Yayınlar & Eserler

Yayın Ağı
SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Production and Characterization of Highly Conductive Aluminum Metal for Electric Motor Applications

Yavaş A., Cilingir C., TÜRK A., Celik E.
Journal of Materials Engineering and Performance , cilt.34, sa.2, ss.1705-1716, 2025 (SCI-Expanded) identifier identifier

Influence of Inoculation and Texture on Enhancing Electrical Conductivity in Commercially Pure Aluminum for Squirrel-Cage Asynchronous Electrical Motors

Cilingir C., TÜRK A., Yavas A., YİĞİT R., Celik E.
International Journal of Metalcasting , 2024 (SCI-Expanded) identifier identifier

Design and production of dye-synthesized solar cells with FTO/TiO2/ferroelectric dye/electrolyte/Pt/FTO architecture

ÇOBAN ÖZKAN D., TÜRK A., Celik E.
Journal of the Australian Ceramic Society , cilt.59, sa.3, ss.727-738, 2023 (SCI-Expanded) identifier identifier

Synthesis and characterization of sol–gel derived LaFe0.5Mn0.5O3 perovskite powders for dye-sensitized solar cell applications

ÇOBAN ÖZKAN D., TÜRK A., Çelik E.
Journal of Materials Science: Materials in Electronics , cilt.33, sa.17, ss.13698-13719, 2022 (SCI-Expanded) identifier identifier

Synthesis and characterizations of LaMnO3 perovskite powders using sol–gel method

ÇOBAN ÖZKAN D., TÜRK A., Celik E.
Journal of Materials Science: Materials in Electronics , cilt.32, sa.11, ss.15544-15562, 2021 (SCI-Expanded) identifier

Investigation of in vitro behavior of plasma sprayed Ti, TiO2 and HA coatings on PEEK

SARGIN F., Erdogan G., KANBUR K., TÜRK A.
Surface and Coatings Technology , cilt.411, 2021 (SCI-Expanded) identifier

Synthesis and characterizations of sol–gel derived LaFeO3 perovskite powders

ÇOBAN ÖZKAN D., TÜRK A., Çelik E.
Journal of Materials Science: Materials in Electronics , cilt.31, sa.24, ss.22789-22809, 2020 (SCI-Expanded) identifier

A comparative study of oxidation kinetics and thermal cyclic performance of thermal barrier coatings (TBCs)

Karaoglanli A. C., Grund T., TÜRK A., Lampke T.
Surface and Coatings Technology , cilt.371, ss.47-67, 2019 (SCI-Expanded) identifier

Investigation of erosive wear behavior of granulated blast furnace slag on hard coated and uncoated steels Yüksek fırın granüle cürufunun sert kaplama uygulanmış ve uygulanmamış çeliklere karşı erozif aşındırma davranışının incelenmesi

Demirsöz R., Polat R., Türk A., Erdoğan G.
Journal of the Faculty of Engineering and Architecture of Gazi University , cilt.34, sa.1, ss.103-113, 2019 (SCI-Expanded) identifier

Isothermal oxidation behavior and kinetics of thermal barrier coatings produced by cold gas dynamic spray technique

Karaoglanli A. C., TÜRK A.
Surface and Coatings Technology , cilt.318, ss.72-81, 2017 (SCI-Expanded) identifier

Effect of sintering on mechanical properties of cold sprayed thermal barrier coatings

Karaoglanli A., TÜRK A., Ozdemir I.
Surface Engineering , cilt.32, sa.9, ss.686-690, 2016 (SCI-Expanded) identifier

Effect of shot peening on the oxidation behavior of thermal barrier coatings

Karaoglanli A. C., Döleker K. M., DEMİREL B., TÜRK A., VAROL R.
Applied Surface Science , cilt.354, ss.314-322, 2015 (SCI-Expanded) identifier identifier

Comparison of oxidation and thermal shock performance of thermal barrier coatings

Karaoglanli A. C., Turk A., Ozdemir I., Ustel F.
Materials and Manufacturing Processes , cilt.30, sa.6, ss.717-723, 2015 (SCI-Expanded) identifier identifier

A Comparative study of the microabrasion wear behavior of CoNiCrAlY coatings fabricated by APS, HVOF, and CGDS techniques

Karaoglanli A., Caliskan H., Gok M., Erdogan A., TÜRK A.
Tribology Transactions , cilt.57, sa.1, ss.11-17, 2013 (SCI-Expanded) identifier identifier

