Yayınlar & Eserler

Yayın Ağı
SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Recycling waste polyethylene foam into fired clay bricks: A sustainable solution for lightweight and thermally efficient building materials

Yavaş A., Kalkan Ş. O., SÜTÇÜ M., Gündüz L.
Construction and Building Materials , cilt.473, 2025 (SCI-Expanded) identifier identifier

Phase change material incorporated paper pulp sludge/gypsum composite reinforced by slag and fly ash for energy efficient buildings: Solar thermal regulation, embody energy, sustainability index and cost analysis

KÜÇÜKDOĞAN ÖZTÜRK N., SÜTÇÜ M., ÖZTÜRK S., Yaprak H., Memis S., Gencel O., et al.
Energy and Buildings , cilt.325, 2024 (SCI-Expanded) identifier identifier

Preparation and performance evaluation of waste tuff-modified bricks for sustainable built environment: Effect of firing temperature and molding pressure

SÜTÇÜ M., Faisal M. S., Danish A., Erdogmus E., Gencel O., Ozbakkaloglu T.
Construction and Building Materials , cilt.420, 2024 (SCI-Expanded) identifier identifier

Visible light-induced self-cleaning ZnO coated-clay roofing tiles: The role of coating concentration on structural and photocatalytic properties

Yavaş A., Güneş F., EROL M., SÜTÇÜ M., ÖZDEMİR E. T.
Surfaces and Interfaces , cilt.46, 2024 (SCI-Expanded) identifier identifier

Performance evaluation of phosphor-based luminescent bricks using different coating methods

Gencel O., Danish A., Yilmaz M., Erdogmus E., SÜTÇÜ M., Sadak F., et al.
Renewable and Sustainable Energy Reviews , cilt.191, 2024 (SCI-Expanded) identifier

Developing Wallpaper/Dodecyl alcohol composite phase change materials as new kind of wall covering elements for building interior thermoregulation

Gencel O., Ustaoglu A., SARI A., HEKİMOĞLU G., SÜTÇÜ M., Tozluoglu A., et al.
Thermal Science and Engineering Progress , cilt.46, 2023 (SCI-Expanded) identifier identifier

Recycling of dolomite powder in clay bricks: Effects on characteristics and gas release

Kizinievič O., Gencel O., Kizinievič V., SÜTÇÜ M., Skamat J.
Construction and Building Materials , cilt.404, 2023 (SCI-Expanded) identifier identifier

Effect of molding pressure and firing temperature on the properties of ceramics from natural zeolite

Erdogmus E., SÜTÇÜ M., Hossain S., Bayram M., SARI A., Gencel O., et al.
Construction and Building Materials , cilt.402, 2023 (SCI-Expanded) identifier identifier

Enhancing thermal efficiency and durability of sintered clay bricks through incorporation of polymeric waste materials

Erdogmus E., SÜTÇÜ M., Gencel O., Kazmi S. M. S., Munir M. J., Velasco P. M., et al.
Journal of Cleaner Production , cilt.420, 2023 (SCI-Expanded) identifier identifier

Assessing technological properties and environmental impact of fired bricks made by partially adding bottom ash from an industrial approach

Muñoz P., Letelier V., Muñoz L., Gencel O., SÜTÇÜ M., Vasic M.
Construction and Building Materials , cilt.396, 2023 (SCI-Expanded) identifier identifier

Green 3-step synthesis of bioactive wollastonite from industrial wastes: effects of sintering temperature, sintering time and milling time

Güler S., Yavaş A., Pulat G., Özcan Ş., Karaman O., SÜTÇÜ M.
Journal of the Australian Ceramic Society , cilt.59, sa.3, ss.605-620, 2023 (SCI-Expanded) identifier

Self-cleaning and photocatalytic properties of eco-friendly clay-based facing bricks from industrial and natural wastes

Yavaş A., Atan E., SÜTÇÜ M.
Environmental Science and Pollution Research , cilt.30, sa.32, ss.78152-78167, 2023 (SCI-Expanded) identifier identifier identifier

Synergic effect of recycled paper sludge and expanded perlite on the engineering properties of porous clay bricks: A new mathematical modelling approach

SÜTÇÜ M., ÖZTÜRK S., Gencel O.
Construction and Building Materials , cilt.370, 2023 (SCI-Expanded) identifier identifier

Basalt fiber reinforced foam concrete with marble waste and calcium aluminate cement

Bayraktar O., Yarar G., Benli A., KAPLAN G., Gencel O., SÜTÇÜ M., et al.
STRUCTURAL CONCRETE , cilt.24, sa.1, ss.1152-1178, 2023 (SCI-Expanded) identifier identifier

Toxic gas removal with kaolinite, metakaolinite, radiolarite, and diatomite

Bayram A., Arkan E., SÜTÇÜ M.
Chemosphere , cilt.314, 2023 (SCI-Expanded) identifier identifier

Assessment of Mineralogical Characteristics of Clays and the Effect of Waste Materials on Their Index Properties for the Production of Bricks

Danish A., Totiç E., Bayram M., SÜTÇÜ M., Gencel O., Erdoğmuş E., et al.
Materials , cilt.15, sa.24, 2022 (SCI-Expanded) identifier

Development, characterization, and performance analysis of shape-stabilized phase change material included-geopolymer for passive thermal management of buildings

Gencel O., Harja M., SARI A., HEKİMOĞLU G., Ustaoğlu A., SÜTÇÜ M., et al.
International Journal of Energy Research , cilt.46, sa.15, ss.21841-21855, 2022 (SCI-Expanded) identifier

Characteristics, energy saving and carbon emission reduction potential of gypsum wallboard containing phase change material

Yaras A., Ustaoglu A., Gencel O., SARI A., HEKİMOĞLU G., SÜTÇÜ M., et al.
Journal of Energy Storage , cilt.55, 2022 (SCI-Expanded) identifier

Experimental evaluation of the luminescence performance of fired clay brick coated with SrAl2O4:Eu/Dy phosphor

Gencel O., Danish A., Yilmaz M., Erdogmus E., SÜTÇÜ M., Ozbakkaloglu T., et al.
Ceramics International , cilt.48, sa.22, ss.33167-33176, 2022 (SCI-Expanded) identifier

Recycling of marble cutting waste additives in fired clay brick structure: a statistical approach to process parameters

Erdogmus E., Yaras A., SÜTÇÜ M., Gencel O.
Environmental Science and Pollution Research , cilt.29, sa.47, ss.71936-71947, 2022 (SCI-Expanded) identifier identifier identifier

Recycling of metallurgical wastes in ceramics: A sustainable approach

Er Y., SÜTÇÜ M., Gencel O., Totiç E., Erdogmus E., Cay V. V., et al.
Construction and Building Materials , cilt.349, 2022 (SCI-Expanded) identifier identifier

Development of visible light active self-cleaning clay roofing tiles as novel building materials: An investigation on the effects of α-Fe2O3 coating and firing temperature

