and Mass Transfer , cilt.98, ss.40-51, 2016 (SCI-Expanded)

Mixed convection of nanofluid filled cavity with oscillating lid under the influence of an inclined magnetic field

Journal of the Taiwan Institute of Chemical Engineers , cilt.63, ss.202-215, 2016 (SCI-Expanded)

Magnetohydrodynamics mixed convection in a lid-driven cavity having a corrugated bottom wall and filled with a non-newtonian power-law fluid under the influence of an inclined magnetic field

Journal of Thermal Science and Engineering Applications , cilt.8, sa.2, 2016 (SCI-Expanded)

MHD mixed convection and entropy generation of nanofluid filled lid driven cavity under the influence of inclined magnetic fields imposed to its upper and lower diagonal triangular domains

Journal of Magnetism and Magnetic Materials , cilt.406, ss.266-281, 2016 (SCI-Expanded)

Conjugate natural convection in a cavity with a conductive partition and filled with different nanofluids on different sides of the partition

Chamkha A. J., SELİMEFENDİGİL F., Ismael M. A.

Journal of Molecular Liquids , cilt.216, ss.67-77, 2016 (SCI-Expanded)

Mixed convection in a partially layered porous cavity with an inner rotating cylinder

Numerical Heat Transfer; Part A: Applications , cilt.69, sa.6, ss.659-675, 2016 (SCI-Expanded)

Mixed convection due to rotating cylinder in an internally heated and flexible walled cavity filled with SiO2-water nanofluids: Effect of nanoparticle shape

SELİMEFENDİGİL F., Öztop H. F., Al-Salem K. S.

International Communications in Heat and Mass Transfer , cilt.71, ss.9-19, 2016 (SCI-Expanded)

Control of natural convection heat transfer in ferrofluid filled trapezoidal cavities with a magnetic dipole source

Progress in Computational Fluid Dynamics , cilt.16, sa.6, ss.397-406, 2016 (SCI-Expanded)

Numerical analysis of mixed convection in pulsating flow for a horizontal channel with a cavity heated from below

Thermal Science , cilt.20, sa.1, ss.35-44, 2016 (SCI-Expanded)

Turbulent forced convection over a backward-facing step with a partition located on the upper wall

Heat Transfer Research , cilt.47, sa.6, ss.519-528, 2016 (SCI-Expanded)

Natural convection and entropy generation in nanofluid filled entrapped trapezoidal cavities under the influence of magnetic field

Entropy , cilt.18, sa.2, 2016 (SCI-Expanded)

Mixed convection in a two-sided elastic walled and SiO2 nanofluid filled cavity with internal heat generation: Effects of inner rotating cylinder and nanoparticle's shape

Journal of Molecular Liquids , cilt.212, ss.509-516, 2015 (SCI-Expanded)

Influence of inclination angle of magnetic field on mixed convection of nanofluid flow over a backward facing step and entropy generation

Advanced Powder Technology , cilt.26, sa.6, ss.1663-1675, 2015 (SCI-Expanded)

Natural convection and entropy generation of nanofluid filled cavity having different shaped obstacles under the influence of magnetic field and internal heat generation

Journal of the Taiwan Institute of Chemical Engineers , cilt.56, ss.42-56, 2015 (SCI-Expanded)

Effects of phase shift on the heat transfer characteristics in pulsating mixed convection flow in a multiple vented cavity

Applied Mathematical Modelling , cilt.39, sa.13, ss.3666-3677, 2015 (SCI-Expanded)

Numerical Study and POD-Based Prediction of Natural Convection in a Ferrofluids-Filled Triangular Cavity with Generalized Neural Networks

Numerical Heat Transfer; Part A: Applications , cilt.67, sa.10, ss.1136-1161, 2015 (SCI-Expanded)

Numerical investigation and recurrence plot analysis of pulsating magnetohydrodynamic mixed convection over a backward facing step

Nonlinear Analysis: Modelling and Control , cilt.20, sa.3, ss.428-446, 2015 (SCI-Expanded)

