Metrics
Publication
40
Open Access
1
Education
2004 - 2010
2004 - 2010Doctorate
Gazi University, Fen Bilimleri Enstitüsü, Turkey
1999 - 2002
1999 - 2002Postgraduate
Marmara University, Institute For Graduate Studies İn Pure And Applied Sciences, Turkey
1994 - 1998
1994 - 1998Undergraduate
Gazi University, Teknik Eğitim Fakültesi, Turkey
Dissertations
2010
2010Doctorate
Endüstriyel tip ısı pompalı kurutucuda, çekirdeksiz üzümün kurutulması ve enerji analizinin deneysel olarak yapılması
Gazi University, Fen Bilimleri Enstitüsü
2002
2002Postgraduate
Jeotermal enerjili üzüm kurutma sistemi tasarımı
Marmara University, Institute For Graduate Studies İn Pure And Applied Sciences
Foreign Languages
English
Research Areas
Engineering and Technology
Academic Positions
2020 - Present
2020 - PresentAssociate Professor
Manisa Celal Bayar University, AKHİSAR MESLEK YÜKSEKOKULU, MAKİNE VE METAL TEKNOLOJİLERİ
2011 - 2020
2011 - 2020Assistant Professor
Manisa Celal Bayar University, AKHİSAR MESLEK YÜKSEKOKULU, MAKİNE VE METAL TEKNOLOJİLERİ
Managerial Experience
2012 - Present
2012 - PresentManisa Celal Bayar University
Non Academic Experience
2005 - 2011
2005 - 2011Teknik Öğretmen
Org. Kenan Evren Endüstri Meslek Lisesi/Tesisat Teknolojisi Bölümü/Alaşehir-MANİSA, Teknik Öğretmen
1999 - 2005
1999 - 2005Teknik Öğretmen
Ümraniye Endüstri Meslek Lisesi/Doğalgaz ve Isıtma Bölümü/Ümraniye-İSTANBUL, Teknik Öğretmen
Courses
Associate Degree
Associate Degree
Teknik Resim
Meslek Etiği
İklimlendirme ve Soğutma Teknolojileri
Kalite Güvence ve Standartları
Ofis Yazılımları
İşyeri Uygulama Eğitimi
Doğalgaz Tesisatı
Araştırma Yöntem ve Teknikleri
Sosyal Sorumluluk
Bilgisayar Destekli Çizim
Sistem Analizi ve Tasarımı
Bilgisayar Destekli Tasarım
Bilgisayar Destekli Çizim I
Meslek Resim
Isıtma ve Soğutma Sistemleri
Mesleki Yabancı Dil
Termodinamik
Soğutma Tekniği
Bilgisayar Destekli Çizim II
Supervised Theses
2019
2019Postgraduate
Güneş enerjili hava kollektöründe gizli ve duyulur ısı enerjisi depolamanın deneysel incelenmesi
ABUŞKA M. (Advisor)
A.KAYAPUNAR(Student)
Articles
All (22)
SCI-E, SSCI, AHCI (18)
SCI-E, SSCI, AHCI, ESCI (18)
Scopus (19)
TRDizin (4)
2024
20241. The Thermal Performance of The Plate-fin Heat Sink under Natural Convection at Different Power Levels and Ambient Temperatures
ABUŞKA M., ÇORUMLU V.
Celal Bayar Üniversitesi Fen Bilimleri Dergisi
, vol.20, no.3, pp.91-99, 2024 (Peer-Reviewed Journal)
2024
20242. Sun-infrared heating film drying analysis of Sultana seedless grapes: Operating modes
ÇOBAN H., Şevik S., ABUŞKA M.
Thermal Science and Engineering Progress
, vol.54, 2024 (SCI-Expanded)
2024
20243. Evaluation of prediction and modeling performance using machine learning methods for thermal parameters of heat sinks under forced convection: The case of external validation
ÇORUMLU V., ALTINTAŞ V., ABUŞKA M.