Yavaş A., Güneş F., EROL M., SÜTÇÜ M., Güler S., Torman Kayalar M., et al.
Journal of Cleaner Production , cilt.362, 2022 (SCI-Expanded) identifier

An experimental approach to a cementitious lightweight composite mortar using synthetic wollastonite

Kalkan Ş. O., Yavaş A., Güler S., Torman Kayalar M., SÜTÇÜ M., Gündüz L.
Construction and Building Materials , cilt.341, 2022 (SCI-Expanded) identifier identifier

Preparation and characterization of anorthite ceramics from sugar production solid waste: a statistical analysis of grinding parameters

Kaya V. S., SÜTÇÜ M., YALAMAÇ E.
Journal of the Australian Ceramic Society , cilt.58, sa.3, ss.1025-1037, 2022 (SCI-Expanded) identifier identifier

Foam Concrete Produced with Recycled Concrete Powder and Phase Change Materials

Gencel O., Nodehi M., HEKİMOĞLU G., Ustaoğlu A., SARI A., KAPLAN G., et al.
Sustainability (Switzerland) , cilt.14, sa.12, 2022 (SCI-Expanded) identifier

Production and characterization of natural clay-free green building brick materials using water treatment sludge and oak wood ash

Harja M., Gencel O., SARI A., SÜTÇÜ M., Erdogmus E., HEKİMOĞLU G.
Archives of Civil and Mechanical Engineering , cilt.22, sa.2, 2022 (SCI-Expanded) identifier

Manufacturing of fired bricks derived from wastes: utilization of water treatment sludge and concrete demolition waste

Gencel O., Kizinievic O., Erdogmus E., Kizinievic V., SÜTÇÜ M., Muñoz P.
Archives of Civil and Mechanical Engineering , cilt.22, sa.2, 2022 (SCI-Expanded) identifier

Effects of expanded vermiculite on the properties of fired bricks from water treatment sludge

Gencel O., Kizinievic O., SÜTÇÜ M., Erdogmus E., Velasco P. M., Eliche-Quesada D., et al.
International Journal of Applied Ceramic Technology , cilt.19, sa.3, ss.1214-1226, 2022 (SCI-Expanded) identifier

Investigation of physico-mechanical, thermal properties and solar thermoregulation performance of shape-stable attapulgite based composite phase change material in foam concrete

Gencel O., Ustaoglu A., Benli A., HEKİMOĞLU G., SARI A., Erdogmus E., et al.
Solar Energy , cilt.236, ss.51-62, 2022 (SCI-Expanded) identifier identifier

Low cost and eco-friendly building materials derived from wastes: Combined effects of bottom ash and water treatment sludge

SÜTÇÜ M., Gencel O., Erdogmus E., Kizinievic O., Kizinievic V., Karimipour A., et al.
Construction and Building Materials , cilt.324, 2022 (SCI-Expanded) identifier

Effect of nanofiber as nanopore maker agent on the performance of clinker bricks

Arslan C., Borazan I., Gencel O., Erdogmus E., SÜTÇÜ M.
Construction and Building Materials , cilt.324, 2022 (SCI-Expanded) identifier identifier

Cement based-thermal energy storage mortar including blast furnace slag/capric acid shape-stabilized phase change material: Physical, mechanical, thermal properties and solar thermoregulation performance

Gencel O., Yaras A., HEKİMOĞLU G., Ustaoglu A., Erdogmus E., SÜTÇÜ M., et al.
Energy and Buildings , cilt.258, 2022 (SCI-Expanded) identifier identifier

Characterization of perlite powders from Izmir, Türkiye region

Aksoy Ö., Alyamaç E., Mocan M., SÜTÇÜ M., Özveren-Uçar N., Seydibeyoğlu M. Ö.
Physicochemical Problems of Mineral Processing , cilt.58, sa.6, 2022 (SCI-Expanded) Creative Commons License identifier identifier

Recycle of ground granulated blast furnace slag and fly ash on eco-friendly brick production

Surul O., BİLİR T., Gholampour A., SÜTÇÜ M., Ozbakkaloglu T., Gencel O.
European Journal of Environmental and Civil Engineering , cilt.26, sa.5, ss.1738-1756, 2022 (SCI-Expanded) identifier

A novel energy-effective and carbon-emission reducing mortars with bottom ash and phase change material: Physico-mechanical and thermal energy storage characteristics

Gencel O., HEKİMOĞLU G., SARI A., SÜTÇÜ M., Er Y., Ustaoglu A.
Journal of Energy Storage , cilt.44, 2021 (SCI-Expanded) identifier identifier

Effect of firing temperature on self-cleaning and photocatalytic performance of clay-based bricks under visible light irradiation

Yavas A., Guler S., Kayalar M. T., SÜTÇÜ M., EROL M., Gencel O., et al.
Journal of the Australian Ceramic Society , cilt.57, sa.5, ss.1397-1406, 2021 (SCI-Expanded) identifier

Eco-friendly building materials containing micronized expanded vermiculite and phase change material for solar based thermo-regulation applications

Gencel O., SARI A., Ustaoglu A., HEKİMOĞLU G., Erdogmus E., Yaras A., et al.
Construction and Building Materials , cilt.308, 2021 (SCI-Expanded) identifier

Investigation of the residential building having novel environment-friendly construction materials with enhanced energy performance in diverse climate regions: Cost-efficient, low-energy and low-carbon emission

Ustaoglu A., Yaras A., SÜTÇÜ M., Gencel O.
Journal of Building Engineering , cilt.43, 2021 (SCI-Expanded) identifier identifier

Recycling industrial slags in production of fired clay bricks for sustainable manufacturing

Gencel O., Munir M. J., Kazmi S. M. S., SÜTÇÜ M., Erdogmus E., Velasco P. M., et al.
Ceramics International , cilt.47, sa.21, ss.30425-30438, 2021 (SCI-Expanded) identifier

Combined effects of bayer process bauxite waste (red mud) and agricultural waste on technological properties of fired clay bricks

Atan E., SÜTÇÜ M., Cam A. S.
Journal of Building Engineering , cilt.43, 2021 (SCI-Expanded) identifier

New construction materials synthesized from water treatment sludge and fired clay brick wastes

Erdogmus E., Harja M., Gencel O., SÜTÇÜ M., Yaras A.
Journal of Building Engineering , cilt.42, 2021 (SCI-Expanded) identifier

Effect of waste-based micro cellulose fiber as pore maker on characteristics of fired clay bricks

Arslan C., Gencel O., Borazan I., SÜTÇÜ M., Erdogmus E.
Construction and Building Materials , cilt.300, 2021 (SCI-Expanded) identifier

Feasibility of using clay-free bricks manufactured from water treatment sludge, glass, and marble wastes: An exploratory study

Gencel O., Kazmi S. M. S., Munir M. J., SÜTÇÜ M., Erdogmus E., Yaras A.
Construction and Building Materials , cilt.298, 2021 (SCI-Expanded) identifier

Recycling and immobilization of zinc extraction residue in clay-based brick manufacturing

Yaras A., SÜTÇÜ M., Erdogmus E., Gencel O.
Journal of Building Engineering , cilt.41, 2021 (SCI-Expanded) identifier