Numerical investigation and reduced order model of mixed convection at a backward facing step with a rotating cylinder subjected to nanofluid

Computers and Fluids , cilt.109, ss.27, 2015 (SCI-Expanded)

Soft computing methods for thermo-acoustic simulation

Numerical Heat Transfer; Part A: Applications , cilt.66, sa.3, ss.271-288, 2014 (SCI-Expanded)

Numerical study and identification of cooling of heated blocks in pulsating channel flow with a rotating cylinder

International Journal of Thermal Sciences , cilt.79, ss.132-145, 2014 (SCI-Expanded)

Effect of a rotating cylinder in forced convection of ferrofluid over a backward facing step

International Journal of Heat and Mass Transfer , cilt.71, ss.142-148, 2014 (SCI-Expanded)

Numerical investigation and dynamical analysis of mixed convection in a vented cavity with pulsating flow

Computers and Fluids , cilt.91, ss.57-67, 2014 (SCI-Expanded)

Estimation of the mixed convection heat transfer of a rotating cylinder in a vented cavity subjected to nanofluid by using generalized neural networks

SELİMEFENDİGİL F., Öztop H. F., Al-Salem K.

Numerical Heat Transfer; Part A: Applications , cilt.65, sa.2, ss.165-185, 2014 (SCI-Expanded)

Natural convection of ferrofluids in partially heated square enclosures

Journal of Magnetism and Magnetic Materials , cilt.372, ss.122-133, 2014 (SCI-Expanded)

MHD mixed convection of nanofluid filled partially heated triangular enclosure with a rotating adiabatic cylinder

Journal of the Taiwan Institute of Chemical Engineers , cilt.45, sa.5, ss.2150-2162, 2014 (SCI-Expanded)

Pulsating nanofluids jet impingement cooling of a heated horizontal surface

SELİMEFENDİGİL F., Polifke W.

International Journal of Heat and Mass Transfer , cilt.69, ss.54-65, 2014 (SCI-Expanded)

Nonlinear, proper-orthogonal-decomposition-based model of forced convection heat transfer in pulsating flow

AIAA Journal , cilt.52, sa.1, ss.131-145, 2014 (SCI-Expanded)

POD-based reduced order model of a thermoacoustic heat engine

European Journal of Mechanics, B/Fluids , cilt.48, ss.135-142, 2014 (SCI-Expanded)

Numerical study of MHD mixed convection in a nanofluid filled lid driven square enclosure with a rotating cylinder

International Journal of Heat and Mass Transfer , cilt.78, ss.741-754, 2014 (SCI-Expanded)

Effects of an adiabatic inclined fin on the mixed convection heat transfer in a square cavity

Progress in Computational Fluid Dynamics , cilt.14, sa.4, ss.268-275, 2014 (SCI-Expanded)

Forced convection of ferrofluids in a vented cavity with a rotating cylinder

International Journal of Thermal Sciences , cilt.86, ss.258-275, 2014 (SCI-Expanded)

Control of laminar pulsating flow and heat transfer in backward-facing step by using a square obstacle

Journal of Heat Transfer , cilt.136, sa.8, 2014 (SCI-Expanded)

Effects of an adiabatic fin on the mixed convection heat transfer in a square cavity with two ventilation ports

Thermal Science , cilt.18, sa.2, ss.377-389, 2014 (SCI-Expanded)

Numerical analysis of laminar pulsating flow at a backward facing step with an upper wall mounted adiabatic thin fin

Computers and Fluids , cilt.88, ss.93-107, 2013 (SCI-Expanded)

Numerical analysis and identification of mixed convection in pulsating flow in a square cavity with two ventilation ports in the presence of a heating block

Journal of the Brazilian Society of Mechanical Sciences and Engineering , cilt.35, sa.3, ss.265-273, 2013 (SCI-Expanded)

Effect of rectangular and triangular thin adiabatic fins on mixed convection in a square cavity with two ventilation ports

Heat Transfer Research , cilt.44, sa.7, ss.621-643, 2013 (SCI-Expanded)

