EVALUATION OF LABORATORY PERFORMANCE OF ZYCOTHERM ADDITIVE FOR EXTENDED MOISTURE RESISTANCE OF HMA PAVEMENTS
International Civil Engineering & Architecture Conference (ICEARC 2019), Trabzon, Türkiye, 17 - 20 Nisan 2019, (Yayınlanmadı)
- Yayın Türü: Bildiri / Yayınlanmadı
- Basıldığı Şehir: Trabzon
- Basıldığı Ülke: Türkiye
- Açık Arşiv Koleksiyonu: AVESİS Açık Erişim Koleksiyonu
- Manisa Celal Bayar Üniversitesi Adresli: Evet
Özet
Moisture induced damage is one of the major distresses in asphalt concrete pavements. The failures occur when the asphalt binder strip off from the aggregate due primarily to the action of moisture, and thereby reducing the strength of asphalt concrete. In this study, the performance of ZycoTherm® -a nano-organosilane additive- was evaluated on various asphalt mixtures for moisture damage and stripping. The samples were prepared according to the Marshall mixture design method, using two types of basalt aggregates with and without ZycoTherm® additive. After the mixture design, a number of performance tests were conducted i.e., stripping, bottle rolling and boil tests. The study program mainly focused on testing the improvement of binder-aggregate bounding by ZycoTherm®, so that tests were repeated at extended conditioning times to compare with the normal (standard) testing conditions. Moreover, specimens were also tested in the sodium chloride (salt) solution to simulate the detrimental effect of de-icing agents on bitumen-aggregate bounding. In these tests, ZycoTherm® was evaluated for each aggregate type based on four test combinations as: normal condition, in 4% salt solution, normal condition with additive, with additive in 4% salt solution. In the Nicholson tests, the results showed that, the nanoorganosilane additive significantly improved the stripping resistance of the mixtures of both aggregates at all extended conditioning times. The results were even better in the salt solution, almost no resistance loss for the mixtures with ZycoTherm®. In the boiling tests, ZycoTherm® was quite effective when the mixtures were tested in the normal conditions and was able to maintain the stripping resistance of mixtures up to 360 minutes of boiling. However, significant bitumen loss was observed when tested in the salt solution. In the bottle rolling tests, the mixtures showed significant bitumen loss when the conditioning time extended from 6 hours to 48 hours. However, the mixtures with ZycoTherm® showed improved resistance to bitumen loss especially in the salt solution.