Gamma and neutron attenuation characteristics of bricks containing zinc extraction residue as a novel shielding material

Gencel O., Bozkurt A., Kam E., Yaras A., Erdogmus E., SÜTÇÜ M.
Progress in Nuclear Energy , cilt.139, 2021 (SCI-Expanded) identifier

Effect of waste marble powder and rice husk ash on the microstructural, physico-mechanical and transport properties of foam concretes exposed to high temperatures and freeze–thaw cycles

Gencel O., Benli A., Bayraktar O. Y., KAPLAN G., SÜTÇÜ M., Elabade W. A. T.
Construction and Building Materials , cilt.291, 2021 (SCI-Expanded) identifier

Physico-mechanical, durability and thermal properties of basalt fiber reinforced foamed concrete containing waste marble powder and slag

Yavuz Bayraktar O., KAPLAN G., Gencel O., Benli A., SÜTÇÜ M.
Construction and Building Materials , cilt.288, 2021 (SCI-Expanded) identifier identifier

Thermal Performance Optimization of Lightweight Concrete/EPS Layered Composite Building Blocks

Gencel O., del Coz Díaz J. J., SÜTÇÜ M., Kocyigit F., Rabanal F. P. Á., Alonso-Martínez M., et al.
International Journal of Thermophysics , cilt.42, sa.4, 2021 (SCI-Expanded) identifier identifier

Investigation of Thermal Properties of Waste Tungsten Carbide (WC) loaded HDPE Matrix

Kaya N., Atan E., SÜTÇÜ M.
Materials Today Communications , cilt.25, 2020 (SCI-Expanded) identifier identifier

Effects of concrete waste on characteristics of structural fired clay bricks

Gencel O., Erdugmus E., SÜTÇÜ M., Oren O. H.
Construction and Building Materials , cilt.255, 2020 (SCI-Expanded) identifier

Effect of heat treatment parameters on the crystallization of feldspathic-based dental glass-ceramics

YALAMAÇ E., SÜTÇÜ M., Ergani E. S.
Journal of Asian Ceramic Societies , cilt.8, sa.3, ss.685-693, 2020 (SCI-Expanded) identifier

Growth of ZnO nanowires on carbon fibers for photocatalytic degradation of methylene blue aqueous solutions: An investigation on the optimization of processing parameters through response surface methodology/central composite design

Tunç I. D., EROL M., Güneş F., SÜTÇÜ M.
Ceramics International , cilt.46, sa.6, ss.7459-7474, 2020 (SCI-Expanded) identifier

Characteristics of lightweight diatomite-based insulating firebricks

Dal S., SÜTÇÜ M., Gok M. S., Gencel O.
Journal of the Korean Ceramic Society , cilt.57, sa.2, ss.184-191, 2020 (SCI-Expanded) identifier

Utilization of sugar processing filter cake instead of calcite in production of anorthite based ceramics

Kaya V. S., SÜTÇÜ M.
Journal of Ceramic Processing Research , cilt.21, sa.4, ss.425-432, 2020 (SCI-Expanded) identifier

Use of carbonation sludge in clay based building materials processing for eco-friendly, lightweight and thermal insulation

Yaras A., SÜTÇÜ M., Gencel O., Erdogmus E.
Construction and Building Materials , cilt.224, ss.57-65, 2019 (SCI-Expanded) identifier

Recycling of bottom ash and fly ash wastes in eco-friendly clay brick production

SÜTÇÜ M., Erdogmus E., Gencel O., Gholampour A., Atan E., Ozbakkaloglu T.
Journal of Cleaner Production , cilt.233, ss.753-764, 2019 (SCI-Expanded) identifier

Influence of tea waste concentration in the physical, mechanical and thermal properties of brick clay mixtures

ÖZTÜRK S., SÜTÇÜ M., Erdogmus E., Gencel O.
Construction and Building Materials , cilt.217, ss.592-599, 2019 (SCI-Expanded) identifier

Water affinity guided tunable superhydrophobicity and optimized wettability of selected natural minerals

Alptekin H., Arkan E., Özbek C., Can M., Farzaneh A., SÜTÇÜ M., et al.
Journal of Coatings Technology and Research , cilt.16, sa.1, ss.199-211, 2019 (SCI-Expanded) Creative Commons License identifier

Fabrication and characterization of olive pomace filled PP composites

Kaya N., Atagur M., Akyuz O., SEKİ Y., SARIKANAT M., SÜTÇÜ M., et al.
Composites Part B: Engineering , cilt.150, ss.277-283, 2018 (SCI-Expanded) identifier identifier

Theoretical and empirical thermal conductivity models of red mud filled polymer composites

KÜÇÜKDOĞAN ÖZTÜRK N., Aydin L., SÜTÇÜ M.
Thermochimica Acta , cilt.665, ss.76-84, 2018 (SCI-Expanded) identifier

Effects of disc milling parameters on the physical properties and microstructural characteristics of Ti6Al4V powders

DİKİCİ T., SÜTÇÜ M.
Journal of Alloys and Compounds , cilt.723, ss.395-400, 2017 (SCI-Expanded) identifier identifier

Effect of olive mill waste addition on the properties of porous fired clay bricks using Taguchi method

SÜTÇÜ M., ÖZTÜRK S., YALAMAÇ E., Gencel O.
Journal of Environmental Management , cilt.181, ss.185-192, 2016 (SCI-Expanded) identifier identifier

A novel lightweight gypsum composite with diatomite and polypropylene fibers

Gencel O., Del Coz Diaz J. J., SÜTÇÜ M., KÖKSAL F., Álvarez Rabanal F. P., Martínez-Barrera G.
Construction and Building Materials , cilt.113, ss.732-740, 2016 (SCI-Expanded) identifier identifier

Characteristics of fired clay bricks with waste marble powder addition as building materials

SÜTÇÜ M., Alptekin H., Erdogmus E., Er Y., Gencel O.
Construction and Building Materials , cilt.82, ss.1-8, 2015 (SCI-Expanded) identifier

Influence of expanded vermiculite on physical properties and thermal conductivity of clay bricks

SÜTÇÜ M.
Ceramics International , cilt.41, sa.2, ss.2819-2827, 2015 (SCI-Expanded) identifier

Thermal performance optimization of hollow clay bricks made up of paper waste

SÜTÇÜ M., Del Coz Díaz J. J., Álvarez Rabanal F. P., Gencel O., Akkurt S.
Energy and Buildings , cilt.75, ss.96-108, 2014 (SCI-Expanded) identifier identifier

Properties of gypsum composites containing vermiculite and polypropylene fibers: Numerical and experimental results

Gencel O., Del Coz Diaz J. J., SÜTÇÜ M., KÖKSAL F., Alvarez Rabanal F., Martinez-Barrera G., et al.
Energy and Buildings , cilt.70, ss.135-144, 2014 (SCI-Expanded) identifier identifier