Identification of forced convection in pulsating flow at a backward facing step with a stationary cylinder subjected to nanofluid

International Communications in Heat and Mass Transfer , cilt.45, ss.111-121, 2013 (SCI-Expanded)

Numerical analysis and pod based interpolation of mixed convection heat transfer in horizontal channel with cavity heated from below

Engineering Applications of Computational Fluid Mechanics , cilt.7, sa.2, ss.261-271, 2013 (SCI-Expanded)

Fuzzy-based estimation of mixed convection heat transfer in a square cavity in the presence of an adiabatic inclined fin

SELİMEFENDİGİL F., YURDDAŞ A.

International Communications in Heat and Mass Transfer , cilt.39, sa.10, ss.1639-1646, 2012 (SCI-Expanded)

Numerical analysis of mixed convection heat transfer in pulsating flow for a horizontal channel with a cavity heated from vertical side and below

Heat Transfer Research , cilt.43, sa.6, ss.509-525, 2012 (SCI-Expanded)

Numerical investigation and pod-based interpolation of natural convection cooling of two heating blocks in a square cavity

UĞURLUBİLEK N., SERT Z., SELİMEFENDİGİL F., Öztop H. F.

Arabian Journal for Science and Engineering , cilt.39, sa.3, ss.2235-2250, 2012 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Optimization of Conductive Partitions on the Mixed Convection in a Vented Cavity

Heat Transfer , cilt.54, sa.2, ss.1530-1542, 2025 (ESCI)

Effects of using phase change material and non-Newtonian power law nanofluid on different sides of a double pipe heat exchanger for phase change dynamics and energy performance improvements

Energy Storage , cilt.4, sa.1, 2022 (ESCI)

Mixed Convection In A Single-Walled Carbon Nanotube-Water Nanofluid Filled Partially Heated Triangular Lid-Driven Cavity Having An Elastic Bottom Wall

Journal of Thermal Engineering , cilt.6, sa.6, ss.379-387, 2020 (ESCI)

Magneto-hydrohdynamic free convection of nanofluids in a flexible sided trapezoidal cavity

Computational Thermal Sciences , cilt.12, sa.2, ss.115-132, 2020 (ESCI)

Mixed convection in a lid-driven cavity filled with single and multiple-walled carbon nanotubes nanofluid having an inner elliptic obstacle

SELİMEFENDİGİL F., Öztop H.

Propulsion and Power Research , cilt.8, sa.2, ss.128-137, 2019 (Scopus)

Performance predictions of air-cooled condensers having circular and elliptic cross-sections with artificial neural networks

Journal of Thermal Engineering , cilt.5, sa.3, 2019 (Scopus)

Experimental investigation of nano compressor oil effect on the cooling performance of a vapor-compression refrigeration system

SELİMEFENDİGİL F., Bingölbali T.

Journal of Thermal Engineering , cilt.5, sa.1, ss.100-104, 2019 (Scopus)

Mixed convection of nanofluid over a backward facing step under the effects of a triangular obstacle and inclined magnetic field

SELİMEFENDİGİL F., Oztop H.

Computational Thermal Sciences , cilt.10, sa.6, ss.521-543, 2018 (Scopus)

Ferrofluid convection in a lid-driven cavity

Defect and Diffusion Forum , cilt.388, ss.407-419, 2018 (Scopus)

Mixed convection and entropy generation of a nanofluid filled cavity with a corner partition and flexible wall

Oztop H. F., SELİMEFENDİGİL F., Abu-Nada E., Al-Salem K.

International Journal of Fluid Mechanics Research , cilt.45, sa.3, ss.237-253, 2018 (Scopus)

Recent developments of computational methods on natural convection in curvilinear shaped enclosures

Journal of Thermal Engineering , cilt.2, sa.2, ss.693-698, 2016 (Scopus)

Natural convection of a hybrid nanofluid-filled triangular annulus with an opening

SELİMEFENDİGİL F., Chamhka A. J.