Cutting-tool recycling process with the zinc-melt method for obtaining thermal-spray feedstock powder (WC-Co)

Altuncu E., Ustel F., TÜRK A., ÖZTÜRK S., Erdogan G.
Materiali in Tehnologije , cilt.47, sa.1, ss.115-118, 2013 (SCI-Expanded) identifier identifier

Study of the microstructure and oxidation behavior of YSZ and YSZ/Al 2O 3 TBCs with HVOF bond coatings

Karaoǧlanh A. C., Erdoǧan G., Kahraman Y., Türk A., Ústel F., Özdemir I.
Materiali in Tehnologije , cilt.46, sa.5, ss.439-444, 2012 (SCI-Expanded) identifier

Accelerated corrosion behaviors of Zn, Al and Zn/15Al coatings on a steel surface

Gulec A., Cevher O., Turk A., Ustel F., Yilmaz F.
Materiali in Tehnologije , cilt.45, sa.5, ss.477-482, 2011 (SCI-Expanded) identifier

Structure and durability evaluation of YSZ+Al2O3 composite TBCs with APS and HVOF bond coats under thermal cycling conditions

Karaoglanli A., Altuncu E., Ozdemir I., Turk A., Ustel F.
Surface and Coatings Technology , cilt.205, sa.SUPPL. 2, 2011 (SCI-Expanded) identifier

Performance comparison of thermal-sprayed coatings for ductile iron pipe

Gulec A., Cevher O., Ustel F., Turk A., Akinci A., Yilmaz F.
Materials Performance , cilt.50, sa.2, ss.30-36, 2011 (SCI-Expanded) identifier

Investigation of wear behaviour of HVOF sprayed WC-Co coatings for automotive parts in different working conditions

Uzun A., Altuncu E., Ustel F., Turk A., ÖZTÜRK S.
International Journal of Surface Science and Engineering , cilt.5, sa.2-3, ss.180-192, 2011 (SCI-Expanded) identifier

The effect of samples geometry and thermal cycling test type on the thermal shock behaviour of plasma sprayed TBCs

Altuncu E., KaraalI E. I., Erdogan G., Ustel F., TÜRK A.
Plasma Processes and Polymers , cilt.6, sa.SUPPL. 1, 2009 (SCI-Expanded) identifier identifier

Characterization of plasma nitrided X32CrMoV33 die steel

TÜRK A., Bindal C.
Materials and Manufacturing Processes , cilt.24, sa.7-8, ss.898-902, 2009 (SCI-Expanded) identifier identifier

Microstructural, thermal and mechanical properties of HVOF sprayed Ni-Al-based bond coatings on stainless steel substrate

Culha O., ÇELİK E., AK AZEM N. F., BİRLİK I., Toparli M., TÜRK A.
Journal of Materials Processing Technology , cilt.204, sa.1-3, ss.221-230, 2008 (SCI-Expanded) identifier identifier

The effect of manganese on the microstructure and mechanical properties of zinc-aluminium based ZA-8 alloy

TÜRK A., Durman M., Kayali E. S.
Journal of Materials Science , cilt.42, sa.19, ss.8298-8305, 2007 (SCI-Expanded) identifier identifier

Comparison of the wear properties of modified ZA-8 alloys and conventional bearing bronze

TÜRK A., Kurnaz C., Şevik H.
Materials and Design , cilt.28, sa.6, ss.1889-1897, 2007 (SCI-Expanded) identifier identifier

The Effect of Ti-B and Sr on the mechanical behaviour of the Zinc-Aluminum-based ZA-12 alloy produced by gravity casting

Can Kurnaz S., Sevik H., TÜRK A., Ozsarac U.
International Journal of Materials Research , cilt.97, sa.8, ss.1152-1157, 2006 (SCI-Expanded) identifier identifier identifier

Assessment of microstructural and mechanical properties of HVOF sprayed WC-based cermet coatings for a roller cylinder

Celik E., Culha O., UYULGAN B., AK AZEM N. F., Ozdemir I., TÜRK A.
Surface and Coatings Technology , cilt.200, sa.14-15, ss.4320-4328, 2006 (SCI-Expanded) identifier identifier

Structural characterization of fluidized bed nitrided steels

TÜRK A., Ok O., Bindal C.
Vacuum , cilt.80, sa.4, ss.332-342, 2005 (SCI-Expanded) identifier identifier