Neutron radiation tests about FeCr slag and natural zeolite loaded brick samples

Cay V. V., SÜTÇÜ M., Gencel O., Korkut T.
Science and Technology of Nuclear Installations , cilt.2014, 2014 (SCI-Expanded) identifier identifier

Properties of bricks with waste ferrochromium slag and zeolite

Gencel O., SÜTÇÜ M., Erdogmus E., Koc V., Cay V. V., Gok M. S.
Journal of Cleaner Production , cilt.59, ss.111-119, 2013 (SCI-Expanded) identifier identifier

Production of anorthite refractory insulating firebrick from mixtures of clay and recycled paper waste with sawdust addition

SÜTÇÜ M., Akkurt S., Bayram A., Uluca U.
Ceramics International , cilt.38, sa.2, ss.1033-1041, 2012 (SCI-Expanded) identifier identifier

Utilization of recycled paper processing residues and clay of different sources for the production of porous anorthite ceramics

SÜTÇÜ M., Akkurt S.
Journal of the European Ceramic Society , cilt.30, sa.8, ss.1785-1793, 2010 (SCI-Expanded) identifier identifier

A microstructural study of surface hydration on a magnesia refractory

SÜTÇÜ M., Akkurt S., Okur S.
Ceramics International , cilt.36, sa.5, ss.1731-1735, 2010 (SCI-Expanded) Creative Commons License identifier

Influence of crystallographic orientation on hydration of MgO single crystals

SÜTÇÜ M., Akkurt S., Okur S.
Ceramics International , cilt.35, sa.7, ss.2571-2576, 2009 (SCI-Expanded) identifier identifier

The use of recycled paper processing residues in making porous brick with reduced thermal conductivity

SÜTÇÜ M., Akkurt S.
Ceramics International , cilt.35, sa.7, ss.2625-2631, 2009 (SCI-Expanded) identifier identifier

DOE and ANN models for powder mixture packing

Akkurt S., Romagnoli M., SÜTÇÜ M.
American Ceramic Society Bulletin , cilt.86, sa.7, ss.9101-9111, 2007 (SCI-Expanded) identifier identifier

ANN model for prediction of powder packing

SÜTÇÜ M., Akkurt S.
Journal of the European Ceramic Society , cilt.27, sa.2-3, ss.641-644, 2007 (SCI-Expanded) identifier identifier
Diğer Dergilerde Yayınlanan Makaleler

Production and Characterization of Porous Anorthite Ceramics Using Sugar Process Solid Waste, Chamotte and Coal Powder Additives

KAYA V. S., SÜTÇÜ M., YALAMAÇ E., ERTUĞRUL O.
Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi , cilt.26, sa.78, ss.433-439, 2024 (Hakemli Dergi)

Fabrication of Porous Anorthite Ceramics Using Eggshell Waste as a Calcium Source and Expanded Polystyrene Granules

Torman Kayalar M., Erdogan G., Yavas A., Güler S., SÜTÇÜ M.
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.25, sa.3, ss.1235-1241, 2022 (ESCI) identifier

Recovery of Pressed Titanium Alloy Machining Chip via Vacuum Induction Melting

Teke E., SÜTÇÜ M., Başkurt Y., SEYDİBEYOĞLU M. Ö.
Scientific Research Communications , cilt.2, sa.1, ss.1-15, 2022 (Hakemli Dergi)

Elektrik Dağıtım Sektöründe Kaza Kök Nedenleri

Şahin C., SÜTÇÜ M.
ISG Akademik , cilt.2, sa.1, ss.1-14, 2020 (Hakemli Dergi)

Investigation of mechanical properties of paper processing residue filled high density polyethylene (hdpe) composites

Küçükdogan N., Halis S., SÜTÇÜ M., Sarikanat M., SEKİ Y., Sever K.
PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , cilt.23, sa.8, ss.949-953, 2017 (Hakemli Dergi) identifier

Ceramic fibers

Yalamaç E., SÜTÇÜ M., Basturk S.
FIBER TECHNOLOGY FOR FIBER-REINFORCED COMPOSITES , ss.187-207, 2017 (Hakemli Dergi) identifier

Bio composites based on polypropylene filled with waste of camellia sinensis

KUCUKDOGAN N., ÖZTÜRK S., SÜTÇÜ M.
ARCHIVES OF MATERIALS SCIENCE AND ENGINEERING , cilt.79, sa.1, ss.12-18, 2016 (Scopus) identifier

Alternatif hammadde olarak kâğıt sanayi üretim atığı kullanılarak hafif refrakter izolasyon tuğlası geliştirilmesi

SÜTÇÜ M., AKKURT S.
Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi , cilt.14, sa.VIII.Seramik Kongresi Özel Sayısı (OZ5780), ss.509-516, 2014 (Hakemli Dergi)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler

Production and Characterization of Industrial Waste Quartz-added Fired Clay Bricks

GÜLER S., YAVAŞ A., SÜTÇÜ M.
6th International Students Science Congress (ISSC 2022), İzmir, Türkiye, 20 Mayıs 2022, ss.70, (Özet Bildiri)

A Research On The Physical, Mechanical And Microstructural Properties Of Zinc Oxide Doped Lithium Silicate Glass-Ceramics

YALAMAÇ E., ÇİDEM A., SÜTÇÜ M.
V. Uluslararası Seramik, Cam, Emaye, Sır ve Boya Kongresi (SERES'21), Eskişehir, Türkiye, 13 Ekim 2021, (Özet Bildiri)

The self-cleaning properties of zinc extraction residue added clay bricks.

TORMAN KAYALAR M., YAVAŞ A., GÜLER S., SÜTÇÜ M., EROL M., YARAŞ A., et al.
4th International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC 2021), Nevşehir, Türkiye, 28 Mayıs 2021, ss.270, (Özet Bildiri)

Effect of Milling on Physical Properties of Zirconia Powders Recycling from Dental Zirconia Based Pre-Sintered Block Residuals

TORMAN KAYALAR M., YAVAŞ A., GÜLER S., SÜTÇÜ M.
4th International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC 2021), Nevşehir, Türkiye, 28 Mayıs 2021, ss.269, (Özet Bildiri)

Çinko oksit katkısının lityum disilikat cam seramik yapılara etkisinin incelenmesi

ÇİDEM A., YALAMAÇ E., SÜTÇÜ M.
Manisa Celal Bayar University, ÜSİTEM 3. International University Industry Cooperation, R&D and Innovation Congress, Manisa, Türkiye, 29 Aralık 2020, (Özet Bildiri)

The Photocatalytic Performances of Clay Bricks

YAVAŞ A., GÜLER S., TORMAN KAYALAR M., SÜTÇÜ M., EROL M., YARAŞ A., et al.
5. International Conference on Material Science and Technology (IMSTEC 2020), Nevşehir, Türkiye, 16 - 18 Eylül 2020, ss.261, (Özet Bildiri)

Combined use of fly ash and marble powder in clay brick structure.