Computational Thermal Sciences , cilt.8, sa.6, ss.555-566, 2016 (Scopus)

Mixed convection of ferrofluids in a lid driven cavity with two rotating cylinders

BAŞARAN A., SELİMEFENDİGİL F.

Engineering Science and Technology, an International Journal , cilt.18, sa.3, ss.439-451, 2015 (Scopus)

Numerical study of heat transfer due to twinjets impingement onto an isothermal moving plate

Mathematical and Computational Applications , cilt.18, sa.3, ss.340-350, 2013 (Scopus)

Numerical investigation of impinging jets with nanofluids on a moving plate

ERSAYIN E., SELİMEFENDİGİL F.

Mathematical and Computational Applications , cilt.18, sa.3, ss.428-437, 2013 (Scopus)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler

HEAT AND MASS TRANSPORTATION OF DIFFERENT SHAPED POROUS MOIST OBJECTS IN A CHANNEL

7 th International Congress “Engineering, Environment and Materials in Process Industry“, Bosna-Hersek, 17 Mart 2021, (Tam Metin Bildiri)

EFFECTS OF A L-SHAPED BAFFLE ON HEAT TRANSFER AND TRANSFER OF DIFFERENT SHAPED POROUS MOIST OBJECTS IN A CHANNEL

7 th International Congress “Engineering, Environment and Materials in Process Industry“, Bosna-Hersek, 17 Mart 2021, (Tam Metin Bildiri)

Mixed Convection Of Al2O3-Water Mhd Nanofluid Flow Over An Inclined Backward-Facing Step

9 th GLOBAL CONFERENCE ON GLOBAL WARMING GCGW 2021, Hırvatistan, 01 Ağustos 2021, (Tam Metin Bildiri)

CONVECTİVE DRYİNG OF CİRCULAR SHAPED MOIST OBJECTS İN A RECTANGULAR CHANNEL, A NUMERİCAL STUDY

15th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Güney Afrika, 26 Temmuz 2021, (Tam Metin Bildiri)

Heat Transfer And Evaporation Of Different Shaped Porous Moist Objects In A Channel Including A L-Shaped Baffle

9 th GLOBAL CONFERENCE ON GLOBAL WARMING GCGW 2021, Hırvatistan, 1 - 04 Ağustos 2021, (Tam Metin Bildiri)

HOT AIR DRYING OF SPHERICAL MOIST OBJECTS IN A 3D RECTANGULAR CHANNEL

TUBA World Conference on Energy Science and Technology, Türkiye, 08 Ağustos 2021, (Tam Metin Bildiri)

3D NUMERICAL STUDY OF HEAT AND MASS TRANSFER OF A MOVING POROUS BLOCK

15th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Güney Afrika, 26 Temmuz 2021, (Tam Metin Bildiri)

Computer simulation of thermo-acoustic interaction

International Conference on Technology and Science (Techno-Science 2019), 14 - 16 Kasım 2019, (Tam Metin Bildiri)

Control of forced convection of nanofluid in a cavity with inlet and outlet ports by using an adiabatic obstacle and magnetic field effects

International Conference on Technology and Science (Techno-Science 2019), 14 - 16 Kasım 2019, (Tam Metin Bildiri)

MİXED CONVECTION of Al2O3-WATER NANOFLUID FLOW OVER AN INCLINED BACKWARD-FACING STEP

INES 2019, Alanya, Turkey, 17 - 21 Nisan 2019, (Tam Metin Bildiri)

MHD MİXED CONVECTION of Al2O3-WATER NANOFLUID FLOW OVER AN INCLINED BACKWARD-FACING STEP

INES 2019- Alanya, Turkey, 17 - 21 Nisan 2019, (Tam Metin Bildiri)

MHD Nanofluid In A Vented Cavity With An Inner Rotating Cylinder

4th International Conference on Engineering Technology and Applied Sciences, 24 - 28 Nisan 2019, (Tam Metin Bildiri)

Effects Of Stack Corrugation On The Thermo-Acoustic Performance

4th International Conference on Engineering Technology and Applied Sciences, 24 - 28 Nisan 2019, (Tam Metin Bildiri)

NUMERICAL STUDY OF CNT- WATER NANOFLUID CONVECTION IN AN Öztop ELLIPTIC PIPE

BAYRAK F., ÖZTOP H. F., SELİMEFENDİGİL F.