The effect of Cu and Al on the mechanical properties of gravity-cast hyper-eutectic Zn–Al-based alloys

Türk A., Durman M., Kayalı E. S.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH , cilt.94, sa.9, ss.1001-1005, 2003 (SCI-Expanded)

Effect of copper on the creep behaviour of gravity-cast zinc-aluminium-based ZA-8 alloy

Türk A., Durman M., Kayalı E. S.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH , cilt.89, sa.5, ss.351-355, 1998 (SCI-Expanded)
Diğer Dergilerde Yayınlanan Makaleler

The Role of Water on the Oxidation Process of Graphene Oxide Structures

KANBUR K., BİRLİK I., Sargın F., Funda Ak Azem N., TÜRK A.
Sakarya University Journal of Science , cilt.28, sa.3, ss.567-578, 2024 (Scopus) identifier

Comparison of corrosion performance of Zn and Zn/Al 85/15 coatings produced by TWEA

Güleç A., Yilmaz F., Türk A., Üstel F.
Defect and Diffusion Forum , cilt.312-315, ss.325-330, 2011 (Scopus) identifier

Structural characterization of nitrided 34CrAlNi7 steel

TÜRK A., Ok O.
Kovove Materialy , cilt.47, sa.2, ss.121-127, 2009 (Scopus) identifier identifier

The effect of Ti alloying on the mechanical properties and microstructure of a Zn-Al-Cu-Mg alloy

TÜRK A., Durman M., Kayali E. S.
International Journal of Materials Research , cilt.94, sa.8, ss.892-896, 2003 (Scopus) identifier
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler

Optimization of Oxidation Time During Graphene Oxide Production

KANBUR K., BİRLİK I., SARGIN F., AK AZEM N. F., TÜRK A.
7th Internatonal Students Science Congress, Türkiye, 12 - 13 Mayıs 2023, (Tam Metin Bildiri)

Investigation of the Effect of Thermal Oxidation Process on Coating Efficiency in Ti6Al4V Samples Coated with Hydroxyapatite (HA) by Electrophoretic Deposition (EPD) Technique

KIZILÖZ A., KANBUR K., SARGIN F., ÖZTEN A., TÜRK A.
6 th International Students Science Congress, Türkiye, 12 - 13 Mayıs 2022, (Tam Metin Bildiri)

Investigation of Triton X-100 Use in PVA Nanofiber Production

ÖZTEN A., SARGIN F., KANBUR K., KIZILÖZ A., TÜRK A.
6 th International Students Science Congress, 20 Mayıs 2022, (Tam Metin Bildiri)

PRODUCTION AND CHARACTERIZATION OF CERIUM OXIDE NANOPARTICLES

SARGIN F., KANBUR K., TÜRKMEN İ., TÜRK A.
2. INTERNATIONAL BLACK SEA MODERN SCIENTIFIC RESEARCH CONGRESS, Türkiye, 29 Eylül - 02 Ekim 2022, (Tam Metin Bildiri)

Study on Oxidation Performance of Graphene Oxide Structures by Optimization of KMnO4

SARGIN F., AK AZEM N. F., KANBUR K., BİRLİK I., TÜRK A.
AL FARABI 4 th INTERNATIONAL CONFERENCE ON APPLIED SCIENCES, Türkiye, 19 - 20 Ağustos 2022, (Tam Metin Bildiri)

VARIOUS DRYING METHODS FOR PRODUCING GRAPHENE OXIDE STRUCTURE

KANBUR K., BİRLİK I., SARGIN F., AK AZEM N. F., TÜRK A.
HODJA AKHMET YASSAWI 6th International Conference on Scientific Research, Azerbaycan, 13 - 15 Mayıs 2022, (Tam Metin Bildiri)

PRODUCTION AND CHARACTERIZATION OF GRAPHENE OXIDE BY ULTRASOUND-ASSISTED HUMMERS METHOD

SARGIN F., AK AZEM N. F., KANBUR K., BİRLİK I., TÜRK A.
ÇUKUROVA 8TH INTERNATIONAL SCIENTIFIC RESEARCHES CONFERENCE, Türkiye, 15 - 17 Nisan 2022, (Tam Metin Bildiri)

Investigation of the Effect of Vacuum Drying Conditions on Graphene Oxide Production