ERDOĞMUŞ E., YARAŞ A., KOÇYİĞİT Ş., SÜTÇÜ M., GENÇEL O.
4th International Engineering and Natural Sciences Conference (IENSC 2019), Diyarbakır, Türkiye, 6 - 08 Kasım 2019, ss.979-983, (Tam Metin Bildiri)

Physical properties of clay based brick with paper mill sludge and carbonation sludge.

YARAŞ A., ERDOĞMUŞ E., KOÇYİĞİT Ş., GENÇEL O., SÜTÇÜ M.
4th International Engineering and Natural Sciences Conference (IENSC 2019), Diyarbakır, Türkiye, 6 - 08 Kasım 2019, ss.954-958, (Tam Metin Bildiri)

Physical and mechanical properties of clay based bricks containing water treatment sludge.

GENÇEL O., YARAŞ A., KOÇYİĞİT Ş., SÜTÇÜ M., ERDOĞMUŞ E.
4th International Engineering and Natural Sciences Conference (IENSC 2019), Diyarbakır, Türkiye, 6 - 08 Kasım 2019, ss.992-998, (Tam Metin Bildiri)

LİTYUM SİLİKAT CAM-SERAMİKLERİN KRİSTALİZASYONU VE KARAKTERİZASYONU

YALAMAÇ E., SÜTÇÜ M., ÇİDEM A.
The International Conference on Materials Science, Mechanical and Automation Engineerings and Technology in CAPPADOCIA/TURKEY (IMSMATEC’19), Nevşehir, Türkiye, 21 - 23 Haziran 2019, (Tam Metin Bildiri)

The use of carbonation sludge as pore former in clay bricks to improve insulation in construction applications

SÜTÇÜ M., YARAŞ A., GENÇEL O., ERDOĞMUŞ E.
The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in Cappadocia/Turkey (IMSMATEC 2019), Nevşehir, Türkiye, 21 - 23 Haziran 2019, ss.1047-1051, (Tam Metin Bildiri)

MICROSTRUCTURE AND PHYSICAL PROPERTIES OF CLAYEY-CERAMIC MATERIALS WITH LIGHTWEIGHT MINERAL ADDITIVES

DAL S., SÜTÇÜ M., GÖK M. S., GENÇEL O.
The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in CAPPADOCIA/TURKEY (IMSMATEC’19), June 21-23 2019, Türkiye, 21 - 23 Haziran 2019, ss.1052-1057, (Tam Metin Bildiri)

İş kazası riskine yönelik çalışma ortamı ve demografik değişkenlerin belirleyici etkisinin incelenmesi.

ŞAHİN C., SÜTÇÜ M.
4. Uluslararası İş Güvenliği ve Çalışan Sağlığı Kongresi, Ankara, Türkiye, 12 - 13 Nisan 2019, ss.97-107, (Tam Metin Bildiri)

Production of anorthite based ceramics from industrial food and ceramic processing wastes

KAYA V. S., SÜTÇÜ M.
International Conference on Research in Engineering, Technology and Science (ICRETS), Lizbon, Portekiz, 3 - 07 Şubat 2019, (Özet Bildiri)

Characterization of clay based bricks with bottom ash and fly ash waste addition.

ERDOĞMUŞ E., SÜTÇÜ M., GENÇEL O., ÇAY V. V.
International Engineering and Natural Sciences Conference (IENSC 2018), Diyarbakır, Türkiye, 14 - 17 Kasım 2018, ss.624-630, (Tam Metin Bildiri)

Investigation of the usability of construction demolition wastes in the production of building bricks.

ERDOĞMUŞ E., SÜTÇÜ M., GENÇEL O., KOÇYİĞİT Ş.
International Engineering and Natural Sciences Conference (IENSC 2018), Diyarbakır, Türkiye, 14 - 17 Kasım 2018, ss.604-610, (Tam Metin Bildiri)

Farklı tür cüruf katkılarının yapı tuğlasının fiziksel, mekanik ve mikroyapısal özelliklerine etkileri.

ERDOĞMUŞ E., SÜTÇÜ M., GENÇEL O.
2nd International Symposium on Multidisciplinary Studies and Innovative Technologies (ISMSIT 2018), Ankara, Türkiye, 19 - 21 Ekim 2018, ss.177-181, (Tam Metin Bildiri)

Utilization of Sugar Beet Press Filter Cake in Different Ratios For Production of Calcium Alumina Silicate (CAS) Ceramic Bodies

KAYA V. S., SÜTÇÜ M.
IV. International Ceramic, Glass, Porcelain Enamel, Glaze and Pigment Congress (SERES 2018), Eskişehir, Türkiye, 10 - 12 Ekim 2018, (Özet Bildiri)

Production and characterization of lightweight and porous diatomite based refractories

DAL S., SÜTÇÜ M., GÖK M. S., GENÇEL O.
3rd International Conference on Material Science and Technology in Cappadocia (IMSTEC 2018), Nevşehir, Türkiye, 17 - 19 Eylül 2018, (Tam Metin Bildiri)

Characterization of Al7075 alloy processed by Equal Channel Angular Pressing (ECAP)

YEŞİL M. M., ATAN E., SÜTÇÜ M.
2nd International Students Science Congress, İzmir, Türkiye, 4 - 05 Mayıs 2018, ss.208-216, (Tam Metin Bildiri)

DENTAL CAD/CAM UYGULAMALARI İÇİN TİCARİ İŞLENEBİLİR FELDSPATİK ESASLI CAM-SERAMİK BLOKLARIN KARAKTERİZASYONU

YALAMAÇ E., SÜTÇÜ M., ÇİDEM A., TÜNAYDIN G.
The international Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC), 10 - 12 Nisan 2018, ss.136-140, (Tam Metin Bildiri)

Characterization of anorthite based ceramics produced from sugar beet fılter cake and clay mixtures

KAYA V. S., SÜTÇÜ M.
The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC 2018), 10 - 12 Nisan 2018, ss.531, (Özet Bildiri)

Characterization of commercial machinable feldspathic based glass-ceramic blocks for dental Cad/Cam applications

YALAMAÇ E., SÜTÇÜ M., Çidem A., Tünaydın G.
The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC 2018), İzmir, Türkiye, 10 - 12 Nisan 2018, ss.136-140, (Tam Metin Bildiri)

A study on coatability of Seydişehir Bayer alumina powders by plasma spraying on aluminum alloy.

SÜTÇÜ M., Teke E., DİKİCİ T.
The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC 2018), 10 - 12 Nisan 2018, ss.627-630, (Tam Metin Bildiri)

Investigation of rheological properties of waste tunsten carbide (WC) particles loaded high density polyethylene (HDPE) matrix based composites.

