Optimization assisted divide–combine approach to model cooling of a PV module equipped with TEG by using a trapezoidal shaped hybrid nano-enhanced cooling channel and performance estimation with generalized neural networks

SELİMEFENDİGİL F., Oztop H. F.

International Journal of Heat and Mass Transfer, cilt.241, 2025 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 241
  • Basım Tarihi: 2025
  • Doi Numarası: 10.1016/j.ijheatmasstransfer.2025.126757
  • Dergi Adı: International Journal of Heat and Mass Transfer
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Academic Search Premier, Aerospace Database, Applied Science & Technology Source, Chimica, Communication Abstracts, Compendex, Computer & Applied Sciences, INSPEC, Metadex, zbMATH, Civil Engineering Abstracts
  • Anahtar Kelimeler: PV-TEG unit, Trapezoidal wavy, Cooling channel, Optimization, Computational fluid dynamics, Generalized neural networks
  • Manisa Celal Bayar Üniversitesi Adresli: Evet

Özet

Innovative cooling strategies and efficient thermal management techniques are needed to increase the efficiency of photovoltaic (PV) modules. In the current work, a novel cooling channel method and computational approach is utilized for thermal management of PV module combined with thermoelectric generator (TEG) unit. The method uses an optimization assisted divide–combine computational approach while a trapezoidal wavy cooling channel is utilized. Hybrid nanofluid is used in the cooling channel. Simulations for cooling channel and PV-TEG unit are conducted by using finite element method while COBYLA algorithm is considered for optimization of trapezoidal wavy channel. It is shown that the corrugation amplitude has the largest effect on a trapezoidal wavy channel's cooling effectiveness, while the inclination angle has the least effect. The range of average Nu improvements by adjusting the trapezoidal wavy channel's amplitude, wave number, and inclination are obtained as 36%–42%, 13.5%−15%, and 2.5%–3%. The average PV-cell temperature decreases by approximately 2.7oC to 3.4oC when the cooling channel is connected to the PV-TEG unit. It also decreases by approximately 1oC to 1.3oC when the wave number is changed. The optimum corrugation height (b/H) and inclination (θ) for the best cooling performance are found as (b/H, θ)=(0.5, 36) when using 3 waves and (b/H, θ)=(0.5, 13.16) when using 11 waves. The PV-cell temperature drops with optimal channel configurations with wave numbers of 3 and 11 are obtained as 4.3oC and 6oC, respectively, in comparison to the reference cooling channel (flat channel employing only pure fluid). While the PV-TEG unit is coupled with parametric simulation of the cooling channel, generalized neural network models are used to successfully estimate the PV-cell temperature and TEG power. More complex channel assemblies and consideration of multiple PV-TEG combined units can be developed using the proposed optimization-assisted divide–combine methodology.