INVENT 2019, İstanbul, Turkey, 26 - 28 Nisan 2019, (Tam Metin Bildiri)

COMPARISON OF I-V CURVES OF PHOTOVOLTAIC PANELS BY USING PASSIVE COOLING METHOD

INVENT 2019, İstanbul, Turkey, 26 - 28 Nisan 2019, (Tam Metin Bildiri)

EFFECT OF ROTATION ON THE MELTING OF PCM IN A HORIZONTAL ANNULUS

SELİMEFENDİGİL F., Ataman A. C.

International Congress on Engineering and Life Science (2019), 11 - 14 Nisan 2019, (Tam Metin Bildiri)

DESIGN OF THE TUBULAR HEAT EXCHANGER OF A COGENERATION SYSTEM BURNING HEN MANURE

SELİMEFENDİGİL F., Kenar S.

International Congress on Engineering and Life Science (2019), 11 - 14 Nisan 2019, (Tam Metin Bildiri)

MHD natural convection of nanofluid for an inclined cavity with an inner conductive hollow cylinder

BAYRAK F., ÖZTOP H. F., SELİMEFENDİGİL F.

4th Internatonal Medterranean SCIENCE AND ENGINEERING CONGRESS, 25 - 27 Nisan 2019, (Tam Metin Bildiri)

Increasing the efficiencies of PV module via aluminium foam fins

Solar Conference Exhibition - Solar TR, Türkiye, 29 - 30 Kasım 2018, (Tam Metin Bildiri)

Mixed convection of nanofluid in a vented cavity with magnetic field

1st Int. Conf. Advances in Mechanical and Mechatronics Eng., 8 - 09 Kasım 2018, (Tam Metin Bildiri)

Shape Factor of Nanofluid on the ThermalPerformance of a Double Pipe HeatExchanger

IV INTERNATIONAL CONFERENCE ON ENGINEERING AND NATURAL SCIENCES (ICENS) 2018, 2 - 06 Mayıs 2018, (Tam Metin Bildiri)

Numerical Study Of Natural Convection In A Phase Change Material Filled Corrugated Cavity Under The Effect Of Magnetic Field

SELİMEFENDİGİL F., Çoğan M.

14th INTERNATIONAL CONFERENCE ON ENERGY STORAGE. 25-28 APRIL 2018, 25 - 28 Nisan 2018, (Tam Metin Bildiri)

Jet Impingiment Cooling of a Hot Surface with a Facing Stepusing Hybrid Nanofluids

INTERNATIONAL CONGRESS ON ENGINEERING AND LIFE SCIENCE (ICELIS-2018), 26 - 29 Nisan 2018, (Tam Metin Bildiri)

Numerical Simulation Of Thermoacoustic InA Rijke Tube And Application Of NonlinearAnalysis Tools

SELİMEFENDİGİL F., Gündüz C.

IV INTERNATIONAL CONFERENCE ON ENGINEERING AND NATURAL SCIENCES (ICENS) -2018, 2 - 06 Mayıs 2018, (Tam Metin Bildiri)

Numerical Study of a Thermoacoustic Refrigerator

INTERNATIONAL CONGRESS ON ENGINEERING AND LIFE SCIENCE (ICELIS -2018), 26 - 29 Nisan 2018, (Tam Metin Bildiri)

Numerical study of natural convection in a phase change material filled corrugated caviy under the effect of magnetic field

14th Int. Conf. en. Storage, 25 - 28 Nisan 2018, (Tam Metin Bildiri)

Shape factor of nanofluid on the thermal performance of double pipe heat exchanger

SELİMEFENDİGİL F., ÖZTOP H. F., BAYRAK F.