KAYA N., ATAN E., SÜTÇÜ M., DEMİÇ Ş.
The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC 2018), İzmir, Türkiye, 10 - 12 Nisan 2018, ss.709, (Özet Bildiri)

Investıgatıon Of Rheologıcal Propertıes Of Three Dıfferent Partıcles Sızed 50 Sılıcon Carbıde (Sic) Loaded Polypropylene (Pp) Matrıx Based Composıtes

KAYA N., ATAN E., SÜTÇÜ M., DEMİÇ Ş.
The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, İzmir, Türkiye, 10 - 12 Nisan 2018, ss.397, (Özet Bildiri)

Kağıt Üretim Atığı Katkılı Yüksek Yoğunluklu Polietilen (YYPE) Kompozitlerin Mekanik Özelliklerinin İncelenmesi

KÜÇÜKDOĞAN ÖZTÜRK N., HALİS S., SÜTÇÜ M., SARIKANAT M., SEKİ Y., SEVER K.
16. International Metarials Symposium, Denizli, Türkiye, 12 Ekim 2016, (Tam Metin Bildiri)

Investigation of Thermal Decomposition Kinetics of Ulexite/Polypropylene Composites: Activation Energies with Thermogravimetric Analysis

KÜÇÜKDOĞAN ÖZTÜRK N., AYDIN L., SÜTÇÜ M.
5. International Polimeric Composites, İzmir, Türkiye, 03 Kasım 2017, (Tam Metin Bildiri)

Çam Fıstığı Kabuklarının Tuğla Üretiminde Gözenek Yapıcı Olarak Kullanılabilirliğinin İncelenmesi

ÖZTÜRK S., KÜÇÜKDOĞAN ÖZTÜRK N., SÜTÇÜ M.
16. International Materials Symposium, Denizli, Türkiye, 12 Ekim 2016, (Tam Metin Bildiri)

Kolemanit/Polipropilen Kompozitlerin Termal Dekompozisyon Kinetiğinin İncelenmesi Termogravimetrik Analiz ile Aktivasyon Enerjisinin Hesaplanması

KÜÇÜKDOĞAN ÖZTÜRK N., AYDIN L., SÜTÇÜ M.
5. International Polimeric Composites, İzmir, Türkiye, 03 Kasım 2017, (Tam Metin Bildiri)

Effect of heat treatment condirions on the crystallization of dental glass ceramics

YALAMAÇ E., SÜTÇÜ M., ERGANİ E. S.
1. INTERNATIONAL UNIVERSITYINDUSTRY COOPERATION, RD ANDINNOVATION CONGRESS, 18 - 19 Aralık 2017, (Özet Bildiri)

Effect of heat treatment conditions on the crystallization of dental glass-ceramics

YALAMAÇ E., SÜTÇÜ M., ERGANİ E. S.
MANİSA CELAL BAYAR ÜNİVERSİTESİ (ÜSİTEM) 1.ULUSLARARASI ÜNİVERSİTE-SANAYİ İŞBİRLİĞİ, AR-GE VE İNOVASYON KONGRESİ, Manisa, Türkiye, 18 - 19 Aralık 2017, (Özet Bildiri)

Characterization of feldspathic based dental glass-ceramics

SÜTÇÜ M., YALAMAÇ E., TÜNAYDIN G., ÇİDEM A.
MANİSA CELAL BAYAR ÜNİVERSİTESİ (ÜSİTEM) 1.ULUSLARARASI ÜNİVERSİTE-SANAYİ İŞBİRLİĞİ, AR-GE VE İNOVASYON KONGRESİ, 18 - 19 Aralık 2017, (Özet Bildiri)

Characterization of Feldspatic based Dental Glass-Ceramics

SÜTÇÜ M., YALAMAÇ E., ÇİDEM A., TÜNAYDIN G.
1. INTERNATIONAL UNIVERSITYINDUSTRY COOPERATION, RD ANDINNOVATION CONGRESS, 18 - 19 Aralık 2017, (Özet Bildiri)

Kolemanit/polipropilen kompozitlerin termal dekompozisyon kinetiğinin incelenmesi: termogravimetrik analiz ile aktivasyon enerjisinin hesaplanması.

NİLAY K., AYDIN L., SÜTÇÜ M.
5th International Polymeric Composites Symposium and Workshops (IPC 2017), İzmir, Türkiye, 2 - 04 Kasım 2017, ss.310-315, (Tam Metin Bildiri)

Investigation thermal decomposition kinetics of ulexite/polypropylene composites: activation energies with thermogravimetric analysis.

KÜÇÜKDOĞAN N., AYDIN L., SÜTÇÜ M.
5th International Polymeric Composites Symposium and Workshops (IPC 2017), İzmir, Türkiye, 2 - 04 Kasım 2017, ss.316-321, (Tam Metin Bildiri)

Fabrication and characterization of fired clay bricks with paper processing waste and expanded perlite addition for building applications.

ÖKTEN I. S., BUDAK E., ÖZTÜRK S., SÜTÇÜ M.
2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC 2017), Nevşehir, Türkiye, 11 - 13 Ekim 2017, (Özet Bildiri)

Production and characterization of leucite based opaque porcelains fused to metals for dental restorations.

TÜNAYDIN G., ZİYLAN A., SÜTÇÜ M.
2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC 2017), Nevşehir, Türkiye, 11 - 13 Ekim 2017, (Özet Bildiri)

Characterization and Modification of Hollow Mullite Microspheres For The Application Of Polymer-Matrix Composites

Yalamaç E., Polatoğlu İ., Sütçü M., Çelik Erbaş S.
3rd International Porous and Powder Materials Symposium and Exhibition (PPM 2017), Aydın, Türkiye, 12 - 15 Eylül 2017, (Özet Bildiri)

The Use of Hazelnut Shell Wastes as Pore-Making Additive in Fired Clay Bricks

ATAN E., ÇAM A. S., SÜTÇÜ M.
2nd International Conference on Civil and Environmental Engineering (ICOCEE – Cappadocia 2017), Nevşehir, Türkiye, 8 - 10 Mayıs 2017, ss.3282, (Özet Bildiri)

Effects of Red Mud Waste Addition on Properties of Fired Clay Bricks

ÇAM A. S., ATAN E., SÜTÇÜ M.
2nd International Conference on Civil and Environmental Engineering (ICOCEE – Cappadocia 2017), Nevşehir, Türkiye, 8 - 10 Mayıs 2017, ss.3283, (Özet Bildiri)

EFFECT OF HOLLOW CERAMIC MICROSPHERES ON THERMAL CONDUCTIVITY MODELS AND COMPRESSIVE STRENGTH OF EPOXY COMPOSITES

YALAMAÇ E., POLATOĞLU İ., SÜTÇÜ M.
16th International Materials Symposium (IMSP,2016), 12 - 14 Ekim 2016, (Tam Metin Bildiri)

Bio composites based on polypropylene filled with waste of camellia sinensis

KÜÇÜKDOĞAN N., ÖZTÜRK S., SÜTÇÜ M.
16th International Materials Symposium (IMSP'2016), Denizli, Türkiye, 12 - 14 Ekim 2016, (Tam Metin Bildiri)

Evaluation of thermal conductivity models and compressive strength of hollow ceramic microsphere fılled polyester matrix composites

SÜTÇÜ M., POLATOĞLU İ., YALAMAÇ E.
16th International Materials Symposium (IMSP'2016), Denizli, Türkiye, 12 - 14 Ekim 2016, (Tam Metin Bildiri)