International Communications in Heat and Mass Transfer
, vol.151, 2024 (SCI-Expanded, Scopus)
2024
20244. Drying of Sultana seedless (Vitis vinifera L.) grape variety in indirect drying chamber using solar air collector with conic dimpled absorber: The case of end-season drying
ÇOBAN H., ABUŞKA M.
Renewable Energy
, vol.220, 2024 (SCI-Expanded)
2023
20235. Plaka Kanatlı Isı Dağıtıcı Termal Performansının Deneysel Olarak Zorlanmış Konveksiyonda İncelenmesi
ÇORUMLU V., ABUŞKA M.
Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji
, vol.11, no.4, pp.951-965, 2023 (Peer-Reviewed Journal)
2023
20236. A comparative experimental performance evaluation of solar air collector having absorber plate with convex oval-trench dimple
ABUŞKA M., Şevik S., Özdilli Ö.
Heat and Mass Transfer/Waerme- und Stoffuebertragung
, vol.59, no.10, pp.1871-1894, 2023 (SCI-Expanded)
2023
20237. A comparative experimental thermal performance analysis of conical pin fin heat sink with staggered and modified staggered layout under forced convection
ABUŞKA M., ÇORUMLU V.
Thermal Science and Engineering Progress
, vol.37, 2023 (SCI-Expanded, Scopus)
2022
20228. Experimental investigation of relative roughness height effect in solar air collector with convex dimples
Şevik S., Özdilli Ö., ABUŞKA M.
Renewable Energy
, vol.194, pp.100-116, 2022 (SCI-Expanded)
2021
20219. Experimental and numerical investigation on the thermal performance of linear LED housings under forced convection
ABUŞKA M., Şevik S., Özdilli Ö.
International Communications in Heat and Mass Transfer
, vol.128, 2021 (SCI-Expanded)
2021
202110. Experimental and numerical investigation of thermal performance in solar air heater with conical surface
ABUŞKA M., Kayapunar A.
Heat and Mass Transfer/Waerme- und Stoffuebertragung
, vol.57, no.11, pp.1791-1806, 2021 (SCI-Expanded)
2020
202011. Thermal performance analysis of a novel linear LED housing with inner and outer fins
Şevik S., ABUŞKA M., Özdilli Ö.
International Communications in Heat and Mass Transfer
, vol.119, 2020 (SCI-Expanded)
2020
202012. Enhancing the thermal performance of a solar air heater by using single-pass semi-flexible foil ducts
Şevik S., ABUŞKA M.
Applied Thermal Engineering
, vol.179, 2020 (SCI-Expanded)
2020
202013. Experimental performance analysis of sensible heat storage in solar air collector with cherry pits/powder under the natural convection
ABUŞKA M., Şevik S., Kayapunar A.
Solar Energy
, vol.200, pp.2-9, 2020 (SCI-Expanded)
2019
201914. Comparative energy and exergy performance investigation of forced convection solar air collectors with cherry stone/powder
ABUŞKA M., Şevik S., Kayapunar A.
Renewable Energy
, vol.143, pp.34-46, 2019 (SCI-Expanded)
2019
201915. Experimental analysis of solar air collector with PCM-honeycomb combination under the natural convection
ABUŞKA M., Şevik S., Kayapunar A.
Solar Energy Materials and Solar Cells
, vol.195, pp.299-308, 2019 (SCI-Expanded)
2019
201916. A comparative investigation of the effect of honeycomb core on the latent heat storage with PCM in solar air heater
ABUŞKA M., Şevik S., Kayapunar A.
Applied Thermal Engineering
, vol.148, pp.684-693, 2019 (SCI-Expanded)
2019
201917. Thermal performance of flexible air duct using a new absorber construction in a solar air collector
Şevik S., ABUŞKA M.
Applied Thermal Engineering
, vol.146, pp.123-134, 2019 (SCI-Expanded)
2018
201818. The effect of blowing direction on heat sink performance by thermal imaging
ABUŞKA M., Şevik S., ALTINTAŞ V.
Journal of Thermal Engineering
, vol.4, no.6, pp.2470-2480, 2018 (Scopus)
2018
201819. Energy and exergy analysis of solar air heater having new design absorber plate with conical surface
ABUŞKA M.
