Yayınlar & Eserler

Yayın Ağı
SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler 10

1. Biomechanical effects of three different configurations in Salter Harris type 3 distal femoral epiphyseal fractures

Gok K., Inal S., Gok A., PİNAR A. M.
Journal of the Brazilian Society of Mechanical Sciences and Engineering , cilt.39, sa.4, ss.1069-1077, 2017 (SCI-Expanded) Creative Commons License identifier

2. Corrosion resistance and mechanical properties of quenched and tempered 28mncrb5 steel in two acidic environments korrosionwiderstand und mechanische eigenschaften eines abgeschreckten 28mncrb5-stahles in zwei sauren umgebungen

YAZICI A., ZEYBEK M. S., GÜLER H., Izmir I., PİNAR A. M., Manisa M., et al.
Materialpruefung/Materials Testing , cilt.59, sa.3, ss.221-225, 2017 (SCI-Expanded) identifier

3. A comparison of cooling methods in the pocket milling of AA5083-H36 alloy via Taguchi method

PİNAR A. M., FİLİZ S., Ünlü B. S.
International Journal of Advanced Manufacturing Technology , cilt.83, sa.9-12, ss.1431-1440, 2016 (SCI-Expanded) identifier

4. Microstructural properties of particle-reinforced polytetrafluoroethylene composite bearings after wear

Ünlü B., Uzkut M., PİNAR A. M., Özdin K.
Materials Science , cilt.51, sa.2, ss.194-199, 2015 (SCI-Expanded) identifier identifier

5. Mechanical properties of heat treated iron based compacts

Çavdar U., Ünlü B. S., PİNAR A. M., ATİK E.
Materials and Design , cilt.65, ss.312-317, 2015 (SCI-Expanded) identifier identifier

6. Optimization of Process Parameters with Minimum Surface Roughness in the Pocket Machining of AA5083 Aluminum Alloy via Taguchi Method

PİNAR A. M.
Arabian Journal for Science and Engineering , cilt.38, sa.3, ss.705-714, 2013 (SCI-Expanded) identifier identifier

7. Statistical investigation of hydraulic driven circular interpolation motions

PİNAR A. M., Gullu A., TAŞKIN S.
Sadhana - Academy Proceedings in Engineering Sciences , cilt.37, sa.5, ss.557-568, 2012 (SCI-Expanded) Creative Commons License identifier identifier

8. Optimization of numerical controlled hydraulic driven positioning system via taguchi method Sayisal deneti̇mli̇ hi̇droli̇k pozi̇syonlama si̇stemi̇ni̇n taguchi metodu i̇le opti̇mi̇zasyonu

PİNAR A. M., Güllü A.
Journal of the Faculty of Engineering and Architecture of Gazi University , cilt.25, sa.1, ss.93-100, 2010 (SCI-Expanded) identifier

9. Optimization of counter flow Ranque-Hilsch vortex tube performance using Taguchi method

PİNAR A. M., ULUER O., Kirmaci V.
International Journal of Refrigeration , cilt.32, sa.6, ss.1487-1494, 2009 (SCI-Expanded) identifier identifier

10. Statistical assessment of counter-flow vortex tube performance for different nozzle numbers, cold mass fractions, and inlet pressures via taguchi method

PİNAR A. M., ULUER O., Kırmacı V.
Experimental Heat Transfer , cilt.22, sa.4, ss.271-282, 2009 (SCI-Expanded) identifier identifier
Diğer Dergilerde Yayınlanan Makaleler 1

1. Modelling of surface roughness performance of coated cemented carbide groove cutting tool via Artificial Neural Networks

PİNAR A. M.
Gazi University Journal of Science , cilt.24, sa.4, ss.901-910, 2011 (Scopus) identifier identifier
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 9

1. Failure Characterıstıcs of Glass Fiber Epoxy Composıte Joint Structures Exposed to Accelerated Aging Process

SOYKÖK İ. F., PİNAR A. M., AYDIN İ.
International Science and Technology Conference, Viyana, Avusturya, 13 - 15 Temmuz 2016, ss.487, (Özet Bildiri)

2. İzmir Aliağa Bölgesinde Rüzgar Türbinlerinin Yüksekliğe Bağlı Enerji Değişimlerinin İncelenmesi

AYDIN İ., PİNAR A. M., SOYKÖK İ. F.
International Science and Technology Conference, viyana, Avusturya, 13 - 15 Temmuz 2016, (Özet Bildiri)

3. İzmir Aliağa Bölgesinde Rüzgâr Türbinlerinin Yüksekliğe Bağlı Enerji Değişimlerinin İncelenmesi

AYDIN İ., PİNAR A. M., SOYKÖK İ. F.
International Science and Technology Conference, Vienna-Austria, Viyana, Avusturya, 13 - 15 Temmuz 2016, ss.720, (Özet Bildiri)

4. Wear Behavior Optimization of Multi Directional Cutting Tools in The Rough Turning Of AISI 4140

PİNAR A. M., AYDIN İ., SOYKÖK İ. F.
International Science and Technology Conference, viyana, Avusturya, 13 - 15 Temmuz 2016, (Özet Bildiri)

5. Failure Characteristics of Glass Fiber Epoxy Composite Joint Structures Exposed to Accelerated Aging Process

SOYKÖK İ. F., PİNAR A. M., AYDIN İ.
International Science and Technology Conference, viyana, Avusturya, 13 - 15 Temmuz 2016, ss.487, (Özet Bildiri)

6. İZMİR ALİAĞA BÖLGESİNDE RÜZGAR TÜRBİNLERİNİN YÜKSEKLİĞE BAĞLI ENERJİDEĞİŞİMLERİNİN İNCELENMESİ

AYDIN İ., PİNAR A. M., SOYKÖK İ. F.
International Science and Technology Conference 2016 (ISTEC 2016), VİYANA, Avusturya, 13 - 15 Temmuz 2016, (Özet Bildiri)

7. Statistical Optimization of Surface Roughness and Burr Width Quality Characteristics in the Milling of AA5083 H36 Alloy

PİNAR A. M., FİLİZ S., SOYKÖK İ. F., YAZICI A.
INTERNATIONAL CONGRESS ON NATURAL AND ENGINEERING SCIENCES, 9 - 13 Eylül 2015, (Özet Bildiri)

8. An Investigation into the Mechanical Performances of Bonded Single Lap Composite Joints after Exposure to Axial Impacts at Various Temperatures

SOYKÖK İ. F., PİNAR A. M., SAYMAN O.
INTERNATIONAL CONGRESS ON NATURAL AND ENGINEERING SCIENCES, 9 - 13 Eylül 2015, (Özet Bildiri)

9. MODELLING OF POSITIONING ACCURACY OF HYDRAULIC DRIVEN CURVILINEAR MOTIONS

PİNAR A. M., GÜLLÜ A., PARALI L.
5th International Advanced Technologies Symposium, Karabük, Türkiye, 13 - 15 Mayıs 2009, (Tam Metin Bildiri)
Metrikler

Yayın

20

Yayın (WoS)

7

Yayın (Scopus)

11

Atıf (WoS)

177

H-İndeks (WoS)

4

Atıf (Scopus)

272

H-İndeks (Scopus)

7

Proje

8

Tez Danışmanlığı

3

Açık Erişim

2