SARGIN F., AK AZEM N. F., KANBUR K., BİRLİK I., TÜRK A.
16. MAS International European Conference on Mathematics, Engineering, Natural Medical Sciences, Mardin, Türkiye, 22 Şubat 2022, ss.485-486, (Özet Bildiri)

Investigation the Effect of pH Value in GO Production

KANBUR K., BİRLİK I., SARGIN F., AK AZEM N. F., TÜRK A.
EUROASIA International Congress on Scientific Researches and Recent Trends-IX, Antalya, Türkiye, 18 Şubat 2022, ss.59-61, (Özet Bildiri)

Productıon of LaFeO3 nanopowders at low temperature by sol-gel method

ÇOBAN ÖZKAN D., AKALIN S. A., TÜRK A., ÇELİK E.
5th International Conference on Engineering and Natural Sciences (ICENS 2019), prag, Çek Cumhuriyeti, 12 Haziran 2019, (Tam Metin Bildiri)

Sol-Gel Synthesis And Characterization OfTitanium Dioxide Powder

ÇOBAN ÖZKAN D., AKALIN S. A., TÜRK A., ÇELİK E.
5TH INTERNATIONAL CONFERENCE ONENGINEERING AND NATURAL SCIENCES, 12 - 16 Haziran 2019, (Tam Metin Bildiri)

EFFECT OF HEAT TREATMENT ON MG-DOPED HYDROXYAPATITE POWDERS

SARGIN F., KANBUR K., TÜRK A.
V. INTERNATIONAL CONFERENCE ON ENGINEERING AND NATURAL SCIENCE (ICENS), 12 - 16 Haziran 2019

Synthesis and Characterization of the AG and CU Doped Hydroxiapetite

TÜRK A., SARGIN F., KANBUR K., AKDEMİR B. Ş., TÜRKMEN İ.
V. International Conference on Engineering and Natural Science, 12 - 16 Haziran 2019

Ferroelectric Photovoltaic Cells

TÜRK A., ÇOBAN ÖZKAN D., ÇELİK E.
3rd International Conference on Engineering Technology and Applied Sciences (ICETAS), Skopje, Makedonya, 17 Temmuz 2019, ss.163, (Özet Bildiri)

Bolt types and production with cold forming

ÇOBAN ÖZKAN D., TÜRK A.
2. Internatıonal Vocatıonal Scıence Symposıum (IVSS 2018), Antalya, Türkiye, 26 Nisan 2018, (Özet Bildiri)

Ferrolektric Materials

ÇOBAN ÖZKAN D., TÜRK A., ÇELİK E.
2. Internatıonal Vocatıonal Scıence Symposıum (IVSS 2018), Antalya, Türkiye, 26 Nisan 2018, (Özet Bildiri)

projection welding and using areas

ÇOBAN ÖZKAN D., TÜRK A., UZUN R. O.
2. Internatıonal Vocatıonal Scıence Symposıum (IVSS 2018), Antalya, Türkiye, 26 Nisan 2018, (Özet Bildiri)

Synthesis of the Ag and Cu Doped Hydroxyapatite

SARGIN F., TÜRK A., KANBUR K., AKDEMİR YILMAZ B. Ş., TÜRKMEN İ.
3rd International Conference on Engineering Technology and Applied Sciences (ICETAS 2018), Skopje, Makedonya, 17 - 21 Temmuz 2018, ss.198, (Özet Bildiri)

In Vitro Biodegredation of ion Substituted Hydroxyapatıie Powders

KANBUR K., SARGIN F., TÜRKMEN İ., AKDEMİR YILMAZ B. Ş., TÜRK A.
3rd International Conference on Engineering Technology and Applied Sciences (ICETAS 2018), Skopje, Makedonya, 17 - 21 Temmuz 2018, ss.190, (Özet Bildiri)

In Vitro Biodegredation of Ion Substituted Hydroxyapatite Powders

SARGIN F., KANBUR K., TÜRKMEN İ., AKDEMİR B. Ş., TÜRK A.
3rd International Conference on Engineering Technology and Aplied Sciences (ICETAS 2018), 17 - 21 Temmuz 2018

Effects of Different Parameters on Adhesion Degree of Splats in Flame and Plasma Spray Coatings