Applied Thermal Engineering
, vol.131, pp.115-124, 2018 (SCI-Expanded)
2017
201720. Yutucu Plaka Üzerine Konik Yayların Yerleştirildiği Güneş Enerjili Hava Kollektörünün Bulanık Mantık ile Modellenmesi
ABUŞKA M., AKGÜL M. B., ALTINTAŞ V.
Politeknik Dergisi , vol.20, no.4, pp.907-914, 2017 (Peer-Reviewed Journal)
2017
201721. Energy, exergy, economic and environmental (4E) analyses of flat-plate and V-groove solar air collectors based on aluminium and copper
ABUŞKA M., Şevik S.
Solar Energy
, vol.158, pp.259-277, 2017 (SCI-Expanded)
2016
201622. Experimental Study on Thermal Performance of a Novel Solar Air Collector Having Conical Springs on Absorber Plate
ABUŞKA M., AKGÜL M. B.
Arabian Journal for Science and Engineering
, vol.41, no.11, pp.4509-4516, 2016 (SCI-Expanded)
Papers Presented at Peer-Reviewed Scientific Conferences
2024
20241. Effect of flow rate on nocturnal cooling performance of solar air collector
ABUŞKA M.
19th International Istanbul Scientific Research Congress on Life, Engineering, Architecture, and Mathematical Sciences, İstanbul, Turkey, 16 - 18 November 2024, pp.130-131, (Summary Text)
2024
20242. GÜNEŞ ENERJİLİ HAVA KOLLEKTÖRÜNÜN NEGATİF ELEKTROMANYETİK RADYASYON (GECE ETKİSİ) KOŞULLARINDA SOĞUTMA PERFORMANSININ İNCELENMESİ
ABUŞKA M.
ASES VIII. INTERNATIONAL HEALTH, ENGINEERING AND SCIENCES CONFERENCE APRIL 06-07 2024, IZMIR, TURKIYE, İzmir, Turkey, 6 - 07 April 2024, pp.61-62, (Summary Text)
2019
20193. Performance investigation of solar collector with staggered array concave dimple roughened absorber plate
ABUŞKA M., ŞEVİK S.
International Journal of Arts Sciences (IJAS) American Canadian Conference for Academic Disciplines, 11 - 14 June 2019
2019
20194. Thermal performance of standard and stripe painted absorber plate in solar air collectors
ŞEVİK S., ABUŞKA M.
International Journal of Arts Sciences (IJAS) American Canadian Conference for Academic Disciplines, 11 - 14 June 2019
2018
20185. Experimental Investigation of Sensible Heat Storage with Cherry Pits in Solar Air Collector
Kayapunar A., ABUŞKA M., ŞEVİK S.
14th International Conference on Energy Storage, Adana, Turkey, 25 - 28 April 2018, pp.1082-1092, (Full Text)
2018
20186. Experimental Investigation of the Effect of Using Honeycomb Core on the Latent Heat Storage in Solar Air Collector
Kayapunar A., ABUŞKA M., ŞEVİK S.
14th International Conference on Energy Storage, Adana, Turkey, 25 - 28 April 2018, pp.1093-1103, (Full Text)
2017
20177. Prediction of the Outlet Air Temperature of Solar Air Collector with Artificial Neural Network
ABUŞKA M., ALTINTAŞ V., ŞEVİK S.
International Conference on Energy and Thermal Engineering, İstanbul, Turkey, 25 - 28 April 2017, pp.204-208, (Full Text)
2017
20178. The Effect of Blowing Direction on Heat Sink Performance by Thermal Imaging
ABUŞKA M., ŞEVİK S., ALTINTAŞ V.
International Conference on Energy and Thermal Engineering, İstanbul, Turkey, 25 - 28 April 2017, pp.563-568, (Full Text)
2017
20179. The Effect of Glass and Polycarbonate Cover Usage on the Efficiency of Solar Air Heater
ABUŞKA M., ŞEVİK S.