4th Int. Conf. Eng. Natural Sci., 2 - 06 Mayıs 2018, (Tam Metin Bildiri)

Numerical computational analysis of heat transfer in a photovoltaic panel with phase change materials

14th Int. Con. Energy Storage, 25 - 28 Nisan 2018, (Tam Metin Bildiri)

Effects of Elliptical condenser on the performance of a vapor compression refrigeration system

II. Int. Conf. on Eng. Tech. Innovation, 7 - 11 Mart 2018, (Tam Metin Bildiri)

Experimental analysis for the thermal performance of a double pipe heat exchanger with SiO2-water Nanofluid

II. Int. Conf. Eng. Tech. Innovation, 7 - 11 Mart 2018, (Tam Metin Bildiri)

Mixed convection in a single-walled carbon nanotube-water nanofluid filled partially heated triangular lid-driven cavity having an elastic bottom wall

INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, 19 - 21 Aralık 2017

NUMERICAL STUDY OF NATURAL CONVECTION AND ENTROPY GENERATION IN AN OPEN ENCLOSURE WITH PARTITIONS

2nd International Energy Engineering Conference, 12 - 13 Ekim 2017, (Tam Metin Bildiri)

MHD MIXED CONVECTION IN A LID-DRIVEN TRIANGULAR CAVITY FOR VARIOUS ELECTRICAL CONDUCTIVITY MODELS

The Second International Conference on Computational Mathematics and Engineering Sciences (CMES2017), 20 - 22 Mayıs 2017, (Tam Metin Bildiri)

MHD mixed convection of nanofluid flow over a backward-facing step: effects of electrical conductivity models

INTERNATIONAL CONFERENCE ON ADVANCES AND INNOVATIONS IN ENGINEERING ICAIE 2017, 10 - 12 Mayıs 2017, (Tam Metin Bildiri)

Numerical simulation of mixed convection of nanofluid flow over a backward-facing step

INTERNATIONAL CONFERENCE ON ADVANCES AND INNOVATIONS IN ENGINEERING ICAIE 2017, 10 - 12 Mayıs 2017, (Tam Metin Bildiri)

PERFORMANCE PREDICTIONS OF AIR-COOLED CONDENSERS HAVING CIRCULAR AND ELLIPTIC CROSS-SECTIONS WITH ARTIFICIAL NEURAL NETWORKS

BAYRAK F., SELİMEFENDİGİL F., ÖZTOP H. F.

INTERNATIONAL CONFERENCE ON ENERGY AND THERMAL ENGINEERING:ISTANBUL 2017, 25 - 28 Nisan 2017, (Tam Metin Bildiri)

AN EXPERIMENTAL ANALYSIS OF HYBRID PHOTOVOLTAIC-THERMOELECTRIC (PV/TE) SYSTEM

INTERNATIONAL CONFERENCE ON ENERGY AND THERMAL ENGINEERING:ISTANBUL 2017, 25 - 28 Nisan 2017, (Tam Metin Bildiri)

Dairesel ve eliptik kesite sahip hava soğutmalı kondenserlerdekonveksiyonun sayısal analizi

Evsen O., SELİMEFENDİGİL F.

1st International Mediterranean Science and Engineering Congress (IMSEC 2016), 26 - 28 Ekim 2016, (Tam Metin Bildiri)

Kapalı Tip Soğutma Kulesinde Kapasite Arttırımı İçin DeneyselÇalışma

Şengil B. E., SELİMEFENDİGİL F.

1st International Mediterranean Science and Engineering Congress (IMSEC 2016), 26 - 28 Ekim 2016, (Tam Metin Bildiri)

Effects of nanoparticle shape effect on natural convection in acorner partitioned square cavity

SELİMEFENDİGİL F., İnada A. A.

1st International MediterraneanSCIENCE AND ENGINEERING CONGRESS, 26 - 28 Ekim 2016, (Tam Metin Bildiri)

MIXED CONVECTION OFFERROFLUIDS IN A PARTIALLYHEATED LID DRIVEN CAVITY