Çamfıstığı kabuklarının tuğla üretiminde gözenek yapıcı olarak kullanılabilirliğinin incelenmesi

ÖZTÜRK S., KÜÇÜKDOĞAN N., SÜTÇÜ M.
16th International Materials Symposium (IMSP'2016), Denizli, Türkiye, 12 - 14 Ekim 2016, (Tam Metin Bildiri)

Kağıt üretim atığı katkılı yüksek yoğunluklu polietilen YYPE kompozitlerin mekanik özelliklerinin incelenmesi

KÜÇÜKDOĞAN N., HALİS S., SÜTÇÜ M., SARIKANAT M., SEKİ Y., SEVER K.
16th International Materials Symposium (IMSP'2016), Denizli, Türkiye, 12 - 14 Ekim 2016, (Tam Metin Bildiri)

Investıgation of Coating Performance of Bayer Process Alumina Powders on AA6063 Al Alloy with the Plasma Spray Method

TEKE E., DİKİCİ T., SÜTÇÜ M.
16th International Materials Symposium (IMSP2016), 12 - 14 Ekim 2016, ss.175, (Özet Bildiri)

Viscoelastic and mechanical properties of olive pomace filled Polypropylene PP composites

KAYA N., ATAGÜR M., AKYÜZ O., SEKİ Y., SARIKANAT M., SEYDİBEYOĞLU M. Ö., et al.
3rd International Conference on Thermophysical and Mechanical Properties of Advanced Materials(THERMAM 2016), İzmir, Türkiye, 1 - 03 Eylül 2016, ss.8, (Özet Bildiri)

Effect of binder clay additions on the sintering properties of fireclay refractory bricks

DAL S., SÜTÇÜ M., GÖK M. S., GENÇEL O.
International Conference on Material Science and Technology in Cappadocia (IMSTEC’16), Nevşehir, Türkiye, 6 - 08 Nisan 2016, ss.957-961, (Tam Metin Bildiri)

Effect of sintering parameters on the mechanical properties of yttria stabilized zirconia ceramics

YALAMAÇ E., ERGANİ E. S., SÜTÇÜ M.
International Conference on Material Science and Technology in Cappadocia (IMSTEC’16), Nevşehir, Türkiye, 6 - 08 Nisan 2016, ss.265-268, (Tam Metin Bildiri)

Investigation of the properties of vermiculite based bricks produced using a clay binder

DAL S., SÜTÇÜ M., GÖK M. S., GENÇEL O.
International Conference on Material Science and Technology in Cappadocia (IMSTEC’16), Nevşehir, Türkiye, 6 - 08 Nisan 2016, ss.916-919, (Tam Metin Bildiri)

Effect of vermiculite addition on the sintering properties of fireclay refractory bricks

DAL S., SÜTÇÜ M., GÖK M. S., GENÇEL O.
International Conference on Material Science and Technology in Cappadocia (IMSTEC’16), Nevşehir, Türkiye, 6 - 08 Nisan 2016, ss.395-400, (Tam Metin Bildiri)

SİNTERLEME PARAMETRELERİNİN YİTRİYA STABİLE ZİRKONYASERAMİKLERİNİN MEKANİK ÖZELLİKLERİNE ETKİSİ

YALAMAÇ E., Ergani E. S., SÜTÇÜ M.
International Conference on Material Science and Technology in Cappadocia (IMSTEC’16), Nevşehir, Türkiye, 6 - 08 Nisan 2016, ss.265-268, (Tam Metin Bildiri)

Fındıkkabuğu ve evsel çay atığı katkılı yüksek yoğunluklu polietilen kompozitlerin fiziksel ve mekaniksel özelliklerinin belirlenmesi.

KÜÇÜKDOĞAN ÖZTÜRK N., ÖZTÜRK S., SÜTÇÜ M., SEVER K.
XIX. Ulusal Mekanik Kongresi, Trabzon, Türkiye, 24 - 29 Ağustos 2015, ss.795-801, (Tam Metin Bildiri)

Pirina atığı katkılı termoplastik kompozitlerin termo-kinetik (gelimat) mikser ile üretimi.

KÜÇÜKDOĞAN ÖZTÜRK N., SEVER K., SÜTÇÜ M., SARIKANAT M., SEKİ Y.
XIX. Ulusal Mekanik Kongresi, Trabzon, Türkiye, 24 - 28 Ağustos 2015, ss.787-794, (Tam Metin Bildiri)

Tarımsal atık ile katkılanmış yüksek yoğunluklu polietilen kompozitlerin fiziksel, mekanik ve termal özelliklerinin belirlenmesi

KÜÇÜKDOĞAN ÖZTÜRK N., SEVER K., SÜTÇÜ M., SEKİ Y., SEYDİBEYOĞLU M. Ö., SARIKANAT M.
XIX. Ulusal Mekanik Kongresi, Trabzon, Türkiye, 24 - 28 Ağustos 2015, ss.780-786, (Tam Metin Bildiri)

Investigation of mullite formation parameters using experimental design

SÜTÇÜ M., TÜRKAN U.
IX. Uluslararası Katılımlı Seramik Kongresi, Afyonkarahisar, Türkiye, 26 - 28 Kasım 2015, (Tam Metin Bildiri)

Fındıkkabuğu ve Evsel Çay Atığı Katkılı Yüksek Yoğunluklu Polietilen Kompozitlerin Fiziksel ve Mekanikse Özelliklerinin Belirlenmesi

KÜÇÜKDOĞAN ÖZTÜRK N., ÖZTÜRK S., SÜTÇÜ M., SEVER K.
XIX. Ulusal Mekanik Kongresi, Trabzon, Türkiye, 24 Ağustos 2015, (Tam Metin Bildiri)

Pirina Atığı Katkılı Termoplastik Kompozitlerin Termo-Kinetik Mikser İle Üretimi

KÜÇÜKDOĞAN ÖZTÜRK N., SEVER K., SEYDİBEYOĞLU M. Ö., SÜTÇÜ M., SARIKANAT M., SEKİ Y.
XIX. Ulusal Mekanik Kongresi, Trabzon, Türkiye, 24 Ağustos 0215, (Tam Metin Bildiri)

Utilization of eggshell waste as calcium source in the production of porous anorthite ceramics

ERDOĞAN G., SÜTÇÜ M., TÜRKAN U.
International Porous and Powder Materials Symposium and Exhibition (PPM 2015), 15 - 18 Eylül 2015, (Özet Bildiri)

An experimental design for the optimization of manufacturing process of porous bricks from olive mill waste

ÖZTÜRK S., SÜTÇÜ M., YALAMAÇ E., GENÇEL O.
International Porous and Powder Materials Symposium and Exhibition (PPM 2015), İzmir, Türkiye, 15 - 18 Eylül 2015, ss.273-277, (Tam Metin Bildiri)

Investigation of tunable wetting properties of modified natural mineral powders

Hande A., CAN M., Amir F., SÜTÇÜ M.
International Porous and Powder Materials Symposium and Exhibition (PPM 2015), İzmir, Türkiye, 15 - 18 Eylül 2015, (Özet Bildiri)