International Conference on Energy and Thermal Engineering, İstanbul, Turkey, 25 - 28 April 2017, pp.125-128, (Full Text)
2016
201610. Outlet Temperature Prediction of Trapeze Solar Air Heater with Fuzzy Logic Model
ABUŞKA M., ALTINTAŞ V.
8th International Ege Energy Syposium, 11 - 13 May 2016, (Full Text)
2016
201611. Thermal performance of natural convection solar air collector with conical surface geometry for vertical application
ABUŞKA M., ALTINTAŞ V.
8th International Ege Energy Syposium, 11 - 13 May 2016, (Full Text)
2015
201512. Konik Yüzey Geometrili Güneş Enerjili Hava Kollektörünün Dikey Uygulamada Isıl Verim Analizi
ABUŞKA M., AKGÜL M. B., ALTINTAŞ V.
20. Ulusal Isı Bilimi ve Tekniği Kongresi (ULIBTK’15), Balıkesir, Turkey, 2 - 05 September 2015, pp.444-450, (Full Text)
2015
201513. Yutucu Plaka Üzerine Konik Yayların Yerleştirildiği Güneş Enerjili Hava Kollektörünün Isıl Verim Analizi ve Yapay Sinir Ağları ile Modellenmesi
ALTINTAŞ V., AKGÜL M. B., ABUŞKA M.
12. Ulusal Tesisat Mühendisliği Kongresi, İzmir, Turkey, 8 - 11 April 2015, vol.2, pp.1805-1816, (Full Text)
2015
201514. Artificial Neural Network Modeling of the Thermal Performanceof a Novel Solar Air Absorber Plate
ABUŞKA M., AKGÜL M. B., ALTINTAŞ V.
ISITES 2015, 3 - 05 June 2015, (Full Text)
2015
201515. YUTUCU PLAKA ÜZERİNE KONİK YAYLARINYERLEŞTİRİLDİĞİ GÜNEŞ ENERJİLİ HAVAKOLLEKTÖRÜNÜN ISIL VERİM ANALİZİ VE YAPAY SİNİRAĞLARI İLE MODELLENMESİ
ALTINTAŞ V., AKGÜL M. B., ABUŞKA M.
12. ULUSAL TESĠSAT MÜHENDĠSLĠĞĠ KONGRESĠ, Turkey, 8 - 11 April 2015, (Full Text)
2014
201416. Güneş Enerjili Hava Kollektöründe Selektif Boya Kullanımının Isıl Verime Etkisinin Deneysel Olarak İncelenmesi
ABUŞKA M., AKGÜL M. B.
2nd International Symposium on Innovative Technologies in Engineering and Science, Karabük, Turkey, 18 - 20 June 2014, pp.1594-1602, (Full Text)
2014
201417. The Modelling of Solar Air Collector with Thermal Efficiency Analysis and Artificial Neural Networks
ABUŞKA M., ALTINTAŞ V., AKGÜL M. B.
International Conference on Thermophysical and Mechanical Properties of Advanced Materials 3rd Rostocker Symposium on Thermophysical Properties for Technical Thermodynamics, Çeşme/İzmir, Turkey, 12 - 15 June 2014, pp.58-65, (Full Text)
2003
200318. Jeotermal Enerjili Üzüm Kurutma Sistem Tasarımı
ABUŞKA M., BİNARK A. K.
3. Uluslar Arası İleri Teknolojiler Sempozyumu, Ankara, Turkey, 18 - 20 August 2003, vol.4, pp.180-195, (Full Text)
Funded Projects
2017 - 2018
2017 - 2018Güneş Enerjili Hava Kollektöründe Gizli ve Duyulur Isı Enerjisi Depolamanın Deneysel İncelenmesi
Project Supported by Higher Education Institutions
ABUŞKA M. (Executive), Kayapunar A.
2013 - 2015
2013 - 2015Konik Yüzey Geometrili Güneş Enerjili Hava Isıtma Kollektörünün Geliştirilmesi ve Çekirdeksiz Üzüm için Kurutma Parametrelerinin Belirlenerek Enerji Analizinin Yapılması
Project Supported by Higher Education Institutions
ABUŞKA M. (Executive), AYDIN Y., ÇOBAN H.