KANBUR K., ERDOĞAN G., TÜRK A.
3rd International Conference on Engineering Technology and Aplied Sciences (ICETAS 2018), 17 - 21 Temmuz 2018, (Özet Bildiri)

Development of Photovoltaic Cells

ÇELİK E., ÇOBAN ÖZKAN D., TÜRK A.
7th Global Conference on Global Warming (GCGW-2018), 24 - 28 Haziran 2018, (Tam Metin Bildiri)

Effect of the Different Substrate Temperature on the Dissolution Behavior in Hydroxyapatite Coated Ti6Al4V Alloys

KANBUR K., ERDOĞAN G., TÜRK A.
The Second International Biomedical Engineering Congress (IBMEC 2018), 24 - 27 Mayıs 2018, (Özet Bildiri)

Comparison of Hydroxyapatite Coatings Produced Different Powder Morphology

ERDOĞAN G., ÜSTEL F., TÜRK A.
5th International Symposium on Innovative Technologies in Engineering and Science, Baku, Azerbaycan, 29 - 30 Eylül 2017, (Tam Metin Bildiri)

Biocompatible Coating of Polyetheretherketone Biomaterials and Its Characterization

SARGIN F., ERDOĞAN G., TÜRK A.
5th International Symposium on Innovative Technologies in Engineering and Science, 29 - 30 Eylül 2017, (Tam Metin Bildiri)

Characterization of Ion Substituted CalciumPhosphate Apatites Produced via Sol-GelMethod

TÜRK A., SARGIN F.
ISITES2017, 29 - 30 Eylül 2017, (Tam Metin Bildiri)

Isothermal Oxidation Behavior and Kinetics of TBC Produced by APS HVOF and CGDS Techniques

KARAOĞLANLI A. C., TÜRK A., ÖZDEMİR İ.
7th Rencontres Internationales sur la Projection Thermique, 9 - 11 Aralık 2015, (Tam Metin Bildiri)

A General Overview to Thermal Spray Coating Processes Plasma Spray Coatings

KARAOĞLANLI A. C., TÜRK A.
The third International Symposium on Innovative Technologies in Engineering and Science (ISITES 2015), 2 - 04 Haziran 2015, ss.494-498, (Tam Metin Bildiri)

On the austempering behaviour and toughness of austempered engineering grade ductile iron castings

Kisakurek S., Ozel A., Yalcin Y., Turk A., Akbulut H., Okumus S.
70th World Foundry Congress 2012, WFC 2012, Monterrey, Meksika, 25 - 27 Nisan 2012, ss.546-558, (Tam Metin Bildiri) identifier

Plazma Püskürtme Yöntemi İle Çeliklerin A 12Si SiC Kompozit Kaplamaların Üretilmesi ve Karakterizasyonu

TÜRK A., ÜSTEL F., ALTUNCU E., KAYRAL S.
1. Uluslararası Yüzey İşlemleri Sempozyumu, 15 - 18 Haziran 2011, (Tam Metin Bildiri)

Comparatıon of Performance of TWEA Sprayed Zınc and Zınc Alumınum 85 15 Coatıngs For Ductıle Iron Pıpe Protectıon Agaınst Corrosıon

GULEC A., CEVHER Ö., TÜRK A., ÜSTEL F., YILMAZ F.
International Thermal Spray Conference & Exposition, Maastricht, The Netherlands, 2 - 04 Haziran 2008, (Tam Metin Bildiri)

Microstructural, Mechanical and Thermal Properties of HVOF Sprayed NiAl Coatings

ÇULHA O., TÜRK A., ÇELİK E.
13.International Metallurgy Congress, İstanbul, Türkiye, 09 Kasım 2006, (Tam Metin Bildiri)

Wear behaviour of plasma sprayed WC-Ni coatings

Tekmen Ç., ÇETİNEL H., TÜRK A., ÇELİK E.
Proceedings of the 8th Conference and Exhibition of the European Ceramic Society, İstanbul, Türkiye, 29 Haziran - 03 Temmuz 2003, cilt.264-268, ss.589-592, (Tam Metin Bildiri) identifier identifier
Metrikler

Yayın

67

Atıf (WoS)

375

H-İndeks (WoS)

10

Atıf (Scopus)

776

H-İndeks (Scopus)

16

Atıf (Sobiad)

40

H-İndeks (Sobiad)

3

Proje

27

Tez Danışmanlığı

17
BM Sürdürülebilir Kalkınma Amaçları