Evaluation of grinding parameters of bayer processed alumina powder by experimental design

YALAMAÇ E., Rabia K., SÜTÇÜ M.
International Porous and Powder Materials Symposium and Exhibition (PPM 2015), İzmir, Türkiye, 15 - 18 Eylül 2015, ss.111-114, (Tam Metin Bildiri)

Fındıkkabuğu ve Evsel Çay Atığı Katkılı Yüksek Yoğunluklu Polietilen Kompozitlerin Fiziksel ve Mekanik Özelliklerinin Belirlenmesi

KÜÇÜKDOĞAN N., ÖZTÜRK S., SÜTÇÜ M., SEVER K.
XIX. Ulusal Mekanik Kongresi, Trabzon, Türkiye, 24 - 28 Ağustos 2015, (Tam Metin Bildiri)

An investigation of mineralogical humidity and gas adsorbing properties of some natural minerals

SÜTÇÜ M., BAYRAM A.
International Porous and Powder Materials Symposium and Exhibition (PPM 2013), İzmir, Türkiye, 3 - 06 Eylül 2013, (Tam Metin Bildiri)

Alternatif hammadde olarak kâğıt sanayi üretim atığı kullanılarak hafif refrakter izolasyon tuğlası geliştirilmesi

SÜTÇÜ M., AKKURT S.
VIII. Uluslararası Katılımlı Seramik Kongresi, Afyonkarahisar, Türkiye, 22 - 24 Kasım 2012, (Tam Metin Bildiri)

Mikroalaşımlı vanadyum ve niobyum karbür içeren düşük karbonlu çeliklerin termo mekanik işlem sonrası iğnesel ferrit oluşumunun incelenmesi

ASKEROV H., KURT B., APAYDIN F., SÜTÇÜ M., KARAGÖZ M.
IISS’12 International Iron Steel Symposium, Karabük, Türkiye, 2 - 04 Nisan 2012, ss.551-557, (Tam Metin Bildiri)

Isı yalıtım özellikleri iyileştirilmiş yapı tuğlalarının geliştirilmesinde kağıt üretim atıklarının kullanılması etkileri

AKKURT S., SÜTÇÜ M.
X. Ulusal Tesisat Mühendisliği Kongresi ve Teskon Sodex Fuarı, Binalarda Enerji Performansı Sempozyumu, İzmir, Türkiye, 13 - 16 Nisan 2011, ss.899-908, (Tam Metin Bildiri)

Kağıt sanayii atık çamurlarının değişik tuğla bünyelerinde değerlendirilmesi

SÜTÇÜ M., AKKURT S.
VII. Uluslararası Katılımlı Seramik Kongresi, Kongre Bildiriler Kitabı, Afyonkarahisar, Türkiye, 26 - 28 Kasım 2008, ss.141-150, (Tam Metin Bildiri)

ANN model for prediction of powder mixture packing

SÜTÇÜ M., AKKURT S.
9th International Conference and Exhibition of the European Ceramic Society, Portoroz, Slovenya, 19 - 23 Haziran 2005, (Tam Metin Bildiri)
Kitaplar

Chapter 4: Lightweight Polymer Composites from Wood Flour, Metals, Alloys, Metallic Fibers, Ceramics

TEKE E., SÜTÇÜ M., ACAR V., SEYDİBEYOĞLU M. Ö.
Lightweight Polymer Composite Structures, Design and Manufacturing Techniques, Sanjay Mavinkere Rangappa, Jyotishkumar Parameswaranpillai, Suchart Siengchin, Lothar Kroll, Editör, CRC Press, Taylor Francis Group, Boca Raton, FL, ss.89-102, 2020

Chapter 145. Thermal degradation behavior and flame retardancy of organic and inorganic filled polymer composites.

KÜÇÜKDOĞAN N., SÜTÇÜ M., ÖZTÜRK S., AYDIN L., KAYABAŞI E., Sayı H.
The Most Recent Studies in Science and Art (Volume 2), ARAPGİRLİOĞLU HASAN, ATİK HÜSEYİN ATİLLA, ELLIOTT ROBERT L., Hiziroglu Salim, ATİK DİLEK, Editör, Gece Publishing, ss.1854-1865, 2018

Thermal Conductivity of Hetero-Phase Polymer Composites

KÜÇÜKDOĞAN ÖZTÜRK N., AYDIN L., ÖZTÜRK S., SÜTÇÜ M.
The Most Recent Studies in Science and Art, Arapgirlioğlu Hasan, Atik Atilla, Hızıroğlu Salim, ELLIOTT ROBERT L., Atik Dilek, Editör, Gece Kitaplığı, ss.1836-1844, 2018

Thermal Degradation Behavior and Flame Retardancy of Organic and Inorganic Filled Polymer Composites

KÜÇÜKDOĞAN ÖZTÜRK N., SÜTÇÜ M., ÖZTÜRK S., AYDIN L., KAYABAŞI E., SAYİ H.
The Most Recent Studies in Science and Art 2, Arapgirlioğlu Hasan, Atik Atilla, Hızıroğlu Salim, ELLIOTT ROBERT L., Atik Dilek, Editör, Gece Kitaplığı, ss.1854-1865, 2018

Chapter 143. Thermal conductivity of hetero-phase polymer composites

KÜÇÜKDOĞAN N., AYDIN L., ÖZTÜRK S., SÜTÇÜ M.
The Most Recent Studies in Science and Art. (Volume 2), ARAPGİRLİOĞLU HASAN, ATİK HÜSEYİN ATİLLA, ELLIOTT ROBERT L., Hiziroglu Salim, ATİK DİLEK, Editör, Gece Publishing, ss.1836-1843, 2018

Chapter 144. An Evaluation of the Current Status of Pulp and Paper Mill Sludge for Industrial Applications

KÜÇÜKDOĞAN N., SÜTÇÜ M., ÖZTÜRK S., Savran M.
The Most Recent Studies in Science and Art (Volume 2), ARAPGİRLİOĞLU HASAN, ATİK HÜSEYİN ATİLLA, ELLIOTT ROBERT L., Hiziroglu Salim, ATİK DİLEK, Editör, Gece Publishing, ss.1844-1853, 2018

Chapter 9: Ceramic Fibers

YALAMAÇ E., SÜTÇÜ M., BAŞTÜRK S. B.
Fiber Technology for Fiber Reinforced Composites, M. Özgür Seydibeyoğlu, Amar K. Mohanty, Manjusri Misra, Editör, Woodhead Publishing Series - Elsevier, ss.187-207, 2017
Metrikler

Yayın

161

Atıf (WoS)

1510

H-İndeks (WoS)

16

Atıf (Scopus)

1867

H-İndeks (Scopus)

18

Atıf (Scholar)

4354

H-İndeks (Scholar)

33

Atıf (Sobiad)

188

H-İndeks (Sobiad)

7

Proje

26

Tez Danışmanlığı

12

Açık Erişim

3
BM Sürdürülebilir Kalkınma Amaçları