THERMAL FATIGUE BEHAVIOR OF ASPHALT CONCRETE UNDER CONSTANT AMPLITUDE STRAIN LOADING
94th Annual Meeting of Transportation Research Board (TRB 94th), Washington, Amerika Birleşik Devletleri, 11 - 15 Ocak 2015, (Yayınlanmadı)
- Yayın Türü: Bildiri / Yayınlanmadı
- Basıldığı Şehir: Washington
- Basıldığı Ülke: Amerika Birleşik Devletleri
- Açık Arşiv Koleksiyonu: AVESİS Açık Erişim Koleksiyonu
- Manisa Celal Bayar Üniversitesi Adresli: Evet
Özet
Thermal fatigue is another form of thermally induced distress in flexible pavements, leading to serious degradations of structural performance and service quality of roadways. Thermal fatigue cracks occur in moderate climates with considerable temperature variations and are the result of generated cyclic thermal strains/stresses within the restrained pavement layers. In this study, an experimental setup is developed in order to measure the thermal fatigue resistance of asphalt concrete specimens under constant strain amplitude loading. The test specimens are aged in the laboratory for a long duration of time and include variations of aggregate source, gradation, asphalt binder and asphalt content. To simulate thermal fatigue behavior of asphalt concrete, uniaxial loading is mechanically applied to achieve constant amplitude sinusoidal strains at a frequency of 0.01Hz. The strain amplitudes are calculated based on the measured thermal coefficients of the test specimens and the temperature differential corresponding to highest frequency for the city of Ankara. The results of experiments used in the statistical analysis of variance include three response parameters as 35 % reduction of its initial stiffness, 50% reduction of its initial stiffness and the rate of reduction in the stiffness of the specimens. The results of statistical analyses indicate that the among the mixture design variables included in the testing program, the asphalt content, aggregate source and asphalt binder type have the strongest effect on the thermal fatigue resistance of asphalt concrete.